DISK IMAGE SETUP ---------------- $dd if=/dev/zero of=disk.img bs=1M count=1024 #creates a 1GB disk image $mkdir mnt BUILD ----- $make - The default the logging is enabled (into objfs.log file). Remove -DDBG from the Makefile to disable logging. - In the example implementation, caching is enabled. You need to disable it by removing -DCACHE C flag from the Makefile - use 'make clean' followed by 'make' after updating Makefile MOUNT ----- $./objfs mnt -o use_ino $ You can check successful mount using the following command. $mount | grep objfs TEST ---- Go inside the test directory and see the README. UNMOUNT ------- fusermount -u mnt