Fusion360-Posts

Collection of Posts I use in Fusion 360. So far only have for fanuc 0i-MD. Try it at your own risk.

Here are the changes made to the generic fanuc post from Fusion 360 Library:

Program name in the next line.
Time Stamp for when the file is post.
Simplified Description of tool list.
Sequence numbers according to tool change.

For Sequence numbers according to tool change:

skipBlock = !insertToolCall;
    //Added tool description and moved around M03 code for desired effect.
    writeBlock("\n" + "N"+ sequenceNumber +"\n"+"T" + toolFormat.format(tool.number), mFormat.format(6),"("+ xyzFormat.format(tool.diameter) +" "
    + getToolTypeName(tool.type)+")\n");
    //Added sequence number increment. Do not use the sequence number setting
    //Moving this operation comment after tool change
    sequenceNumber += 1;
    if (hasParameter("operation-comment")) {
      var comment = getParameter("operation-comment");
      if (comment && ((comment !== lastOperationComment) || !patternIsActive || insertToolCall)) {
        //writeln(""); Removed the line from making additional line
        writeComment(comment);
        lastOperationComment = comment;
      } else if (!patternIsActive || insertToolCall) {
        writeln("");
      }
    } else {
      writeln("");
    }

For presetter (modded-0406),

Using Metrol TM26D touch type presetter.

Added Presetter commands, M65, corresponding tool number and B-code when using manual nc Measure tool command.
Optional global tolerance U code in microns through the options.

User Defined Options

  globalPresetterTolerance: {
    title: "Presetter Tolerance",
    description: "Enable Global Tolerance",
    group: 0,
    type: "boolean",
    value: false,
    scope: "post"
  },
  toolPresetterTolerance: {
    title: "Global Presetter Tolerance (µ)",
    description: "Tolerance value 'u' in presetter",
    group: 0,
    type: "integer",
    value: 100,
    scope: "post"
  },

Actual Code

case COMMAND_TOOL_MEASURE:
    var measureTool;
    var globalPresetterTolerance = getProperty("globalPresetterTolerance");
    valuetoolPresetterTolerance = getProperty("toolPresetterTolerance")* 0.001;

    if (!measureTool && globalPresetterTolerance) {
      writeBlock(
        mFormat.format(65),
        "T" + toolFormat.format(tool.number),
        "B" + xyzFormat.format(tool.number),
        "U" + valuetoolPresetterTolerance,
      );
    measureTool = true;
    }
    else {
      writeBlock(
        mFormat.format(65),
        "T" + toolFormat.format(tool.number),
        "B" + xyzFormat.format(tool.number)
      );
    measureTool = true;
    
    };
    return;

Todo:

Sequence numbers according to Operation change.
Option to have P or dwell time value in the post selection, instead of hard no.
Tool by tool tolerance U code for presetter command.
Optional Presetter feed control based on individual tool.
Tool return to a designated home location.

rahul-sha/Fusion360-Posts

Fusion360-Posts