Overview ======== MMTests is a configurable test suite that runs a number of common workloads of interest to MM developers. Ideally this would have been to integrated with LTP, xfstests or Phoronix Test or implemented with autotest. Unfortunately, large portions of these tests are cobbled together over a number of years with varying degrees of quality before decent test frameworks were common. The refactoring effort to integrate with another framework is significant. Organisation ============ The top-level directory has a single driver script called run-mmtests.sh which reads a config file that describes how the benchmarks should be run, configures the system and runs the requested tests. config also has some per-test configuration items that can be set depending on the test. The driver script takes the name of the test as a parameter. Generally, this would be a symbolic name naming the kernel being tested. Each test is driven by a run-single-test.sh script which reads the relevant driver-TESTNAME.sh script. It should not be used directly. High level items such as profiling are configured from the top-level script while the driver scripts typically convert the config parameters into switches for a "shellpack". A shellpack is a pair of benchmark and install scripts that are all stored in shellpacks/ . Monitors can be optionally configured. A full list is in monitors/ . Care should be taken with monitors as there is a possibility that they introduce overhead of their own. Hence, for some performance sensitive tests it is preferable to have no monitoring. Many of the tests download external benchmarks. An attempt will be made to download from a mirror . To get an idea where the mirror should be located, grep for MIRROR_LOCATION= in shellpacks/. A basic invocation of the suite is <pre> $ cp configs/config-global-dhp__pagealloc-performance config $ ./run-mmtests.sh --no-monitor 3.0-nomonitor $ ./run-mmtests.sh --run-monitor 3.0-runmonitor </pre> Configuration ============= The config file used is always called "config". A number of other sample configuration files are provided that have a given theme. Some important points of variability are; MMTESTS is a list of what tests will be run LINUX_GIT is the location of a git repo of the kernel. At the moment it's only used during report generation SKIP_*PROFILE These parameters determine what profiling runs are done. Even with profiling enabled, a non-profile run can be used to ensure that the profile and non-profile runs are comparable. SWAP_CONFIGURATION SWAP_PARTITIONS SWAP_SWAPFILE_SIZEMB It's possible to use a different swap configuration than what is provided by default. TESTDISK_RAID_DEVICES TESTDISK_RAID_MD_DEVICE TESTDISK_RAID_OFFSET TESTDISK_RAID_SIZE TESTDISK_RAID_TYPE If the target machine has partitions suitable for configuring RAID, they can be specified here. This RAID partition is then used for all the tests TESTDISK_PARTITION Use this partition for all tests TESTDISK_FILESYSTEM TESTDISK_MKFS_PARAM TESTDISK_MOUNT_ARGS The filesystem, mkfs parameters and mount arguments for the test partitions TESTDISK_DIR A directory passed to the test. If not set, defaults to SHELLPACK_TEMP. The directory is supposed to contain a precreated environment (eg. a specifically created filesystem mounted with desired mount options). STORAGE_CACHE_TYPE STORAGE_CACHING_DEVICE STORAGE_BACKING_DEVICE It's also possible to use storage caching. STORAGE_CACHE_TYPE is either "dm-cache" or "bcache". The devices specified with STORAGE_CACHING_DEVICE and STORAGE_BACKING_DEVICE are used to create the cache device which then is used for all the tests. As MMTests downloads a number of benchmarks it is possible to create a local mirror. The location of the mirror is configured in WEBROOT in shellpacks/common-config.sh. For example, kernbench tries to download $WEBROOT/kernbench/linux-3.0.tar.gz . If this is not available, it is downloaded from the internet. This can add delays in testing and consumes bandwidth so is worth configuring. Available tests =============== Note the ones that are marked untested. These have been ported from other test suites but no guarantee they actually work correctly here. If you want to run these tests and run into a problem, report a bug. kernbench Builds a kernel 5 times recording the time taken to completion. An average time is stored. This is sensitive to the overall performance of the system as it hits a number of subsystems. multibuild Similar to kernbench except it runs a number of kernel compiles in parallel. Can be useful for stressing the system and seeing how well it deals with simple fork-based parallelism. aim9 Runs a short version of aim9 by default. Each test runs for 60 seconds. This is a micro-benchmark of a number of VM operations. It's sensitive to changes in the allocator paths for example. dbench3 Runs the dbench3 benchmark. This is an old benchmark but it is also a poor benchmark. The average results are sensitive to how long it was running as different portions of the command file have different throughput. This means that the exact time the benchmark stops makes a difference to average throughput. dbench3 when run asynchronously is sensitive to when background writeback or journalling takes place. High throughput figures may depend on the operations completing in memory before processes like kjournald (where applicable) or flushers kick in. If dbench does most of its work in memory then the throughput is artifically high. Running the benchmark in synchronous mode can offset this. Alterations to hold times of i_mutex can adversely affect dbench figures because in some cases long hold times can give an artifical boost to metadata modifications in memory without the results ever hitting the disk. Interpreting dbench3 figures can be a pain due to these limitations. However, it can still be useful as an early warning system. If dbench3 throws up something anomolous it is worth finding out the root cause and correlating it with other results. dbench4 Runs the dbench4 benchmark. This is in better shape than dbench3 in that it is more of an IO benchmark. It also reports on latencies of various different operations which is useful. ffsb The ffsb benchmark takes a workfile to simulate various different workloads. Support is there to generate profiles similar to what is used for evaulating btrfs. vmr-stream Runs the STREAM benchmark a number of times for varying sizes. An average is recorded. This can be used to measure approximate memory throughput or the average cost of a number of basic operations. It is sensitive to cache layout used for page faults. vmr-cacheeffects (untested) Performs linear and random walks on nodes of different sizes stored in a large amount of memory. Sensitive to cache footprint and layout. vmr-createdelete (untested) A micro-benchmark that measures the time taken to create and delete file or anonymous mappings of increasing sizes. Sensitive to changes in the page fault path performance. iozone A basic filesystem benchmark. fsmark This tests write workloads varying the number of files and directory depth. hackbench-* Hackbench is generally a scheduler benchmark but is also sensitive to overhead in the allocators and to a lesser extent the fault paths. Can be run for either sockets or pipes. largecopy This is a simple single-threaded benchmark that downloads a large tar file, expands it a number of times, creates a new tar and expands it again. Each operation is timed and is aimed at shaking out stall-related bugs when copying large amounts of data largedd Similar to largecopy except it uses dd instead of cp. libreofficebuild This downloads and builds libreoffice. It is a more aggressive compile-orientated test. This is a very download-intensive benchmark and was only created as a reproduction case for a bug. nas-* The NAS Parallel Benchmarks for the serial and openmp versions of the test. netperf-* Runs the netperf benchmark for *_STREAM on the local machine. Sensitive to cache usage and allocator costs. To test for cache line bouncing, the test can be configured to bind to certain processors. pipetest This is a scheduler ping-pong test where two processes send a byte to each other over a pipe to measure context switch latency. More details on the motivation behind the benchmark are available at http://thread.gmane.org/gmane.linux.kernel/1129232/focus=1129389 postmark This workload is a single-threaded benchmark intended to measure filesystem performance for many short-lived and small files. It is meant to simulate workloads like mail servers or web servers serving static files using a mix of data and metadata intensive operations. The main weakness is that it does not application processing and all the transactions are filesystem-based. The ratio of each operation type is not necessarily representative of anything. Optionally a program can be run in the background that consumes anonymous memory. The background program is vary rarely needed except when trying to identify desktop stalls during heavy IO. simple-writeback This is a simple writeback test based on dd. It's meant to be easy to understand and quick to run. Useful for measuring page writeback changes. speccpu (untested) SPECcpu, what else can be said. A restriction is that you must have a mirrored copy of the tarball as it is not publicly available. specjvm (untested) SPECjvm. Same story as speccpu specomp (untested) SPEComp. Same story as speccpu starve This is an old scheduler benchmark that was used to illustrate a particular bug in the O(1) scheduler. It's no longer really relevant but as it is a bug that occurred before, it may be worth monitoring. More details at http://www.hpl.hp.com/research/linux/kernel/o1-starve.php sysbench Runs the complex workload for sysbench backed by postgres. Running this test requires a significant build environment on the test machine. It can run either read-only or read/write tests. tiobench Threaded IO benchmark. ltp (untested) The LTP benchmark. What it is testing depends on exactly which of the suite is configured to run. ltp-pounder (untested) ltp pounder is a non-default test that exists in LTP. It's used by IBM for hardware certification to hammer a machine for a configured number of hours. Typically, they expect it to run for 72 hours without major errors. Useful for testing general VM stability in high-pressure low-memory situations. stress-highalloc This test requires that the system not have too much memory and that systemtap is available. Typically, it's tested with 3GB of RAM. It builds a number of kernels in parallel such that total memory usage is 1.5 times physical memory. When this is running for 5 minutes, it tries to allocate a large percentage of memory (e.g. 95%) as huge pages recording the latency of each operation as it goes. It does this twice. It then cancels the kernel compiles, cleans the system and tries to allocate huge pages at rest again. It's a basic test for fragmentation avoidance and the performance of huge page allocation. xfstests (untested) This is still at prototype level and aimed at running testcase 180 initially to reproduce some figures provided by the filesystems people. futexbench-* Collection of programs to measure a number of core futex operations related to the overall architecture. Specifically: (i) hash, (ii) wake, and (iii) requeue operations. Built on-top of the perf-bench infrastructure. Reporting ========= For reporting, there is a basic compare-kernels.sh script. It must be updated with a list of kernels you want to compare and in what order. It generates a table for each test, operation and kernel showing the relative performance of each. The test reporting scripts are in subreports/. compare-kernel.sh should be run from the path storing the test logs. By default this is work/log. If you are automating tests from an external source, work/log is what you should be capturing after a set of tests complete. If monitors are configured such as ftrace, there are additional processing scripts. They can be activated by setting FTRACE_ANALYSERS in compare-kernels.sh. A basic post-process script is mmtests-duration which simply reports how long an individual test took and what its CPU usage was. There are a limited number of graphing scripts included in report/ TODO ==== o Add option to test on filesystem loopback device stored on tmpfs o Add volanomark
rajesh-g92/mmtests
MMTests: Benchmarking framework primarily aimed at Linux kernel testing
ShellGPL-2.0