Photo by bep#7432.
| Count | Part |
|---|---|
| 1 | ATmega32A 40 pin DIP |
| 1 | 40 pin DIP socket |
| 1 | HRO-TYPE-C-M-12 |
| 1 | 500 mA polyfuse |
| 2 | 6mm momentary push buttons |
| 1 | 16 MHz quarz crystal |
| 1 | 4.7 uF electrolytic capacitor |
| 2 | 100 nF ceramic disk capacitor |
| 2 | 22 pF ceramic disk capacitor |
| 2 | 68 Ω resistor |
| 2 | 1.5 kΩ resistor |
| 2 | 5.1 kΩ resistor |
| 2 | 3.6 V zener diode |
| 53 | universal switching diode |
| 1 | EC11 encoder and knob (optional) |
There are three folders: bottom, main-pcb, plate. Inside each of them are a gerbers production folder, and a kicad source folder. Grab the gerber zip files from the gerbers folder.
The clear cover for the components is in the misc folder. There's also a foot you can laser cut to be used with the bottom. Needs M2 brass standoffs or screws to use.
https://github.com/qmk/qmk_firmware/tree/master/keyboards/rmi_kb/chevron
High profile case files (seen in the photo) are not provided.
The KiCAD project was made with KiCAD 5.1.4, and have not been updated.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This design may be freely produced, modified, and manufactured for PERSONAL USE ONLY and may not be reproduced in physical form for public sale.
