rancilio-pid/clevercoffee

Issues

• rename voltagesensortype-> ADD documentation

  #424 opened a year ago by LoQue90
  7

• MQTT: standbyModeTimeRemaining, always published

  #518 opened a month ago by LoQue90
  0

• HASSIO is flooding MQTT topics

  #517 opened a month ago by LoQue90
  0

• Steam Mode does not exit on Quickmill (Thermoblock) machines with PID only+

  #466 opened 2 months ago by FloR012
  3

• compiler warnings from onewire lib

  #514 opened 2 months ago by LoQue90
  0

• Kein zweiter Bezug möglich bei Verwendung von BREWCONTROL_TYPE = 2

  #507 opened 3 months ago by philkhn
  3

• Random reboots at startup (may be also during normal use)

  #478 opened 8 months ago by genkigenki
  6

• OTA monitor does not work anymore in current master

  #468 opened 9 months ago by genkigenki
  1

• No scale measurement shown if DISPLAYTEMPLATE == 4

  #463 opened 9 months ago by stefan23
  1

• Make temperature offset proportional

  #324 opened a year ago by krisraich
  16

• Pump starts when tank is empty and brew was manually canceled

  #451 opened 9 months ago by maunsen
  3

• MAX31865 PT100 temperature sensor support

  #266 opened 10 months ago by tbaumann
  1

• Inonsistent Brew switch behaviour - likely debounce missing

  #413 opened 10 months ago by genkigenki
  1

• Erratic behaviour of "Steam" switch when configured as push button

  #416 opened 10 months ago by genkigenki
  1

• Creating a vscode/settings.json for Consistent Code Formatting

  #395 opened a year ago by SphaeroX
  0

• Machine does not heat up after update to 3.3.0

  #409 opened a year ago by nasseralkmim
  6

• ESP32 - Offline-Modus Probleme mit Wifi / WLAN

  #370 opened a year ago by einencool
  37

• "Displayrotateupright.h" missing variable declaration

  #401 opened a year ago by Extraweich
  3

• MQTT not working after several hours

  #345 opened a year ago by locolc
  4

• wifi manager und Display

  #302 opened a year ago by murmeltier08
  4

• After first time setting WiFi credentials and connecting, Webserver is not reachable

  #323 opened 2 years ago by kjyv
  9

• Coldstart interrupted from shot

  #366 opened a year ago by LoQue90
  10

• Discord link on Website not valid anymore

  #387 opened a year ago by EulenspiegelTill
  1

• Test

  #381 opened a year ago by murmeltier08
  0

• InfluxDB: Skip certificate validation for TLS connections

  #296 opened a year ago by sway
  1

• Some issues with DS18B20 + IP address on the screen

  #343 opened a year ago by subcarpathia
  1

• PINMAPPING for Pressuresensor

  #364 opened a year ago by JonasB2602
  2

• clevercoffee.de is blank

  #372 opened a year ago by lassem
  4

• WiFi Manager problems

  #353 opened a year ago by nheilemann
  2

• Version 3.1.3 built for ESP32 and not ESP8266

  #352 opened 2 years ago by nheilemann
  2

• brew by weight and no display not possible

  #347 opened 2 years ago by LoQue90
  1

• PR 325 - no display not working

  #337 opened 2 years ago by murmeltier08
  1

• Pre select PID value table from Handbook

  #269 opened 2 years ago by cottec
  3

• PIN Mapping and platform ini to ignore list?

  #328 opened 2 years ago by murmeltier08
  1

• Brew detection not detecting that the brewing already stopped

  #319 opened 2 years ago by niklasarnitz
  5

• Empty Brew Detection section on Parameters page if Brewdetection is not enabled

  #316 opened 2 years ago by kjyv
  1

• MQTT-Topic for machine state

  #293 opened 2 years ago by gang-himself
  6

• Steamsetpoint missing on parameter site

  #279 opened 2 years ago by caibo84
  2

• Brewtimer ignores BREWSWITCHDELAY

  #297 opened 2 years ago by LoQue90
  2

• MQTT Topic for available

  #282 opened 2 years ago by Chillkroetchen
  13

• Brew time is not displayed over the entire brewing process

  #280 opened 2 years ago by Dual-0
  1

• Standard Display ohne shottimer, keine Brewtime

  #292 opened 2 years ago by murmeltier08
  0

• Temperature sensor pin on ESP32 board

  #290 opened 2 years ago by JojoDevel
  3

• Emergency Stop not in correct range

  #287 opened 2 years ago by cottec
  2

• Build Prozess failed Version 3.1.0

  #284 opened 2 years ago by Sascha-coffee
  2

• Set Steam setpoint via MQTT dosen´t work

  #281 opened 2 years ago by LoQue90
  0

• compile with 1 = DS18B20 sensor fails

  #278 opened 2 years ago by creisey
  4

• Pid Values out of range

  #270 opened 2 years ago by cottec
  4

• When in Steam Mode the setpoint offset should be added to the setpoint

  #274 opened 2 years ago by cottec
  2

• Compiling error when having Pid Only+Scale selected

  #268 opened 2 years ago by cottec
  0