Issues
- 11
Unresponsive every 3-4 months
#93 opened by neldonado - 5
Lost control on 2 of the 4 RatGDO units
#90 opened by skykep - 1
Door opening accessible without password
#94 opened by mr-entropy - 10
ratgdo keeps going offline
#91 opened by angrycatmeowmeow - 1
- 1
- 8
Can't configure a static IP address on ratgdo
#62 opened by pfurrie - 8
- 2
Request option to disable emulation
#83 opened by abuker - 0
Unable to OTA update with Home Assistant
#89 opened by MVerBerkmoes - 2
Wireless keypad causes Ratgdo/Home Assistant to go out of sync (Sec 1.0+ w/ purple learn button)
#85 opened by FrankJaco - 2
Add genie light & lock controls
#56 opened by PaulWieland - 7
intermittent door responses
#87 opened by scotmerrick - 4
Strange conflict with 880LM panel
#60 opened by dbavatar - 5
Suggestion: Door open and close could possibly be more accurate after door is stopped
#42 opened by p-jean - 0
How to change shipping info
#86 opened by JPADALLA - 0
- 4
- 0
Dry Contact Door State unknown after reboot
#81 opened by Goose66 - 0
where in code is var "controlProtoco"l defined?
#80 opened by mitchjs - 1
Problems after disconnect from wifi
#79 opened by haffi78 - 5
- 3
Motion state MQTT message is retained message
#74 opened by Goose66 - 0
Door open/close sensing w/397LM
#77 opened by windsurferwill - 6
unable to re-flash RATDGO
#76 opened by makebede77 - 9
over 500 Status changes in just a few hours: Door Cycling between various states
#73 opened by thomasshawn - 2
- 16
- 2
- 11
- 2
- 0
Security Plus Not Working
#70 opened by sebastiangoldstein - 1
Random issues with Sec+ 1.0
#65 opened by rairai82 - 3
Motion flag is never cleared
#63 opened by Goose66 - 3
- 1
- 10
- 2
web config fails to load if mqtt server is down.
#59 opened by ipha - 10
Any chance of support for non MyQ openers?
#54 opened by ATaylor5596 - 0
Security 1.0 - Random corruption?
#57 opened by jeeftor - 2
- 1
Firmware update links to wrong repo
#55 opened by danb35 - 2
- 3
- 2
- 1
getting erroneous light messages on a 8500 setup within the same second on/off
#46 opened by thplex48178 - 2
- 1
Unable to flash ratgdo_esp8266_hV25_sV2.56 on v2.5 hardware (MQTT) currently running v2.51
#40 opened by edasque - 2
Sec+ 1.0 ratgdov v2.56 door status not reported
#43 opened by sangdrax8 - 1