Video.js Record

Video.js plugin for recording audio/video/image files.

Installation
Dependencies
Usage
- Audio/video/image
- Audio-only
Examples
Options
Methods
Events
Media constraints
Get recorded data
- Save data
- Timestamps
- Upload data
Controlling the input and output devices
Responsive layout
Customizing controls
Other audio libraries
Localization
Webpack
Using with React
More features using other plugins
Development
Font
License
Donate

Installation

Use npm (npm install videojs-record) to install the plugin or download the library and dependencies elsewhere. If you want to try the examples, check these instructions below.

Since v2.0 this plugin is compatible with video.js 6.0 and videojs-wavesurfer.js 2.0 or newer. If you want to use this plugin with an older version, check the archived releases for a 1.7.x or older release.

Take a look at the changelog when upgrading from a previous version of videojs-record.

Dependencies

The plugin has the following mandatory dependencies:

Video.js - HTML5 media player that provides the user interface.
webrtc-adapter - Provides cross-browser support for getUserMedia and other browser APIs used in this plugin.

When recording audio and/or video you also need:

RecordRTC.js - Adds support for audio/video/GIF recording.

And when recording audio-only, the following dependencies are also required ( to visualize the audio waveform):

wavesurfer.js - Provides a navigable waveform for audio files. Comes with a microphone plugin used for realtime visualization of the microphone audio signal.
videojs-wavesurfer - Transforms Video.js into an audio-player.

Optional dependencies when using other audio libraries (note that most of these audio codecs are already available in most modern browsers):

libvorbis.js - Converts PCM audio data to compressed Ogg Vorbis audio, resulting a smaller audio files with similar quality.
lamejs - Converts PCM audio data to compressed MP3 audio.
opus-recorder - Converts the output of Web Audio API nodes as Opus and exports it into an Ogg container.
recorder.js - A plugin for recording the PCM output of Web Audio API nodes.

Usage

Start by including the video.js stylesheet and library:

<link href="video-js.min.css" rel="stylesheet">
<script src="video.min.js"></script>

If you're going to record audio and/or video you need to include RecordRTC as well:

<script src="RecordRTC.js"></script>

The videojs-record plugin automatically registers itself when the script is included on the page:

<script src="videojs.record.js"></script>

Add the extra stylesheet for the plugin that includes a custom font with additional icons:

<link href="videojs.record.css" rel="stylesheet">

Audio/video/image

When recording either audio/video, video-only, animated GIF or a single image, include a video element:

<video id="myVideo" class="video-js vjs-default-skin"></video>

Audio-only

When recording audio-only, also include the wavesurfer.js library and the videojs-wavesurfer and microphone plugins. Make sure to place this before the videojs.record.js script.

<script src="wavesurfer.min.js"></script>
<script src="wavesurfer.microphone.min.js"></script>
<script src="videojs.wavesurfer.js"></script>

And define an audio element:

<audio id="myAudio" class="video-js vjs-default-skin"></audio>

There is also support for additional audio libraries that allows you to record audio with alternative codecs (that otherwise might not be supported in the browser) like Ogg Vorbis, MP3 and Opus.

Examples

audio/video (demo / source)
video-only (demo / source)
audio-only example (demo / source)
image (demo / source)
animated GIF (demo / source)

To try out the examples locally, download the zipfile and unpack it, or checkout the repository using Git:

git clone https://github.com/collab-project/videojs-record.git

And install the dependencies using npm:

cd videojs-record
npm install

Build the library and assets once:

npm run build

And start the local webserver:

npm run start

And open http://localhost:8080/examples/audio-video.html in a browser.

Options

Configure the player using the video.js options, and enable the plugin by adding a record configuration to plugins. For example:

var player = videojs('myVideo', {
    // video.js options
    controls: true,
    loop: false,
    fluid: false,
    width: 320,
    height: 240,
    plugins: {
        // videojs-record plugin options
        record: {
            image: false,
            audio: false,
            video: true,
            maxLength: 5,
            debug: true
        }
    }
});

The available options for this plugin are:

Option	Type	Default	Description
`image`	boolean or object	`false`	Create single snapshot image.
`audio`	boolean or object	`false`	Include audio in the recorded clip.
`video`	boolean or object	`false`	Include video in the recorded clip.
`animation`	boolean or object	`false`	Animated GIF without audio.
`debug`	boolean	`false`	Enables console log messages during recording for debugging purposes.
`maxLength`	float	`10`	Maximum length of the recorded clip.
`timeSlice`	float	`0`	Accepts numbers in milliseconds; use this to force intervals-based blobs and receive timestamps during recording by listening for the `timestamp` event.
`autoMuteDevice`	boolean	`false`	Turns off the camera/mic devices (and light) when audio and/or video recording stops, and turns them on again when recording resumes.
`frameWidth`	float	`320`	Width of the recorded video frames. Use media constraints to change the camera resolution width.
`frameHeight`	float	`240`	Height of the recorded video frames. Use media constraints to change the camera height.
`videoMimeType`	string	`'video/webm'`	The mime type for the video recorder. Use `video/mp4` (Firefox) or `video/webm;codecs=H264` (Chrome 52 and newer) for MP4. A full list of supported mime-types in the Chrome browser is listed here.
`videoRecorderType`	string or function	`'auto'`	Video recorder type to use. This allows you to specify an alternative recorder class, e.g. `WhammyRecorder`. Defaults to `auto` which let's recordrtc specify the best available recorder type.
`audioEngine`	string	`'recordrtc'`	Audio recording library/plugin to use. Legal values are `recordrtc`, `libvorbis.js`, `lamejs`, `opus-recorder` and `recorder.js`.
`audioRecorderType`	string or function	`'auto'`	Audio recorder type to use. This allows you to specify an alternative recorder class, e.g. `StereoAudioRecorder`. Defaults to `auto` which let's recordrtc specify the best available recorder type. Currently this setting is only used with the `recordrtc` `audioEngine`.
`audioMimeType`	string	`'auto'`	The mime type for the audio recorder. Defaults to `auto` which will pick the best option available in the browser (e.g. either `audio/wav`, `audio/ogg` or `audio/webm`). A full list of supported mime-types in the Chrome browser is listed here.
`audioBufferSize`	float	`4096`	The size of the audio buffer (in sample-frames per second). Legal values: 0, 256, 512, 1024, 2048, 4096, 8192 and 16384.
`audioSampleRate`	float	`44100`	The audio sample rate (in sample-frames per second) at which the `AudioContext` handles audio. Legal values are in the range of 22050 to 96000.
`audioBitRate`	float	`128`	The audio bitrate in kbps (only used in the lamejs plugin).
`audioChannels`	float	`2`	Number of audio channels. Using a single channel results in a smaller filesize.
`audioWorkerURL`	string	`''`	URL for the audio worker, for example: `/opus-recorder/build/encoderWorker.min.js`. Currently only used for opus-recorder and lamejs plugins.
`animationFrameRate`	float	`200`	Frame rate for animated GIF (in frames per second).
`animationQuality`	float	`10`	Sets quality of color quantization (conversion of images to the maximum 256 colors allowed by the GIF specification). Lower values (minimum = 1) produce better colors, but slow processing significantly. The default produces good color mapping at reasonable speeds. Values greater than 20 do not yield significant improvements in speed.

Methods

Methods for this plugin documented below are available using the record method of the video.js player instance. For example:

player.record().destroy();

Method	Description
`isRecording`	Returns a boolean indicating whether recording is active or not.
`getRecordType`	Get recorder type as string. Either `image_only`, `animation`, `audio_only`, `video_only` or `audio_video`.
`saveAs`	Show save as dialog in browser so the user can store the recorded media locally.
`destroy`	Destroys the recorder instance and children (including the video.js player).
`reset`	Not as destructive as `destroy`: use this if you want to reset the player interface and recorder state.
`stopDevice`	Stop the recording and the active audio and/or video device(s).
`getDevice`	Start the audio and/or video device(s).
`getDuration`	Get the length of the recorded stream in seconds. Returns 0 if no recording is available (yet).
`getCurrentTime`	Get the current time of the recorded stream during playback. Returns 0 if no recording is available (yet).
`enumerateDevices`	Get async list of media input and output devices available on the system.
`setAudioOutput(deviceId)`	Change the audio output device using its deviceId.
`start`	Start recording.
`stop`	Stop recording.
`pause`	Pause recording.
`resume`	Resume recording.

Events

Plugin events that are available on the video.js player instance. For example:

player.on('startRecord', function() {
    console.log('started recording!');
});

Event	Description
`deviceReady`	The webcam and/or microphone is ready to use.
`deviceError`	User doesn't allow the browser to access the webcam and/or microphone. Check `player.deviceErrorCode` for the specific error code.
`startRecord`	User pressed the record or camera button to start recording.
`progressRecord`	Fires continuously during recording (until recording is stopped or paused).
`stopRecord`	User pressed the stop button to stop recording.
`timestamp`	Fires continuously during recording whenever a new timestamp is available. Only fires if the `timeSlice` option is set.
`finishRecord`	The recorded stream or image is available. Check the `player.recordedData` object for the recorded data.
`enumerateReady`	`enumerateDevices` returned the devices successfully. The list of devices is stored in the `player.record().devices` array.
`enumerateError`	An error occured after calling `enumerateDevices`. Check the `player.enumerateErrorCode` property for an description of the error.
`audioOutputReady`	Audio output was changed and is now active.

Media constraints

Media stream constraints allow you to specify the types of media to request, along with any requirements for each type.

The following example shows how to change the camera resolution to 1280 by 720 pixels:

var player = videojs('myVideo', {
    controls: true,
    loop: false,
    // dimensions of video.js player
    fluid: false,
    width: 1280,
    height: 720,
    plugins: {
        record: {
            maxLength: 5,
            debug: true,
            audio: false,
            video: {
                // video constraints: set resolution of camera
                mandatory: {
                    minWidth: 1280,
                    minHeight: 720,
                },
            },
            // dimensions of captured video frames
            frameWidth: 1280,
            frameHeight: 720
        }
    }
});

Get recorded data

Listen for the finishRecord event and obtain the recorded data from the player.recordedData object for further processing:

// user completed recording and stream is available
player.on('finishRecord', function() {
    // the recordedData object contains the stream data that
    // can be downloaded by the user, stored on server etc.
    console.log('finished recording: ', player.recordedData);
});

Save data

Use the saveAs method to show a 'Save as' browser dialog where the user can choose the storage location for the recorded data. It accepts a name object that contains a mapping between the media type and the filename. For example:

player.on('finishRecord', function() {
    // show save as dialog
    player.record().saveAs({'video': 'my-video-file-name.webm'});
});

Timestamps

It's also possible to get data during recording with specific time-intervals. This could be useful in scenarios where you're recording a long clip and planning to upload recorded blobs to a server periodically, where the clip is stiched it together.

Enable the event with the timeSlice option:

record: {
    audio: false,
    video: true,
    maxLength: 5,
    debug: true,
    // fire the timestamp event every 2 seconds
    timeSlice: 2000
}

And listen for the timestamp event. For example:

// monitor stream data during recording
player.on('timestamp', function() {
    // timestamps
    console.log('current timestamp: ', player.currentTimestamp);
    console.log('all timestamps: ', player.allTimestamps);

    // stream data
    console.log('array of blobs: ', player.recordedData);
    // or construct a single blob:
    // var blob = new Blob(blobs, {
    //     type: 'video/webm'
    // });
});

Upload data

The example below shows how to upload each recording:

player.on('finishRecord', function() {
    // the blob object contains the recorded data that
    // can be downloaded by the user, stored on server etc.
    console.log('finished recording:', player.recordedData);

    var data = player.recordedData;
    if (player.recordedData.video) {
        // for chrome (when recording audio+video)
        data = player.recordedData.video;
    }

    var serverUrl = '/upload';
    var formData = new FormData();
    formData.append('file', data, data.name);

    console.log('uploading recording:', data.name);

    fetch(serverUrl, {
        method: 'POST',
        body: formData
    }).then(
        success => console.log('recording upload complete.')
    ).catch(
        error => console.error('an upload error occurred!')
    );
});

Check the simple upload for the complete example.

The example below shows how to 'stream' upload recorded data segments to a server using the jQuery library and the timestamp event:

var segmentNumber = 0;

player.on('timestamp', function() {
    if (player.recordedData && player.recordedData.length > 0) {
        var binaryData = player.recordedData[player.recordedData.length - 1];

        segmentNumber++;

        var formData = new FormData();
        formData.append('SegmentNumber', segmentNumber);
        formData.append('Data', binaryData);

        $.ajax({
            url: '/api/Test',
            method: 'POST',
            data: formData,
            cache: false,
            processData: false,
            contentType: false,
            success: function (res) {
                console.log("segment: " + segmentNumber);
            }
        });
    }
});

Check the jquery.fileupload or Fine Uploader examples on how to upload the data to a server using these libraries.

Controlling the input and output devices

Use enumerateDevices to get a list of the available input and output devices on the user's system, e.g. FaceTime HD-camera, default (Built-in microphone) etc.

Check out the enumerateDevices example (demo / source).

After you aquired the device id (called deviceId in the example below) specify it in the player configuration using constraints:

record: {
    maxLength: 20,
    debug: true,
    audio: true,
    video: {
        // video constraints: use preset device
        optional: [{sourceId: deviceId}]
    },
}

If your device has multiple audio output devices, use setAudioOutput(deviceId) to change the active audio output device, and listen for the audioOutputReady event to be notified when the new output device is active.

player.on('audioOutputReady', function() {
    console.log('Changed audio output to deviceId:', deviceId);
});

// change audio output device
player.record().setAudioOutput(deviceId);

See the full change-audio-output example (demo or source).

If your device has multiple audio input devices and you want to display these devices and allow the user to choose one, check out the the full change-audio-input example (demo or source).

Responsive layout

The fluid option for video.js will resize the player according to the size of the window.

Configure the player; enable the video.js 'fluid' option:

fluid: true

Customizing controls

To disable and hide specific controls, use the video.js controlBar option:

controlBar: {
    // hide fullscreen and volume controls
    fullscreenToggle: false,
    volumePanel: false
},

Other audio libraries

RecordRTC is the default recording library but there is also support for other audio libraries. Check the plugins wiki page for more information.

Localization

This plugin supports multiple languages. Each language has it's own file (found in the src/lang directory) that contains the translated text.

Using a different language, for example Dutch (nl), is done by including the plugin's language file and the Video.js language file:

<script src="videojs-record/dist/lang/nl.js"></script>
<script src="video.js/dist/lang/nl.js"></script>

And setting the Video.js player's language option:

language: "nl"

Adding support for an additional language is done by adding a new file with a filename that consists of the countrycode and the .json extension, eg. fr.json. The build script compiles the JSON into a usable language file, eg. fr.js. Check the Video.js wiki for a list of supported countrycodes. Pull requests to add more languages to this plugin are always welcome! You can also help out using the Transifex online translation tool.

Using with React

The React wiki page wiki page shows how to get started with React and videojs-record using the create-react-app tool.

Alternatively, the react example shows how to integrate this plugin in a React component (demo or source).

Webpack

The webpack wiki page shows how to configure webpack for videojs-record.

More features using other plugins

The Video.js community created lots of plugins that can be used to enhance the player's functionality.

Development

Install dependencies using npm:

npm install

Build a minified version:

npm run build

Generated files are placed in the dist directory.

During development:

npm run start

This will watch the source directory and rebuild when any changes are detected. It will also serve the files on http://127.0.0.1:8080.

All commands for development are listed in the package.json file and are run using:

npm run <command>

Font

Check the the font readme for more information.

License

This work is licensed under the MIT License.

Donate

Please consider donating if you like this project. Bitcoin is accepted and can be sent to 3PmXCqUggtq7KUWPbpN8WhMnb1Mfb1jbq8.

rbjarnason/videojs-record