NOTE: FUTURE DEVELOPMENT WILL HAPPEN THROUGH GITLAB!

As of June, 6th 2018 this project moved to Gitlab that's why this repository is archived and thus read-only until it is entirely removed from Github. Repository removal is scheduled for September, 15th 2018.

Please report issues and request your merges through the new project home. All further discussion - even for existing issues - will take place there.

Thank you,

rc0r

afl-utils

afl-utils is a collection of utilities to assist fuzzing with american-fuzzy-lop (afl). afl-utils includes tools for:

automated crash sample collection, verification, reduction and analysis (afl-collect, afl-vcrash)
easy management of parallel (multi-core) fuzzing jobs (afl-multicore, afl-multikill)
corpus optimization (afl-minimize)
fuzzer stats supervision (afl-stats)
fuzzer queue synchronisation (afl-sync)
autonomous utility execution (afl-cron)

Various screenshots of the tools in action can be found at the end of this file.

For installation instructions see docs/INSTALL.md.

afl-collect

afl-collect basically copies all crash sample files from an afl synchronisation directory (used by multiple afl instances when run in parallel) into a single location providing easy access for further crash analysis. Beyond that afl-collect has some more advanced features like invalid crash sample removing (see afl-vcrash) as well as generating and executing gdb scripts that make use of Exploitable. The purpose of these scripts is to automate crash sample classification (see screenshot below) and reduction.
Version 1.01a introduced crash sample de-duplication using backtrace hashes calculated by exploitable. To use this feature invoke afl-collect with -e <gdb_script> switch for automatic gdb+exploitable script generation and execution. For each backtrace hash only a single crash sample file will be kept.
afl-collect is quite slow when operating on large sample sets and using gdb+exploitable script execution, so be patient!
When invoked with -d <database>, sample information will be stored in the database. This will only be done when the gdb-script execution step is selected (-e). If database is an existing database containing sample info, afl-collect will skip all samples that already have a database entry during sample processing. This will work also when -e is not requested. This makes subsequent afl-collect runs more efficient, since only unseen samples are processed (and added to the database).

Usage examples:

Simply collect all crashes from ./afl_sync_dir into a collection directory removing non-crashing samples:

$ afl-collect -r ./afl_sync_dir ./collection_dir -- /path/to/target --target-opts

Collect crashes, execute exploitable on them and remove uninteresting crashes. Info for all processed samples will be stored in an SQLite DB. The gdb script used to run exploitable on all samples will be saved in gdb_script. We're using eight threads here:

$ afl-collect -d crashes.db -e gdb_script -r -rr ./afl_sync_dir ./collection_dir \
        -j 8 -- /path/to/target --target-opts

During sample verification (enabled using -r) afl-collect uses a default time of 10 seconds to allow the target process to finish processing a single sample. This ensures that afl-collect continues to run even if you happen to encounter some DoS condition in the target. If you want to tweak this value use -r in conjunction with -rt <timeout> to specify the timeout in seconds.

afl-cron

The purpose of afl-cron is to run different afl-utils tasks periodically. Example use cases include grabbing afl-stats or syncing fuzzing queues using afl-sync repeatedly. afl-cron is not limited to run top-level tools from the afl-utils collection. For a much finer granularity you may specify an arbitrary function from any afl-utils module to be executed once the timer runs out.

Running afl-cron with the following configuration will execute afl-stats.main() every 60 minutes in quiet mode using the provided sample config:

{
    "interval": 60,
    "jobs": [
        {
            "name": "afl-stats",
            "description": "Job description here",
            "module": "afl_utils.afl_stats",
            "function": "main",
            "params": "--quiet -c config/afl-stats.conf.sample"
        }
    ]
}

You may have multiple job definitions in your configuration. Once the interval timer is up, all jobs are executed sequentially.

afl-minimize

Helps to create a minimized corpus from samples of a parallel fuzzing job. It basically works as follows:

Collect all queue samples from an afl synchronisation directory in collection_dir.
Run afl-cmin on the collected corpus, save minimized corpus in collection_dir.cmin.
Run afl-tmin on the remaining samples to reduce them in size. Save results in collection_dir.tmin if step two was omitted or collection_dir.cmin.tmin otherwise.
Perform a "dry-run" for each sample and move crashes/timeouts out of the corpus. This step will be useful prior to starting a new or resuming a parallel fuzzing job on a corpus containing intermittent crashes. Crashes will be moved to a .crashes directory, if one of steps 1, 2 or 3 were performed. If only "dry-run" is requested, crashing samples will be moved from the queue to the crashes dirs within an afl sync dir. For timeouts the behavior is similar: When operating on a collection directory timeouts will be moved to a .hangs directory. When operating on the original afl synchronisation directory timeouts will go into hangs dir within the corresponding afl fuzzer dir.

As already indicated, all these steps are optional, making the tool quite flexible. E.g. running only step four can be handy before resuming a parallel fuzzing session. In order to skip step one, simply provide a directory containing fuzzing samples. Then afl-minimize will not collect any samples, instead afl-cmin and/or afl-tmin are run on the samples in the provided directory.

When operating on corpora with many samples use --tmin with caution. Running thousands of files through afl-tmin can take very long. So make sure the results are as expected and worth the effort. You don't want to waste days of CPU time just to reduce your corpus size by a few bytes, don't you?!

Performing the "dry-run" step after running afl-cmin might seem pointless, but my experience showed that sometimes crashes remain in the minimized corpus. So this is just an additional step to get rid of them. But don't expect "dry-run" to always clear your corpus from crashes with a 100% success rate!

Brandon Perry described a common fuzzing workflow in his blog post. It incorporates corpus pruning and reseeding afl-fuzz with optimized corpora. The collection and minimization steps taken in afl-minimize automate the pruning process of the presented workflow. To feed the minimized, pruned corpus back into the different instances of afl-fuzz you may use the --reseed option that comes with afl-minimize.
This effectively moves the original queue directories of all fuzzing instances out of the way (to queue.YYYY-MM-DD-HH:MM:SS). Next, the optimized corpus is copied into the queue dirs of your fuzzing instances.
After reseeding, all fuzzing instances may be resumed on the same, optimized corpus. So with afl-utils the pruning/reseeding process is just a matter of afl-multicoreing, afl-multikilling and afl-minimizeing.

Usage examples:

Minimize the entire corpus of all fuzzers in ./afl_sync_dir using afl-cmin and afl-cmin utilizing eight threads:

$ afl-minimize -c new_corpus --cmin --cmin-mem-limit=500 --tmin --tmin-mem-limit=500 \
            -j 8 ./afl_sync_dir -- /path/to/target --target-opts

Minimize the entire corpus using afl-cmin and reseed the fuzzers:

$ afl-minimize -c new_corpus --cmin --cmin-mem-limit=500 --reseed ./afl_sync_dir \
            -- /path/to/target --target-opts

afl-multicore

afl-multicore starts several parallel fuzzing jobs in the background using nohup (Note: So afl's fancy interface is gone). Fuzzer outputs (stdout and stderr) will be redirected to /dev/null. Use --verbose to turn output redirection off. This is particularly useful when debugging afl-fuzz invocations. The auto-generated file nohup.out might also contain some useful info.
Another way to debug afl-fuzz invocations is test mode. Just start afl-multicore and provide the --test flag to perform a test run. afl-multicore will start a single fuzzing instance in interactive mode using a test output directory <out-dir>_test. The interactive setting in your config file will be ignored.
Note: After running a test you will have to clean up the test output directory <out-dir>_test yourself!
Note: For interactive test runs screen is not required!

If you want to check the fuzzers' progress see fuzzer_stats in the respective fuzzer directory in the synchronisation dir (sync_dir/SESSION###/fuzzer_stats)! Another way to monitor fuzzing progress is to use afl-stats. You may also want to check out afl-stats database dumping feature. An afl-multicore session can (and should!) easily be aborted with the help of afl-multikill (see below).

If you prefer to work with afl's UI instead of background processes and stat files, screen mode is for you. "Interactive" screen mode can be enabled using the interactive setting in the config file (see below). In order to use it, start afl-multicore from inside a screen session. A new screen window is created for every afl instance. Though screen mode is not supported by afl-multikill.
Attention: When using screen mode be sure to set necessary environment variables in your afl-multicore configuration! Alternatively run screen -X setenv <var_name> <var_value> from inside screen before running afl-multicore. Both ways the environment is inherited by all subsequently created screen windows.

Usage examples:

$ afl-multicore -c target-multicore.conf start 16
$ afl-multicore -c target-multicore.conf add 4
$ afl-multicore -c target-multicore.conf resume 20

In case you want to resume just a few fuzzers you may use selective resume. Let's say you've had 20 afl instances running, killed all but the first one (the master instance) and now you want to resume all slave instances without interrupting master:

$ afl-multicore -c target-multicore.conf resume number_of_jobs_to_resume,job_offset
$ afl-multicore -c target-multicore.conf resume 19,1

This afl-multicore invocation will resume 19 instances starting at offset 1. Of course other ranges are possible too. However, when using an offset greater than master_instances (description below) only slave instances will be resumed!

Target settings and afl options are configured in a JSON configuration file. The most simple configuration may look something like:

{
    "input": "./in",
    "output": "./out",
    "target": "~/bin/target",
    "cmdline": "--target-opt"
}

Of course a lot more settings can be configured, some of these settings are:

afl options: timeout, memory limit, dictionary, CPU affinity, ...
job options: session name, interactive mode
environment variables for interactive screen mode

For a complete list of options see afl-multicore.conf.sample. Their descriptions are documented in section Configuration Settings below.

To start four fuzzing instances simply do:

$ afl-multicore -c target.conf start 4

Now, if you want to add two more instances because afl-gotcpu states you've got some spare CPU cycles available, use the add command:

$ afl-multicore -c target.conf add 2

Interrupted fuzzing jobs can be resumed the same way using the resume command.
Note: It is possible to tell afl-multicore to resume more jobs for a specific target than were previously started. Obviously afl-multicore can resume just as many afl instances as it finds output directories for! Use the add command to start additional afl instances!

afl-fuzz can be run using its -f <file> argument to specify the location of the generated sample. When using multiple afl-fuzz instances a single file obviously can't do the trick, because multiple fuzzers running in parallel would need separate files to store their data. For that reason afl-multicore extends the provided filename with the instance number similar to the session naming scheme: cur_input would be extended into cur_input_000, cur_input_001 and so on. In order to use these files just use %% in the target command line specification within the config file. afl-multicore will then do all the magic and use the correct files for the different instances of afl-fuzz.

Example config:

{
    "target": "/your/app/here",
    "cmdline": "--some-target-opts --input-file %%",
      "#": "^- translates to:",
      "#": "--some-target-opts --input-file /path/to/cur_input_000",
      "#": "--some-target-opts --input-file /path/to/cur_input_001",
      "#": "...",
    "file": "/path/to/cur_input"
}

Real life fuzzing experience showed that starting or resuming many afl-fuzz instances at once can be problematic. Especially during initialization these fuzzers may heavily interfere with each other causing intermittent afl-fuzz aborts. In case you are facing such a scenario you might want to give the delayed startup feature (-s <delay> option) a try! Chose the startup delay with caution depending on your corpus size. For small corpora a few seconds should work well, for corpora containing tens or hundreds of thousands of files much greater delays (minutes, hours or even days) are needed to have an effect.
If you have no clue what to chose or you're simply lazy, try auto. This will estimate a delay based on the chosen afl timeout and the number of samples in the input dir (for initial start ups) or in the queue dirs of the individual fuzzers (for resumes).

$ afl-multicore -c target.conf -s 120 resume 64
$ afl-multicore -c target.conf -s auto resume 64

Configuration settings

As already noted there are only four settings that are required in every config file. These are afl-fuzz directory specifications input and output, the path to the target binary target and target command line arguments cmdline:

If you want to run afl-multicore on different afl-fuzz binaries you may specify the fuzzer explicitly:

"fuzzer": "afl-fuzz-fast"

Make sure the provided fuzzer binary is in your path! The default is to use afl-fuzz.

afl-fuzz directory specifications:

"input": "./in",
"output": "./out"

Target binary and command line settings:

"target": "/usr/bin/target",
"cmdline": "-a -b -c -d"

Location read by the fuzzed program. Valid options are:

a file name
@@ (see afl-fuzz manual)

"file": "@@"

Timeout in ms for each fuzzing run:

"timeout": "200+"

Memory limit in MB for target processes. To avoid hiccups make sure to provide the desired memory limit value as a string!

"mem_limit": "150"

Use afl QEMU mode?

"qemu": true

Use afl_margs to provide additional cmdline arguments for afl. These arguments will directly be passed to afl! This way you may provide new, hacked or experimental cmdline args to afl-fuzz.

"afl_margs": "-T banner"

Skip afl deterministic steps:

"dirty": true

Fuzz without instrumentation:

"dumb": true

Specify a fuzzing dictionary:

"dict": "dict/target.dict"

Provide a name for the fuzzing session. Master outputs will be written to output/SESSION000!

"session": "SESSION"

The optional master_instances configuration option controls how many master instances should be started:

master_instances = 1 or omitted: run in default single-master mode
master_instances <= 0: run in slave-only mode
master_instances > 1: run in experimental multi-master mode

"master_instances": 1

Interactive screen mode. Starts every afl instance in a separate screen window. Run afl-multicore from inside screen!

"interactive": true

Environment variables afl-multicore will set when using interactive screen mode.

"environment": [
    "AFL_PERSISTENT=1",
    "LD_PRELOAD=desock.so"
]

afl-multikill

Aborts all afl-fuzz instances belonging to an active non-interactive afl-multicore session. afl-multicore sessions that were started in screen mode can not be aborted!

Usage example:

$ afl-multikill -S target_session

afl-stats

Prints fuzzing statistics similar to afl-whatsup -s and optionally posts (tweets) them to Twitter. This is especially useful when fuzzing on multiple machines. Regularly ssh-ing into all of your boxes to check fuzzer_stats quickly becomes a PITA...
Additionally afl-stats may dump the current contents of fuzzer_stats into a database. So upon later inspection you have historical stats information in one place for analysis. For twitter setup instructions, please see docs/INSTALL.md! Screenshots of sample tweets can be found in the final section of this document.

Usage example:

$ afl-stats -c target-stats.conf -d stats.db -t

afl-sync

Using afl-sync you may distribute fuzzing corpora of multiple afl-fuzz instances across node boundaries. It allows to backup, restore or synchronise afl-fuzz instance directories to, from or with a remote destination. Under the hood afl-sync uses rsync with enabled compression and tries to avoid unnecessary data transfers. During a push operation afl-sync takes an afl-fuzz synchronisation directory and transfers all contained fuzzer directories to a remote location appending the .sync extension. When pulling afl-sync downloads all fuzzer directories from the remote location to the synchronisation dir. Fuzzer instances already located in the local sync dir that previously were used for pushing will not be downloaded! In order to download these fuzzer directories provide a clean sync dir. The synchronisation operation simply issues a pull followed by push command. Specific fuzzing jobs may be selected from a sync dir by providing their respective session name (-S session). See afl-multicore for more info about session naming.

Usage examples:

$ afl-sync push ./afl_sync_dir rc0r@remote.fuzzer_instance_repo.com:/repo/target/
$ afl-sync pull ./afl_sync_dir rc0r@remote.fuzzer_instance_repo.com:/repo/target/
$ afl-sync sync ./afl_sync_dir rc0r@remote.fuzzer_instance_repo.com:/repo/target/

afl-vcrash

afl-vcrash verifies that afl-fuzz crash samples really lead to crashes in the target binary and optionally removes these samples automatically.
Note: afl-vcrash functionality is incorporated into afl-collect. If afl-collect is invoked with switch -r, it runs afl-vcrash -qr to quietly remove invalid samples from the collected files.
To enable parallel crash sample verification provide -j followed by the desired number of threads afl-vcrash will utilize. Depending on the target process you're fuzzing, running multiple threads in parallel can significantly improve verification speeds.

Usage example:

$ afl-vcrash -r -j 8 ./dir_with_crashes -- /path/to/target --target-opt

rc0r/afl-utils

NOTE: FUTURE DEVELOPMENT WILL HAPPEN THROUGH GITLAB!

afl-utils

afl-collect

afl-cron

afl-minimize

afl-multicore

Configuration settings

afl-multikill

afl-stats

afl-sync

afl-vcrash

Screenshots

afl-collect

afl-sync

afl-multicore

afl-stats