rcarlyle/StepperSim

Issues

• Excel viewer is unable to open

  #42 opened 8 years ago by paboman
  2

• Back-emf estimator calculation

  #38 opened 8 years ago by rcarlyle
  0

• Feature: Add phase circle display

  #13 opened 8 years ago by rcarlyle
  1

• Feature: Trinamic TMC2100

  #34 opened 8 years ago by trilitheum
  2

• Need more instructions on how to determine motor specs

  #12 opened 8 years ago by rcarlyle
  1

• Inductance is treated as constant

  #27 opened 8 years ago by rcarlyle
  2

• Speeds between current-limited and voltage-limited range may not converge goal seek due to multiple current peaks

  #32 opened 9 years ago by rcarlyle
  0

• FETs do not turn off at zero-crossing currents

  #4 opened 9 years ago by rcarlyle
  1

• THB6128: Mixed decay "forced fast decay" mode has some incorrect edge cases

  #29 opened 9 years ago by rcarlyle
  0

• Microstep target transitions not displayed as step changes

  #7 opened 9 years ago by rcarlyle
  1

• Excel bug? Comments keep shrinking to invisibility

  #26 opened 9 years ago by rcarlyle
  0

• Very long file opening time in OpenOffice

  #25 opened 9 years ago by rcarlyle
  0

• FET RDSon is not handled correctly

  #21 opened 9 years ago by rcarlyle
  0

• Feature: Label driving/braking windows

  #16 opened 9 years ago by rcarlyle
  0

• Feature: Support speed ramping

  #15 opened 9 years ago by rcarlyle
  0

• Feature: Add ripple error chart

  #14 opened 9 years ago by rcarlyle
  0

• Model stops working at high speeds due to waveform distortion

  #11 opened 9 years ago by rcarlyle
  0

• Goal seek sucks - requires manual intervention

  #10 opened 9 years ago by rcarlyle
  0

• Goal seek sucks - too slow

  #9 opened 9 years ago by rcarlyle
  0

• Goal seek sucks - need more input pre-screening to avoid failure to converge

  #8 opened 9 years ago by rcarlyle
  0

• A4988 - Full step mode decay not correct

  #6 opened 9 years ago by rcarlyle
  0

• Freewheeling behavior not captured

  #5 opened 9 years ago by rcarlyle
  0

• Load angle input is awkward

  #3 opened 9 years ago by rcarlyle
  0