rdar-lab/OctoPrint-Domoticz

OctoPrint-Domoticz

This plugin is to control switches via Domoticz server.

Changelog

Screenshots

Setup

Install via the bundled Plugin Manager or manually using this URL:

https://github.com/jneilliii/OctoPrint-Domoticz/archive/master.zip

Configuration

Once installed go into settings and enter the details for your Domoticz server connection and switch index. Adjust additional settings as needed.

Settings Explained

• IP:PORT
  • The ip and port of Domoticz server.
• Index
  • Index number reprensenting the switch to control.
• Icon
  • Icon class name from the fontawesome library.
• Label
  • Title attribute on icon that shows on mouseover.
• Username
  • Username used to connect to web interface. If authentication is not configured on your Domoticz server leave this blank.
• Password
  • Password used to connect to web interface. If authentication is not configured on your Domoticz server leave this blank.
• Warn
  • The left checkbox will always warn when checked.
  • The right checkbox will only warn when printer is printing.
• GCODE
  • When checked this will enable the processing of M80 and M81 commands from gcode to power on/off plug. Syntax for gcode command is M80/M81 followed by hostname/ip and index. For example if your plug is 192.168.1.2:8080 and index of 1 your gcode command would be M80 192.168.1.2:8080 1
  • As of version 0.0.3 you can now use the custom gcode commands @DOMOTICZON and @DOMOTICZOFF. The difference here is that you only need to supply the index value with the command. For example @DOMOTICZOFF 1 will turn the switch with an Index of 1 off.
• postConnect
  • Automatically connect to printer after plug is powered on.
  • Will wait for number of seconds configured in Auto Connect Delay setting prior to attempting connection to printer.
• preDisconnect
  • Automatically disconnect printer prior to powering off the plug.
  • Will wait for number of seconds configured in Auto Disconnect Delay prior to powering off the plug.
• Cmd On
  • When checked will run system command configured in System Command On setting after a delay in seconds configured in System Command On Delay.
• Cmd Off
  • When checked will run system command configured in System Command Off setting after a delay in seconds configured in System Command Off Delay.

Get Help

If you experience issues with this plugin or need assistance please use the issue tracker by clicking issues above.

Additional Plugins

Check out my other plugins here

Sponsors

• Andreas Lindermayr
• @Mearman
• @TheTuxKeeper
• @tideline3d
• SimplyPrint
• Andrew Beeman
• Calanish
• Will O
• Lachlan Bell
• Johnny Bergdal
• Leigh Johnson
• Stephen Berry
• Guyot François
• César Romero
• Steve Dougherty
• Kyle Menigoz

Support My Efforts

I, jneilliii, programmed this plugin for fun and do my best effort to support those that have issues with it, please return the favor and leave me a tip or become a Patron if you find this plugin helpful and want me to continue future development.

No paypal.me? Send funds via PayPal to jneilliii@gmail.com