This script will allow you to change VLANs based on the vendor MAC address.
- Enter the vendor MAC of the devices. This is the first 6 of a MAC address and must be in Cisco format, HHHH.HH.
- Enter what VLAN you want all the devices to be in.
- Enter the IP of the switch the devices are connected to.
Vendor MAC for the devices. Must be HHHH.HH format: 0000.0c
VLAN would you like the devices to be in: 10
IP of the switch the devices connect to: 192.168.1.1
Once you log in, the script will run a search for devices containing the vendor MAC. If a device is already in the VLAN you specified, it will not be added to the list.
Username: cisco
Password:
Logging in now...
Searching for MAC address...
Found these interfaces:
['Gi1/0/3', 'Gi1/0/5', 'Gi1/0/9', 'Gi1/0/11']
If the interface is a trunk:
Gi1/0/3
Skipping, port is a trunk.
Else:
Gi1/0/5
Modifying, please wait...
Done!
Gi1/0/9
Modifying, please wait...
Done!
Gi1/0/11
Modifying, please wait...
Done!
After the interfaces are done, it will write memory and exit:
Writing to memory, please wait...
VLAN changes completed! Exiting program...
-
Python 3
-
Netmiko