Async DNS resolver for ReactPHP.
Development version: This branch contains the code for the upcoming v3 release. For the code of the current stable v1 release, check out the
1.xbranch.The upcoming v3 release will be the way forward for this package. However, we will still actively support v1 for those not yet on the latest version. See also installation instructions for more details.
The main point of the DNS component is to provide async DNS resolution. However, it is really a toolkit for working with DNS messages, and could easily be used to create a DNS server.
Table of contents
The most basic usage is to just create a resolver through the resolver factory. All you need to give it is a nameserver, then you can start resolving names, baby!
$config = React\Dns\Config\Config::loadSystemConfigBlocking();
if (!$config->nameservers) {
$config->nameservers[] = '8.8.8.8';
}
$factory = new React\Dns\Resolver\Factory();
$dns = $factory->create($config);
$dns->resolve('igor.io')->then(function ($ip) {
echo "Host: $ip\n";
});See also the first example.
The Config class can be used to load the system default config. This is an
operation that may access the filesystem and block. Ideally, this method should
thus be executed only once before the loop starts and not repeatedly while it is
running.
Note that this class may return an empty configuration if the system config
can not be loaded. As such, you'll likely want to apply a default nameserver
as above if none can be found.
Note that the factory loads the hosts file from the filesystem once when creating the resolver instance. Ideally, this method should thus be executed only once before the loop starts and not repeatedly while it is running.
But there's more.
You can cache results by configuring the resolver to use a CachedExecutor:
$config = React\Dns\Config\Config::loadSystemConfigBlocking();
if (!$config->nameservers) {
$config->nameservers[] = '8.8.8.8';
}
$factory = new React\Dns\Resolver\Factory();
$dns = $factory->createCached($config);
$dns->resolve('igor.io')->then(function ($ip) {
echo "Host: $ip\n";
});
...
$dns->resolve('igor.io')->then(function ($ip) {
echo "Host: $ip\n";
});If the first call returns before the second, only one query will be executed. The second result will be served from an in memory cache. This is particularly useful for long running scripts where the same hostnames have to be looked up multiple times.
See also the third example.
By default, the above will use an in memory cache.
You can also specify a custom cache implementing CacheInterface to handle the record cache instead:
$cache = new React\Cache\ArrayCache();
$factory = new React\Dns\Resolver\Factory();
$dns = $factory->createCached('8.8.8.8', null, $cache);See also the wiki for possible cache implementations.
The resolve(string $domain): PromiseInterface<string> method can be used to
resolve the given $domain name to a single IPv4 address (type A query).
$resolver->resolve('reactphp.org')->then(function ($ip) {
echo 'IP for reactphp.org is ' . $ip . PHP_EOL;
});This is one of the main methods in this package. It sends a DNS query for the given $domain name to your DNS server and returns a single IP address on success.
If the DNS server sends a DNS response message that contains more than
one IP address for this query, it will randomly pick one of the IP
addresses from the response. If you want the full list of IP addresses
or want to send a different type of query, you should use the
resolveAll() method instead.
If the DNS server sends a DNS response message that indicates an error
code, this method will reject with a RecordNotFoundException. Its
message and code can be used to check for the response code.
If the DNS communication fails and the server does not respond with a
valid response message, this message will reject with an Exception.
Pending DNS queries can be cancelled by cancelling its pending promise like so:
$promise = $resolver->resolve('reactphp.org');
$promise->cancel();The resolveAll(string $host, int $type): PromiseInterface<array> method can be used to
resolve all record values for the given $domain name and query $type.
$resolver->resolveAll('reactphp.org', Message::TYPE_A)->then(function ($ips) {
echo 'IPv4 addresses for reactphp.org ' . implode(', ', $ips) . PHP_EOL;
});
$resolver->resolveAll('reactphp.org', Message::TYPE_AAAA)->then(function ($ips) {
echo 'IPv6 addresses for reactphp.org ' . implode(', ', $ips) . PHP_EOL;
});This is one of the main methods in this package. It sends a DNS query for the given $domain name to your DNS server and returns a list with all record values on success.
If the DNS server sends a DNS response message that contains one or more
records for this query, it will return a list with all record values
from the response. You can use the Message::TYPE_* constants to control
which type of query will be sent. Note that this method always returns a
list of record values, but each record value type depends on the query
type. For example, it returns the IPv4 addresses for type A queries,
the IPv6 addresses for type AAAA queries, the hostname for type NS,
CNAME and PTR queries and structured data for other queries. See also
the Record documentation for more details.
If the DNS server sends a DNS response message that indicates an error
code, this method will reject with a RecordNotFoundException. Its
message and code can be used to check for the response code.
If the DNS communication fails and the server does not respond with a
valid response message, this message will reject with an Exception.
Pending DNS queries can be cancelled by cancelling its pending promise like so:
$promise = $resolver->resolveAll('reactphp.org', Message::TYPE_AAAA);
$promise->cancel();The UdpTransportExecutor can be used to
send DNS queries over a UDP transport.
This is the main class that sends a DNS query to your DNS server and is used
internally by the Resolver for the actual message transport.
For more advanced usages one can utilize this class directly.
The following example looks up the IPv6 address for igor.io.
$executor = new UdpTransportExecutor('8.8.8.8:53');
$executor->query(
new Query($name, Message::TYPE_AAAA, Message::CLASS_IN)
)->then(function (Message $message) {
foreach ($message->answers as $answer) {
echo 'IPv6: ' . $answer->data . PHP_EOL;
}
}, 'printf');See also the fourth example.
Note that this executor does not implement a timeout, so you will very likely
want to use this in combination with a TimeoutExecutor like this:
$executor = new TimeoutExecutor(
new UdpTransportExecutor($nameserver),
3.0
);Also note that this executor uses an unreliable UDP transport and that it
does not implement any retry logic, so you will likely want to use this in
combination with a RetryExecutor like this:
$executor = new RetryExecutor(
new TimeoutExecutor(
new UdpTransportExecutor($nameserver),
3.0
)
);Note that this executor is entirely async and as such allows you to execute
any number of queries concurrently. You should probably limit the number of
concurrent queries in your application or you're very likely going to face
rate limitations and bans on the resolver end. For many common applications,
you may want to avoid sending the same query multiple times when the first
one is still pending, so you will likely want to use this in combination with
a CoopExecutor like this:
$executor = new CoopExecutor(
new RetryExecutor(
new TimeoutExecutor(
new UdpTransportExecutor($nameserver),
3.0
)
)
);Internally, this class uses PHP's UDP sockets and does not take advantage of react/datagram purely for organizational reasons to avoid a cyclic dependency between the two packages. Higher-level components should take advantage of the Datagram component instead of reimplementing this socket logic from scratch.
The TcpTransportExecutor class can be used to
send DNS queries over a TCP/IP stream transport.
This is one of the main classes that send a DNS query to your DNS server.
For more advanced usages one can utilize this class directly.
The following example looks up the IPv6 address for reactphp.org.
$executor = new TcpTransportExecutor('8.8.8.8:53');
$executor->query(
new Query($name, Message::TYPE_AAAA, Message::CLASS_IN)
)->then(function (Message $message) {
foreach ($message->answers as $answer) {
echo 'IPv6: ' . $answer->data . PHP_EOL;
}
}, 'printf');See also example #92.
Note that this executor does not implement a timeout, so you will very likely
want to use this in combination with a TimeoutExecutor like this:
$executor = new TimeoutExecutor(
new TcpTransportExecutor($nameserver),
3.0
);Unlike the UdpTransportExecutor, this class uses a reliable TCP/IP
transport, so you do not necessarily have to implement any retry logic.
Note that this executor is entirely async and as such allows you to execute
queries concurrently. The first query will establish a TCP/IP socket
connection to the DNS server which will be kept open for a short period.
Additional queries will automatically reuse this existing socket connection
to the DNS server, will pipeline multiple requests over this single
connection and will keep an idle connection open for a short period. The
initial TCP/IP connection overhead may incur a slight delay if you only send
occasional queries – when sending a larger number of concurrent queries over
an existing connection, it becomes increasingly more efficient and avoids
creating many concurrent sockets like the UDP-based executor. You may still
want to limit the number of (concurrent) queries in your application or you
may be facing rate limitations and bans on the resolver end. For many common
applications, you may want to avoid sending the same query multiple times
when the first one is still pending, so you will likely want to use this in
combination with a CoopExecutor like this:
$executor = new CoopExecutor(
new TimeoutExecutor(
new TcpTransportExecutor($nameserver),
3.0
)
);Internally, this class uses PHP's TCP/IP sockets and does not take advantage of react/socket purely for organizational reasons to avoid a cyclic dependency between the two packages. Higher-level components should take advantage of the Socket component instead of reimplementing this socket logic from scratch.
The SelectiveTransportExecutor class can be used to
Send DNS queries over a UDP or TCP/IP stream transport.
This class will automatically choose the correct transport protocol to send a DNS query to your DNS server. It will always try to send it over the more efficient UDP transport first. If this query yields a size related issue (truncated messages), it will retry over a streaming TCP/IP transport.
For more advanced usages one can utilize this class directly.
The following example looks up the IPv6 address for reactphp.org.
$executor = new SelectiveTransportExecutor($udpExecutor, $tcpExecutor);
$executor->query(
new Query($name, Message::TYPE_AAAA, Message::CLASS_IN)
)->then(function (Message $message) {
foreach ($message->answers as $answer) {
echo 'IPv6: ' . $answer->data . PHP_EOL;
}
}, 'printf');Note that this executor only implements the logic to select the correct
transport for the given DNS query. Implementing the correct transport logic,
implementing timeouts and any retry logic is left up to the given executors,
see also UdpTransportExecutor and
TcpTransportExecutor for more details.
Note that this executor is entirely async and as such allows you to execute
any number of queries concurrently. You should probably limit the number of
concurrent queries in your application or you're very likely going to face
rate limitations and bans on the resolver end. For many common applications,
you may want to avoid sending the same query multiple times when the first
one is still pending, so you will likely want to use this in combination with
a CoopExecutor like this:
$executor = new CoopExecutor(
new SelectiveTransportExecutor(
$datagramExecutor,
$streamExecutor
)
);Note that the above UdpTransportExecutor class always performs an actual DNS query.
If you also want to take entries from your hosts file into account, you may
use this code:
$hosts = \React\Dns\Config\HostsFile::loadFromPathBlocking();
$executor = new UdpTransportExecutor('8.8.8.8:53');
$executor = new HostsFileExecutor($hosts, $executor);
$executor->query(
new Query('localhost', Message::TYPE_A, Message::CLASS_IN)
);The recommended way to install this library is through Composer. New to Composer?
Once released, this project will follow SemVer. At the moment, this will install the latest development version:
composer require react/dns:^3@devSee also the CHANGELOG for details about version upgrades.
This project aims to run on any platform and thus does not require any PHP extensions and supports running on PHP 7.1 through current PHP 8+. It's highly recommended to use the latest supported PHP version for this project.
To run the test suite, you first need to clone this repo and then install all dependencies through Composer:
composer installTo run the test suite, go to the project root and run:
vendor/bin/phpunitThe test suite also contains a number of functional integration tests that rely on a stable internet connection. If you do not want to run these, they can simply be skipped like this:
vendor/bin/phpunit --exclude-group internetMIT, see LICENSE file.