Docker-Warp-Socks

A lightweight Docker image, designed for easy connection to CloudFlare WARP, exposing socks5 proxy all together.

Multi-platform: linux/amd64, linux/arm64, linux/arm, and linux/s390x;

Ready to V2 features roadmap:

The new features will undergo pre-release testing at rws-cli.

+ 1. automatically enroll the WARP+ account plan
+ 2. eBFP featured wireguard implement
+ 3. more OS/platform support
+ 4. access to OpenAI Sora without effort
+ 5. 96.3% lighter(only 8MB) in alpine core run in more small devices!
+ 6. from 10s to 0.1s clone speed up from dockerhub!
+ 7. Enhance robustness to handle restartorreboot events!
+ 8. all in one caller written in Rust!!!
+ 9. Used to join in the SORA RED TEAM waitlist!
+ 10. Used to join in the Gemini 1.5 waitlist!
+ 11. Used to join in the SD 3.0 waitlist!
+ 12. Used to use the Claude 3 Opus!
Automatically install and config CloudFlare WARP Client in Docker
Enable the access of WARP network from Docker Container's SOCKS5 port
Extend accessibility and avoid potential restrictions by using proxy services
Avoid looping verification in the Midjourney Discord Channel
Prevent being banned by proxying API calls
Successfully pre-process the AI WaitList
Develop apps with warp embedded
~~Bypass the New Bing wait-list~~
...

Why to use

The official warp-cli only support amd64 machines, and its guide is prone to causing potential connection loss risks on remote machines. It is recommended to experiment with fresh installations within a docker container, or you have to reboot it via the panel.

With any existed running proxy service, it acts just like a plugin that helps unlock public content such as OpenAI Sora, OpenAI ChatGPT,OpenAI GPT-4, OpenAI GPT-4V, Claude, Claude 2, Claude 3 Opus, ~~Google Bard~~, Google Gemini, Google Gemini Pro Vision, Google Gemini Advanced, ~~Google PaLM2 API~~, Google Vertex API, Google Scholar, and Netflix. No necessary to have any knowledge of CloudFlare, Warp, WireGuard, and WGCF before using this image.

Usage

The v1 image is built on debian:bookworm aka debian:12, we recently migrate from v1 to v2, which based on a more lighter container alpine:3.19. The main line will transition within a month, with minimal impact on the user side. As a contingency plan, users can revert to monius/docker-warp-socks:v1 if needed.

Please follow the EXAMPLES 1.1 and 2.1 To Get Start !

💾 Prerequisites

# in case, you have no docker-ce installed;
curl -fsSL "https://get.docker.com" | sudo bash

# to avoid `sudo` calling
sudo usermod -aG docker ${USER}
# or check https://docs.docker.com/engine/security/rootless 
# if required a rootless install with `dockerd-rootless-setuptool.sh install`

# in case, using Centos/RedHatEL
sudo systemctl enable docker && sudo systemctl start docker

1. Docker CLI

1.1 🎉 Quick Start

Run the following commands in your terminal:

docker run --privileged --restart=always -itd \
    --name warp_socks \
    --cap-add NET_ADMIN \
    --cap-add SYS_MODULE \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --sysctl net.ipv4.conf.all.src_valid_mark=1 \
    -v /lib/modules:/lib/modules \
    -p 9091:9091 \
    monius/docker-warp-socks

The above command will create a background service that allows the entire container network to join the dual-stack cloudflare network pool without disconnecting from the host.

1.2 ⭐ WARP Plus Account(Advanced)

docker run --privileged --restart=always -itd \
    --name warp_socks_plus \
    -e WGCF_LICENSE_KEY=yourpluslicense \
    --cap-add NET_ADMIN \
    --cap-add SYS_MODULE \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --sysctl net.ipv4.conf.all.src_valid_mark=1 \
    -v /lib/modules:/lib/modules \
    -p 9091:9091 \
    monius/docker-warp-socks

Run, curl -x "socks5h://127.0.0.1:9091" -fsSL "https://www.cloudflare.com/cdn-cgi/trace"; See plus means WARP Plus License Key applied success.

1.3 🔒 Tunnel Encryption(Advanced)

Run the following commands in your terminal:

docker run --privileged --restart=always -itd \
    --name warp_socks_passwd \
    -e SOCK_USER=monius \
    -e SOCK_PWD=passwd \
    --cap-add NET_ADMIN \
    --cap-add SYS_MODULE \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --sysctl net.ipv4.conf.all.src_valid_mark=1 \
    -v /lib/modules:/lib/modules \
    -p 9091:9091 \
    monius/docker-warp-socks

The above command will add a little encryption to the existed socks connection, just a little~

Run, curl -U "monius:passwd" -x "socks5h://127.0.0.1:9091" -fsSL "https://www.cloudflare.com/cdn-cgi/trace" to go 🤗

1.4 🔧 Pre-Configuration Start (advanced)

To use your prepared config:

docker run --privileged --restart=always -itd \
    --name warp_socks \
    -e SOCK_USER=monius \
    -e SOCK_PWD=cool \
    --cap-add NET_ADMIN \
    --cap-add SYS_MODULE \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --sysctl net.ipv4.conf.all.src_valid_mark=1 \
    -p 127.0.0.1:9091:9091 \
    -v /lib/modules:/lib/modules \
    -v ~/wireguard/:/opt/wireguard/:ro \
    monius/docker-warp-socks

It will also recognize the prepared wgcf-profile.conf and danted.conf if they are located in ~/wireguard/. Use -v ~/wireguard/:/opt/wireguard/:ro to map the directory.

And, -p 127.0.0.1:9091:9091 will create a localhost(127.0.0.1) access-only 9091 port to secure the connection.

1.3 Test and Verify

To output the network test log:

# Host
curl -x "socks5h://127.0.0.1:9091" -fsSL "https://www.cloudflare.com/cdn-cgi/trace"
# See`warp=on` means success.

2. Docker Compose

docker-compose.yml could replace some args in a file to run a container.

💾 Download Standalone Docker-Compose V2 Binary

If you don't have Docker-Compose installed, following this:

sudo curl -fsSL <https://github.com/docker/compose/releases/download/v2.17.2/docker-compose->`uname -s`-`uname -m` > /usr/bin/docker-compose

sudo chmod +x /usr/bin/docker-compose

2.1 🎉 Compose up the container

#start
curl -fsSL https://bit.ly/docker-warp-socks-compose | docker-compose -f - up -d --wait && curl --proxy socks5h://127.0.0.1:9091 "https://www.cloudflare.com/cdn-cgi/trace"

#stop
curl -fsSL https://bit.ly/docker-warp-socks-compose | docker-compose -f - down

3. Docker Stack Deploy

Click the CLOSE button, Replace the $IP with the given one on the top side, then run: curl -x "socks5h://$IP:9091" -fsSL "https://www.cloudflare.com/cdn-cgi/trace"

3.1 Enable Swarm Mode

To use Docker Stack, first perform the Swarm Initialized by:

# create
docker swarm init

# leave
docker swarm leave --force

3.2 Service Creation

# create
curl -fsSL https://bit.ly/docker-warp-socks-compose | docker stack deploy -c - TEST

# remove
docker stack rm TEST

3.3 Check and Test

docker info
docker node ls
docker network ls
docker stack ps TEST
docker stack services TEST
docker service ls
docker service logs TEST_warp-socks
docker service inspect TEST_warp-socks

# in swarm mode, the ip addr is random

TID=`docker ps -aqf "name=^TEST_warp-socks"`
IF=`docker exec $TID sh -c "ip route show default" | awk '{print $5}'`
TIP=`docker exec $TID sh -c "ifconfig $IF" | awk '/inet /{print $2}' | cut -d' ' -f2`

curl -x "socks5h://127.0.0.1:9091" -fsSL "https://www.cloudflare.com/cdn-cgi/trace"

4. Official Implement

4.1 `Proxy` Mode for newbie

For those who has amd64 remote machine and don't need to use docker to secure network connection, I suggest to use the official warp-cli as following:

curl -fsSL https://pkg.cloudflareclient.com/pubkey.gpg \
    | sudo gpg --yes --dearmor --output /etc/apt/trusted.gpg.d/cloudflare-warp.gpg

echo "deb https://pkg.cloudflareclient.com $(lsb_release -cs) main" \
    | sudo tee /etc/apt/sources.list.d/cloudflare-warp.list  > /dev/null

sudo apt-get -qq update && sudo apt-get -qq install cloudflare-warp

echo y | warp-cli register
warp-cli set-mode proxy
warp-cli set-proxy-port 9091
warp-cli connect

# test
curl -x "socks5h://127.0.0.1:9091" -fsSL "https://www.cloudflare.com/cdn-cgi/trace"
# See`warp=on` means success.

4.2 `Default` Global Mode for old man

For those who are ooold enough for Linux network management, try it for a global proxy mode, keep in mind that you have already back up or have second way or third way to save your remote VM's network!!!

CF_WARP="https://pkg.cloudflareclient.com/pubkey.gpg"
_WARP="deb https://pkg.cloudflareclient.com $(lsb_release -cs) main"
echo "$_WARP" | sudo tee /etc/apt/sources.list.d/cloudflare-warp.list  > /dev/null
curl -fsSL "$CF_WARP" | sudo gpg --yes --dearmor --output /etc/apt/trusted.gpg.d/cloudflare-warp.gpg
sudo apt-get -qq update && sudo apt-get -qq install cloudflare-warp

GATEWAY=$(ip route show default | awk '/default/ {print $3}')
IFACE=$(ip route get 8.8.8.8 | sed -n 's/.*dev \([^\ ]*\).*/\1/p' | head -n 1)
_IPv4=$(ip addr show dev "$IFACE" | awk '/inet /{print $2}' | cut -d' ' -f2)
_IPv6=$(ip addr show dev "$IFACE" | awk '/inet6 /{print $2}' | cut -d' ' -f2)

echo y | warp-cli registration new

# Setting for VPC internal
warp-cli tunnel ip add "$_IPv4"
warp-cli tunnel ip add "$_IPv6"

# Setting for VPC external
echo "$SSH_CONNECTION" | sed 's/ .*//' | sed 's/[0-9]*$/0\/24/' | xargs warp-cli tunnel ip add

warp-cli connect
# Whole network in WARP proxy, `warp=on` means success. 
curl -fsSL "https://www.cloudflare.com/cdn-cgi/trace"

# Check `/var/log/cloudflare-warp/cfwarp_service_log.txt` for logs details

Plz be aware that the VMs still has possibility to be lost due to the IP can still be changed after reboot!!!

5. Debug Information

Debug commands for quick troubleshooting

docker rm -f $(docker ps -a -q) && docker rmi -f $(docker images -a -q)

docker run --privileged --restart=always -itd \
    --name warp_debug \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --sysctl net.ipv4.conf.all.src_valid_mark=1 \
    --cap-add NET_ADMIN --cap-add SYS_MODULE \
    -p 9091:9091 \
    -v /lib/modules:/lib/modules \
    monius/docker-warp-socks:meta

docker exec -it warp_debug /bin/bash

IFACE=$(ip route show default | grep default | awk '{print $5}')
IPv4=$(ifconfig "$IFACE" | awk '/inet /{print $2}' | cut -d' ' -f2)
IPv6=$(ifconfig "$IFACE" | awk '/inet6 /{print $2}' | cut -d' ' -f2)
TAR="https://api.github.com/repos/Mon-ius/Docker-Warp-Socks/releases/latest"
ARCH=$(dpkg --print-architecture)
URL=$(curl -fsSL ${TAR} | grep 'browser_download_url' | cut -d'"' -f4 | grep linux | grep "${ARCH}")
curl -LSs "${URL}" -o ./wgcf && chmod +x ./wgcf && mv ./wgcf /usr/bin
wgcf register --accept-tos && wgcf generate && mv wgcf-profile.conf /etc/wireguard/warp.conf
sed -i "/\[Interface\]/a PostDown = ip -6 rule delete from ${IPv6}  lookup main" /etc/wireguard/warp.conf
sed -i "/\[Interface\]/a PostUp = ip -6 rule add from ${IPv6} lookup main" /etc/wireguard/warp.conf
sed -i "/\[Interface\]/a PostDown = ip -4 rule delete from ${IPv4} lookup main" /etc/wireguard/warp.conf
sed -i "/\[Interface\]/a PostUp = ip -4 rule add from ${IPv4} lookup main" /etc/wireguard/warp.conf

wg-quick up warp

curl "https://www.cloudflare.com/cdn-cgi/trace"
curl --interface eth0 "https://www.cloudflare.com/cdn-cgi/trace"
curl --interface warp "https://www.cloudflare.com/cdn-cgi/trace"

Known issues

CentOS/RedHat/Rocky Linux as Host, see https://github.com/uzairali001/docker-wireguard-rhel

Source

Docker-Warp-Socks

Credits

Notice of Non-Affiliation and Disclaimer

We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with Cloudflare, or any of its subsidiaries or its affiliates. The official Cloudflare website can be found at https://www.cloudflare.com.

reason211/Docker-Warp-Socks

Docker-Warp-Socks

Ready to V2 features roadmap:

Why to use

Usage

💾 Prerequisites

1. Docker CLI

1.1 🎉 Quick Start

1.2 ⭐ WARP Plus Account(Advanced)

1.3 🔒 Tunnel Encryption(Advanced)

1.4 🔧 Pre-Configuration Start (advanced)

1.3 Test and Verify

2. Docker Compose

💾 Download Standalone Docker-Compose V2 Binary

2.1 🎉 Compose up the container

3. Docker Stack Deploy

3.1 Enable Swarm Mode

3.2 Service Creation

3.3 Check and Test

4. Official Implement

4.1 Proxy Mode for newbie

4.2 Default Global Mode for old man

5. Debug Information

Known issues

Source

Credits

Notice of Non-Affiliation and Disclaimer

4.1 `Proxy` Mode for newbie

4.2 `Default` Global Mode for old man