/airbrake

The official Airbrake library for Ruby on Rails. Links to other Airbrake libraries are in the ReadMe.

Primary LanguageRubyMIT LicenseMIT

Airbrake

This is the notifier gem for integrating apps with Airbrake.

When an uncaught exception occurs, Airbrake will POST the relevant data to the Airbrake server specified in your environment.

Help

For help with using Airbrake and this notifier visit our support site.

For discussion of Airbrake development check out the mailing list.

For SSL verification see the Resources.

Rails Installation

Remove hoptoad_notifier

in your ApplicationController, REMOVE this line:

include HoptoadNotifiable

In your config/environment* files, remove all references to HoptoadNotifier

Remove the vendor/plugins/hoptoad_notifier directory.

Remove hoptoad_notifier plugin

Remove the vendor/plugins/hoptoad_notifier directory before installing the gem, or run:

script/plugin remove hoptoad_notifier

Rails 3.x

Add the airbrake gem to your Gemfile. In Gemfile:

gem "airbrake"

Then from your project's RAILS_ROOT, and in your development environment, run:

bundle install
rails generate airbrake --api-key your_key_here

That's it!

The generator creates a file under config/initializers/airbrake.rb configuring Airbrake with your API key. This file should be checked into your version control system so that it is deployed to your staging and production environments.

Rails 2.x

Add the airbrake gem to your app. In config/environment.rb:

config.gem 'airbrake'

or if you are using bundler:

gem 'airbrake', :require => 'airbrake/rails'

Then from your project's RAILS_ROOT, and in your development environment, run:

rake gems:install
rake gems:unpack GEM=airbrake
script/generate airbrake --api-key your_key_here

As always, if you choose not to vendor the airbrake gem, make sure every server you deploy to has the gem installed or your application won't start.

The generator creates a file under config/initializers/airbrake.rb configuring Airbrake with your API key. This file should be checked into your version control system so that it is deployed to your staging and production environments.

Upgrading From Earlier Versions of Airbrake

If you're currently using the plugin version (if you have a vendor/plugins/hoptoad_notifier directory, you are), you'll need to perform a few extra steps when upgrading to the gem version.

Add the airbrake gem to your app. In config/environment.rb:

config.gem 'airbrake'

Remove the plugin:

rm -rf vendor/plugins/hoptoad_notifier

Make sure the following line DOES NOT appear in your ApplicationController file:

include HoptoadNotifier::Catcher

If it does, remove it. The new catcher is automatically included by the gem version of Airbrake.

Before running the airbrake generator, you need to find your project's API key. Log in to your account at airbrake.io, and click on the "Projects" button. Then, find your project in the list, and click on its name. In the left-hand column, you'll see an "Edit this project" button. Click on that to get your project's API key. If you accidentally use your personal API auth_token, you will get API key not found errors, and exceptions will not be stored by the Airbrake service.

Then from your project's RAILS_ROOT, run:

rake gems:install
script/generate airbrake --api-key your_key_here

Once installed, you should vendor the airbrake gem.

rake gems:unpack GEM=airbrake

As always, if you choose not to vendor the airbrake gem, make sure every server you deploy to has the gem installed or your application won't start.

Upgrading from Earlier Versions of the Hoptoad Gem (with config.gem)

If you're currently using the gem version of the hoptoad_notifier and have a version of Rails that uses config.gem (in the 2.x series), there is a step or two that you need to do to upgrade. First, you need to remove the old version of the gem from vendor/gems:

rm -rf vendor/gems/hoptoad_notifier-X.X.X

Then you must remove the hoptoad_notifier_tasks.rake file from lib:

rm lib/tasks/hoptoad_notifier_tasks.rake

You can then continue to install normally. If you don't remove the rake file, you will be unable to unpack this gem (Rails will think it's part of the framework).

You can test that Airbrake is working in your production environment by using this rake task (from RAILS_ROOT):

rake airbrake:test

If everything is configured properly, that task will send a notice to Airbrake which will be visible immediately.

Non-rails apps using Bundler

There is an undocumented dependency in activesupport where the i18n gem is required only if the core classes extensions are used (active_support/core_ext). This can lead to a confusing LoadError exception when using Airbrake. Until this is fixed in activesupport the workaround is to add i18n to the Gemfile for your Sinatra/Rack/pure ruby application:

gem 'i18n'
gem 'airbrake'

Rack

In order to use airbrake in a non-Rails rack app, just load airbrake, configure your API key, and use the Airbrake::Rack middleware:

require 'rack'
require 'airbrake'

Airbrake.configure do |config|
  config.api_key = 'my_api_key'
end

app = Rack::Builder.app do
  use Airbrake::Rack
  run lambda { |env| raise "Rack down" }
end

Sinatra

Using airbrake in a Sinatra app is just like a Rack app:

require 'sinatra'
require 'airbrake'

Airbrake.configure do |config|
  config.api_key = 'my api key'
end

use Airbrake::Rack

get '/' do
  raise "Sinatra has left the building"
end

Usage

For the most part, Airbrake works for itself. Once you've included the notifier in your ApplicationController (which is now done automatically by the gem), all errors will be rescued by the #rescue_action_in_public provided by the gem.

If you want to log arbitrary things which you've rescued yourself from a controller, you can do something like this:

...
rescue => ex
  notify_airbrake(ex)
  flash[:failure] = 'Encryptions could not be rerouted, try again.'
end
...

The #notify_airbrake call will send the notice over to Airbrake for later analysis. While in your controllers you use the notify_airbrake method, anywhere else in your code, use Airbrake.notify.

To perform custom error processing after Airbrake has been notified, define the instance method #rescue_action_in_public_without_airbrake(exception) in your controller.

Informing the User

The airbrake gem is capable of telling the user information about the error that just happened via the user_information option. They can give this error number in bug reports, for example. By default, if your 500.html contains the text

<!-- AIRBRAKE ERROR -->

then that comment will be replaced with the text "Airbrake Error [errnum]". You can modify the text of the informer by setting config.user_information. Airbrake will replace "{{ error_id }}" with the ID of the error that is returned from Airbrake.

Airbrake.configure do |config| ... config.user_information = "

Tell the devs that it was {{ error_id }}'s fault.

" end

You can also turn the middleware that handles this completely off by setting config.user_information to false.

Tracking deployments in Airbrake

Paying Airbrake plans support the ability to track deployments of your application in Airbrake. By notifying Airbrake of your application deployments, all errors are resolved when a deploy occurs, so that you'll be notified again about any errors that reoccur after a deployment.

Additionally, it's possible to review the errors in Airbrake that occurred before and after a deploy.

When Airbrake is installed as a gem, you need to add

require 'airbrake/capistrano'

to your deploy.rb

If you don't use Capistrano, then you can use the following rake task from your deployment process to notify Airbrake:

rake airbrake:deploy TO=#{rails_env} REVISION=#{current_revision} REPO=#{repository} USER=#{local_user}

Going beyond exceptions

You can also pass a hash to Airbrake.notify method and store whatever you want, not just an exception. And you can also use it anywhere, not just in controllers:

begin
  params = {
    # params that you pass to a method that can throw an exception
  }
  my_unpredicable_method(params)
rescue => e
  Airbrake.notify(
    :error_class   => "Special Error",
    :error_message => "Special Error: #{e.message}",
    :parameters    => params
  )
end

While in your controllers you use the notify_airbrake method, anywhere else in your code, use Airbrake.notify. Airbrake will get all the information about the error itself. As for a hash, these are the keys you should pass:

  • :error_class - Use this to group similar errors together. When Airbrake catches an exception it sends the class name of that exception object.
  • :error_message - This is the title of the error you see in the errors list. For exceptions it is "#{exception.class.name}: #{exception.message}"
  • :parameters - While there are several ways to send additional data to Airbrake, passing a Hash as :parameters as in the example above is the most common use case. When Airbrake catches an exception in a controller, the actual HTTP client request parameters are sent using this key.

Airbrake merges the hash you pass with these default options:

{
  :api_key       => Airbrake.api_key,
  :error_message => 'Notification',
  :backtrace     => caller,
  :parameters    => {},
  :session       => {}
}

You can override any of those parameters.

Sending shell environment variables when "Going beyond exceptions"

One common request we see is to send shell environment variables along with manual exception notification. We recommend sending them along with CGI data or Rack environment (:cgi_data or :rack_env keys, respectively.)

See Airbrake::Notice#initialize in lib/airbrake/notice.rb for more details.

Filtering

You can specify a whitelist of errors that Airbrake will not report on. Use this feature when you are so apathetic to certain errors that you don't want them even logged.

This filter will only be applied to automatic notifications, not manual notifications (when #notify is called directly).

Airbrake ignores the following exceptions by default:

AbstractController::ActionNotFound
ActiveRecord::RecordNotFound
ActionController::RoutingError
ActionController::InvalidAuthenticityToken
ActionController::UnknownAction
CGI::Session::CookieStore::TamperedWithCookie

To ignore errors in addition to those, specify their names in your Airbrake configuration block.

Airbrake.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore       << "ActiveRecord::IgnoreThisError"
end

To ignore only certain errors (and override the defaults), use the #ignore_only attribute.

Airbrake.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore_only  = ["ActiveRecord::IgnoreThisError"] # or [] to ignore no exceptions.
end

To ignore certain user agents, add in the #ignore_user_agent attribute as a string or regexp:

Airbrake.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore_user_agent  << /Ignored/
  config.ignore_user_agent << 'IgnoredUserAgent'
end

To ignore exceptions based on other conditions, use #ignore_by_filter:

Airbrake.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.ignore_by_filter do |exception_data|
    true if exception_data[:error_class] == "RuntimeError"
  end
end

To replace sensitive information sent to the Airbrake service with [FILTERED] use #params_filters:

Airbrake.configure do |config|
  config.api_key      = '1234567890abcdef'
  config.params_filters << "credit_card_number"
end

Note that, when rescuing exceptions within an ActionController method, airbrake will reuse filters specified by #filter_parameter_logging.

Testing

When you run your tests, you might notice that the Airbrake service is recording notices generated using #notify when you don't expect it to. You can use code like this in your test_helper.rb or spec_helper.rb files to redefine that method so those errors are not reported while running tests.

module Airbrake
  def self.notify(exception, opts = {})
    # do nothing.
  end
end

Proxy Support

The notifier supports using a proxy, if your server is not able to directly reach the Airbrake servers. To configure the proxy settings, added the following information to your Airbrake configuration block.

Airbrake.configure do |config|
  config.proxy_host = proxy.host.com
  config.proxy_port = 4038
  config.proxy_user = foo # optional
  config.proxy_pass = bar # optional

Supported Rails versions

See SUPPORTED_RAILS_VERSIONS for a list of official supported versions of Rails.

Please open up a support ticket ( http://help.airbrake.io ) if you're using a version of Rails that is listed above and the notifier is not working properly.

Javascript Notifer

To automatically include the Javascript node on every page, use this helper method from your layouts:

<%= airbrake_javascript_notifier %>

It's important to insert this very high in the markup, above all other javascript. Example:

<!DOCTYPE html>
<html>
  <head>
    <meta charset="utf8">
    <%= airbrake_javascript_notifier %>
    <!-- more javascript -->
  </head>
  <body>
    ...
  </body>
</html>

This helper will automatically use the API key, host, and port specified in the configuration.

To test the Javascript notifier in development environment, overwrite (temporarily) the development_environments option:

Airbrake.configure do |config|
  # ...
  config.development_environments = []
end

Development

See TESTING.md for instructions on how to run the tests.

Credits

thoughtbot

Airbrake is maintained and funded by thoughtbot, inc

Thank you to all the contributors!

The names and logos for thoughtbot are trademarks of thoughtbot, inc.

License

Airbrake is Copyright © 2008-2011 thoughtbot. It is free software, and may be redistributed under the terms specified in the MIT-LICENSE file.