reimerp

reimerp's Stars

• eprigorodov/mkosxinstallusb

  Linux shell script that creates USB flash drive booting OS X installer

  Language:Shell4610

• libimobiledevice/idevicerestore

  Restore/upgrade firmware of iOS devices

  Language:C1.4k399

• DanMcInerney/wifijammer

  Continuously jam all wifi clients/routers

  Language:Python4k788

• cifertech/nRFBox

  All-in-One Gadget for Dominating BLE and 2.4GHz Networks

  Language:C++51160

• wagiminator/CH552-USB-NRF

  USB controlled nRF24L01+ 2.4GHz Transceiver

  Language:C301

• dcwbrown/dwire-debug

  Simple stand-alone debugger for AVR DebugWIRE chips connected directly to an FT232R/CH340/DigiSpark/LittleWire on Linux or Windows.

  Language:C19233

• Lexy1972/Reverse-Engineer-a-Quntis-Monitor-LED-Bar-Controller

  Language:C++5

• IanWraith/24DownConvert

  A down converter design & software to allow an SDR to monitor the 2.4 GHz ISM band.

  Language:C12017

• misko/XN297_state_emulator

  Emulate the states of an XN297 from SPI trace of logic analyzer

  Language:Python1

• foldedtoad/xn297_cal

  XN297 (nRF24L01 clone) decoder for RF_CAL field

  Language:Python1

• silver13/CG023

  Dual mode firmware for CG023(STM32)

  Language:C3523

• pascallanger/DIY-Multiprotocol-TX-Module

  Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

  Language:C++1.7k443

• cyphunk/JTAGenum

  Given an Arduino compatible microcontroller or Raspberry PI (experimental), JTAGenum scans pins[] for basic JTAG functionality and can be used to enumerate the Instruction Register for undocumented instructions. Props to JTAG scanner and Arduinull which came before JTAGenum and forwhich much of the code and logic is based on. Feel free to branch and modify religiously (readme, credits, whatever)

  Language:C++729104

• Freetz-NG/freetz-ng

  Freetz-NG firmware modification for ​AVM devices like FRITZ!Box

  Language:Shell383106

• pfichtner/pfichtner-freetz

  Docker image for building Freetz images

  Language:Shell204

• MartinD-CZ/STM32F1-open-source-multimeter

  An open source multimeter, with dual ranges for V/I, RMS measurement, continuity, component test and more!

  Language:C35385

• rogerclarkmelbourne/STM32duino-bootloader

  Bootloader for STM32F103 boards, for use with the Arduino_STM32 repo and the Arduino IDE

  Language:C991499

• influxdata/telegraf

  Agent for collecting, processing, aggregating, and writing metrics, logs, and other arbitrary data.

  Language:Go15k5.6k

• arendst/Tasmota

  Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

  Language:C22.5k4.8k

• klattimer/LGWebOSRemote

  Command line webOS remote for LGTVs

  Language:Python545104