repetier/Repetier-Firmware

Issues

• Issue with missed steps, incorrect positioning after collision

  #1097 opened 8 months ago by fox88x
  2

• Evenly spread multisteps

  #1096 opened 9 months ago by Switchleg1
  0

• Issue on Spiderking 407 motherboard, couldn't get any axis to move

  #1095 opened a year ago by Maddy5075
  2

• Under extrusion and Stringing

  #1094 opened a year ago by Jimmyjohhny
  1

• 1.0.5 dev incorrect processed PID calibration g-code M303

  #1093 opened a year ago by Klutae
  2

• x, y, z axis only move in one direction

  #1092 opened 2 years ago by abaker3003
  4

• Issue Compiling for Melzi V2 (Wanhao Duplicator i3) Repetier V1.0.4

  #1091 opened 2 years ago by MedievalApple
  2

• Crush while connecting my FlsunQ5 printer in a Surface PRO 7

  #1090 opened 2 years ago by SquintPlug7
  3

• Better long filenames support

  #1087 opened 2 years ago by arekm
  3

• homing regression between 1.0.4 and current development branch

  #1085 opened 3 years ago by arekm
  4

• Typo maybe.....

  #1083 opened 3 years ago by johnnysmithy852456
  2

• Printer reset detected when connecting with Octoprint

  #1082 opened 3 years ago by GIJ0E
  13

• Caught a bug: incorrect processing G2 and G3: arc processing error with commands G2 and G3

  #1081 opened 3 years ago by Goodfeat
  1

• dev2, delta printer: Running auto-level before print fails if auto-leveled before

  #1080 opened 3 years ago by gkaindl
  1

• dev2: Homing causes motion on E axis (extruder)

  #1079 opened 3 years ago by kyrreaa
  3

• Hardware endstop don't work

  #1075 opened 4 years ago by nukem
  5

• Software endstop don't trigger on retest

  #1073 opened 4 years ago by nukem
  6

• Display controller hangs after USB is disconnected.

  #1070 opened 4 years ago by nukem
  19

• Beeper doesn't stop beeping in dev2

  #1071 opened 4 years ago by nukem
  13

• ZHOME_PRE_RAISE value

  #1068 opened 4 years ago by nukem
  1

• x_axis move one dirction why ? used repetier 1.04

  #993 opened 4 years ago by qusai210
  18

• why my lcd is not working when connect in power supply v12 20A

  #1024 opened 4 years ago by qusai210
  1

• Dev2: add M218 function

  #992 opened 4 years ago by GenaUser
  3

• Just sharing G30 and G32 mods

  #1016 opened 4 years ago by JoeScotty
  7

• dev2: ZProbe position problem when having dual extruder setup

  #991 opened 4 years ago by JoeScotty
  10

• extruder does not work repetier v 1.0.4

  #988 opened 4 years ago by qusai210
  7

• V2- STEPPER_MIRROR2 function and other

  #971 opened 4 years ago by GenaUser
  0

• dev2: Offset handling issue

  #990 opened 4 years ago by JoeScotty
  5

• dev2: stepper inactivity issue

  #989 opened 4 years ago by JoeScotty
  2

• dev2: Homing not correct if light barrier is alrady covered

  #984 opened 4 years ago by JoeScotty
  2

• DEV2 can't change pidI from LCD

  #983 opened 4 years ago by Plebejer258
  1

• [feature request] configuring STOP button to lift the hot end and turn off the cooling fan

  #963 opened 4 years ago by ahmedsohair
  2

• Dev2: Rumba32 MKS board compatibility

  #957 opened 4 years ago by GenaUser
  8

• one axis is slower than the others in delta printer

  #916 opened 5 years ago by mj996
  104

• Xyz serial number... For those already switched over

  #933 opened 4 years ago by jack30977
  2

• Homing all axes does not execute Z-homing

  #938 opened 4 years ago by walterbux
  5

• FEATURE REQUEST : allow to get status of command instead of set default value

  #934 opened 4 years ago by luc-github
  8

• Dev2: Serial port USB issue

  #926 opened 5 years ago by JeppeIbsen
  3

• M3/M4/M5 D9 config Problem

  #925 opened 5 years ago by tsvikabp
  2

• Help Please

  #924 opened 5 years ago by tsvikabp
  2

• Small issue (I need some help)

  #923 opened 5 years ago by jack30977
  0

• Support for USB Host

  #918 opened 5 years ago by Yatin-Khurana
  2

• dev2 - core-xyz - Homing causing extruder motion?

  #914 opened 5 years ago by kyrreaa
  9

• dev2 - Keeps resetting eeprom settings

  #915 opened 5 years ago by kyrreaa
  11

• dev2 - Z-probe sometimes ignored - crash into bed

  #910 opened 5 years ago by kyrreaa
  35

• dev2 - Max extruder feedrate appears to be ignored

  #908 opened 5 years ago by kyrreaa
  5

• dev2 - Endstop and probe behaviour not well documented

  #907 opened 5 years ago by kyrreaa
  2

• dev2 / v2 - EEPROM seems to be reset on every printer reset?

  #906 opened 5 years ago by kyrreaa
  3

• dev2 - Deactivate does not properly restore positioning

  #909 opened 5 years ago by kyrreaa
  1

• firmware for arduino mega 2560 does not compile ( v 2.0)

  #905 opened 5 years ago by Goodfeat
  4