Shift register display
These are the Kicad design files for the shift register display described in my Hackaday project
Versioning
Working release January 2020
Notes
srdisplay.ino is an Arduino sketch to test the display.
At assembly time you should choose between sourcing current to the LEDs by installing the Source/Sink soldered jumper. If sinking is chosen, the LEDs should be installed in reverse polarity to the silkscreen legend.
If you do not wish to drive /OE for PWM brightness control from the controller, you should jumper it to ground.
Authors
- Ken Yap
License
See the LICENSE file for license rights and limitations (MIT).