rfminelli/check_pon_fiberhome

A Nagios plugin to check in OLT Fiberhome if ONUs status is UP

Nagios check PON status in OLT Fiberhome

This plugin can test all Fiberhome pon slot with 8 or 16 PONs if PON link status is UP or DOWN

The plugin check if in all PONs of a specific SLOT has customers, if a PON port have one or more customers and PON status is DOWN one alarm is generated.

---

Nagios check PON in OLT Fiberhome

Written by Jorge Luiz Taioque
This plugin check status of a PON Slot connected in a specific OLT
and return if these PON operational state is UP or DOWN

Dependences

apt install python3
apt install python3-pip
apt install libsnmp-dev snmp-mibs-downloader
apt install gcc python3-dev
pip3 install easysnmp

-----

Usage:

./check_pon_fiberhome [IP_OLT] [SLOT]
Like:
./check_pon_fiberhome 10.10.10.1 1
put only the slot_number after olt IP address

In nagios service.cfg use:
check_command: check_pon_fiberhome!10.10.10.1!1

Configuring nagios

In nagios command.cfg use:
define command{
command_name check_pon_fiberhome
command_line $USER1$/check_pon_fiberhome $ARG1$ $ARG2$
}