/retroflag-picase

RetroFlag Pi-Case Safe Shutdown

Primary LanguageShellMIT LicenseMIT

Contents

GPiCase2 (GPi Case 2 only)

The RetroFlag GPiCase 2 CM4 safe shutdown script will automatically switch between the LCD display and HDMI output when using the dock.

Click the link Jump to install GPiCase2 script：GPiCase2 Script.

GPi Case (GPi Case only)

Turn switch "SAFE SHUTDOWN" to ON.

For RetroPie:

  1. Make sure internet connected.
  2. Make sure keyboard connected.
  3. Press F4 enter terminal.
  4. In the terminal, type the one-line command below(Case sensitive):

wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/install_gpi.sh" | sudo bash

For Recalbox

  1. Make sure internet connected.
  2. Make sure keyboard connected.
  3. Press F4 first. And then press ALT-F2 enter terminal.
  4. User: root Password: recalboxroot
  5. In the terminal, type the one-line command below(Case sensitive):

wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/recalbox_install_gpi.sh" | bash

Pi Case

(nespi+, superpi, megapi, nespi4 case)

RetroFlag Pi-Case Safe Shutdown

Turn switch "SAFE SHUTDOWN" to ON.

RetroPie:

  1. Make sure internet connected.
  2. Make sure keyboard connected.
  3. Press F4 enter terminal.
  4. In the terminal, type the one-line command below(Case sensitive):

wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/install.sh" | sudo bash

RecalBox:

  1. Make sure internet connected.
  2. Make sure keyboard connected.
  3. Press F4 first. And then press ALT-F2 enter terminal.
  4. User: root Password: recalboxroot
  5. In the terminal, type the one-line command below(Case sensitive):

wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/recalbox_install.sh" | bash

Batocera:

  1. Make sure internet connected.
  2. Make sure keyboard connected.
  3. Enter terminal. How to enter terminal: https://wiki.batocera.org/access_the_batocera_via_ssh
  4. User: root Password: linux
  5. In the terminal, type the one-line command below(Case sensitive):

wget -O - "https://raw.githubusercontent.com/RetroFlag/retroflag-picase/master/batocera_install.sh" | bash

Ubuntu

  1. Make sure internet connected.
  2. Make sure keyboard connected.
  3. Enter terminal.
  4. In the terminal, type the one-line command below(Case sensitive):

Ubuntu 20.10 to 21.10: wget -O - "https://raw.githubusercontent.com/rfocosi/retroflag-picase/master/ubuntu_install.sh" | sudo bash

Ubuntu 22.04+: wget -O - "https://raw.githubusercontent.com/rfocosi/retroflag-picase/master/ubuntu22_install.sh" | sudo bash

Example for lakkatv:

https://github.com/marcelonovaes/lakka_nespi_power