rgeyer

rgeyer's Stars

• kk4das/IC746CAT

  ICOM IC-746 Computer Aided Transceiver (CAT) control emulation for Arduino

  Language:C++143

• pavelmc/FT857d

  CAT support for Arduino, simulating a Yaesu FT-857D

  Language:C++4416

• tczerwonka/arduino-ctcss

  Arduino CTCSS generator -- my mods using PA3GUO's code

  Language:C++53

• sh123/libaprs_bluetooth_tnc

  Simple Bluetooth KISS AFSK1200 TNC based on LibAPRS

  Language:C++102

• Diyshift/3D-Printer

  Voron Stuff

  40932

• richonguzman/LoRa_APRS_iGate

  LoRa APRS iGATE for ESP32 Based Board with Rx + Tx capabilities

  Language:Python19763

• lora-aprs/LoRa_APRS_iGate

  This is a LoRa APRS iGate/Digi based on an ESP32

  Language:C344110

• artiommocrenco/meshtastic-prometheus-exporter

  Monitor your meshtastic network with Meshtastic Prometheus exporter

  Language:Python161

• pankleks/WasherOne

  DIY Wash, Dry and Cure station for resin prints

  Language:C++354

• VzBoT3D/Vz-HextrudORT

  Extruder based on MirageC HextrudORT

  8512

• Ramalama2/Voron-2-Mods

  All my mods at one place

  40884

• markqvist/LibAPRS

  An APRS library for the Arduino IDE

  Language:C++19772

• sh123/codec2_talkie

  Turn your Android phone into Amateur Radio Codec2/OPUS APRS enabled DV handheld transceiver (Bluetooth/BLE/USB/TCPIP KISS/Sound modem client for DV digital voice communication)

  Language:Java21538

• PA7FRN/kissTnc

  This is a C++ implementation of KISS TNC software for Arduino

  Language:C++307

• mobilinkd/tnc1

  Mobilinkd TNC1 Firmware

  Language:C5213

• mobilinkd/NucleoTNC

  The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3. It omits the battery charging and Bluetooth components of the TNC3. It presents as a KISS TNC over a USB serial port. This repository contains the build instructions, KiCAD schematics, and firmware source code.

  Language:C9018

• APDMachine/Reaper

  463

• kevinakasam/ERCF_Filament_Cutter

  A simple Filament Cutter for the awesome ERCF!

  20819

• VoronDesign/VoronUsers

  Voron Community mods

  Language:OpenSCAD3k1.9k

• threeme3/usdx

  Simple and experimental (class-E driven) SSB transceiver.

  Language:C++622220

• Frix-x/klippain

  Generic Klipper configuration for 3D printers

  Language:Shell853224

• aprsorg/aprs-deviceid

  APRS device identification data: tocalls.txt + mic-e-types.txt current master allocations (YAML, JSON, XML)

  Language:Perl5323

• VA3HDL/hamdashboard

  Customizable Dashboard for Ham Radio

  Language:HTML9962

• kieraneglin/Thumper-Blocks

  328

• ClawOfDead/ATVRoms

  Documentation for the roms

  Language:Shell51

• fauks/Xnderwire

  222

• Jamiever6/ChironWire

  Anycubic Chiron modification based on Voron Switchwire

  182

• DraftShift/StealthChanger

  Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.

  Language:Python35834

• prasadp4009/SW_SB_CRTouch

  Voron SwitchWire StealthBurner mod for CR Touch (no tools needed)

  161

• boubounokefalos/Ender_SW

  This is a full conversion of the popular Ender 3 Pro/V2 to a Voron Switchwire.

  904108