thrift-tools

Table of Contents

tl;dr
Installing
Tools
Library
Tests

tl;dr

thrift-tools is a library and a set of tools to introspect Apache Thrift traffic.

Installing

You can install thrift-tools via pip:

$ pip install thrift-tools

Or run it from source (if you have the dependencies installed, see below):

$ git clone ...
$ cd thrift-tools
$ sudo FROM_SOURCE=1 bin/thrift-tool --iface=eth0 --port 9091 dump --show-all --pretty
...

Tools

thrift-tool can be used in interactive mode to analyze live thrift messages:

$ sudo thrift-tool --iface eth0 --port 9091 dump --show-all --pretty
[00:39:42:850848] 10.1.8.7:49858 -> 10.1.2.20:3636: method=dosomething, type=call, seqid=1120
header: ()
fields: [   (   'struct',
        1,
        [   ('string', 1, 'something to do'),
            ('i32', 3, 0),
            (   'struct',
                9,
                [   ('i32', 3, 2),
                    ('i32', 14, 0),
                    ('i32', 16, 0),
                    ('i32', 18, 25)])])]
------>[00:39:42:856204] 10.1.2.20:3636 -> 10.1.8.7:49858: method=dosomething, type=reply, seqid=1120
        header: ()
        fields: [   (   'struct',
        0,
        [   ('string', 1, 'did something'),
            ('string', 2, 'did something else'),
            ('string', 3, 'did some other thing'),
            ('string', 4, 'did the last thing'),
            ('i32', 6, 3),
            ('i32', 7, 11),
            ('i32', 8, 0),
            ('i32', 9, 0),
            ('list', 10, [0]),
...

Alternatively, offline pcap files may be introspected:

$ sudo thrift-tool --port 9091 --pcap-file /path/to/myservice.pcap dump
...

Note that you still need to set the right port.

If you are using Finagle, try something like:

$ sudo thrift-tool --iface eth0 --port 9091 dump --show-all --pretty --finagle-thrift
...

JSON output is available for easy filtering & querying via jq. For instance, you can enumerate all the IPs calling the method 'search' via:

$ sudo thrift-tool --port 3030 dump --unpaired --json | jq 'select(.method == "search" and .type == "call") | .src'
"10.1.18.5:48534"
"10.1.60.2:52008"
"10.1.10.27:49856"
"10.1.23.24:48116"
"10.1.26.7:60462"
"10.1.11.10:41895"
"10.1.15.13:35285"
"10.1.7.17:39759"
"10.1.1.19:35481"
...

Gathering per method latency stats is available via the stats command:

$ sudo thrift-tool --port 6666 stats --count 100
method      count         avg         min         max         p90         p95         p99        p999
--------  -------  ----------  ----------  ----------  ----------  ----------  ----------  ----------
search2        61  0.00860996  0.00636292  0.0188479   0.010778    0.015192    0.0174422   0.0187074
doc            39  0.00134846  0.00099802  0.00274897  0.00177183  0.00199242  0.00256242  0.00273031
287 unmatched calls

To list all the available options:

$ thrift-tool --help

Note that for servers with high throughput (i.e.: > couple Ks packets per second), it might be hard for thrift-tools to keep up because start of message detection is a bit expensive (and you can only go so fast with Python). For these cases, you are better off saving a pcap file (i.e.: via tcpdump) and then post-processing it, i.e.:

$ tcpdump -nn -t port 3030 -w dump.pcap
$ sudo thrift-tool --port 3030 --pcap-file dump.pcap stats --count 40000
method      count         avg         min         max         p90         p95         p99        p999
--------  -------  ----------  ----------  ----------  ----------  ----------  ----------  ----------
resize      40000  0.00850996  0.00336091  0.0101364   0.008071    0.009132    0.009890   0.01005665

Library

To use thrift-tools from another (Python) application, you can import it via:

from thrift_tools.message_sniffer import MessageSnifferOptions, MessageSniffer

options = MessageSnifferOptions(
    iface='eth0',
    port='3636',
    ip=None,                         # include msgs from all IPs
    pcap_file=None,                  # don't read from a pcap file, live sniff
    protocol=None,                   # auto detect protocol
    finagle_thrift=False,            # apache thrift (not twitter's finagle)
    read_values=True,                # read the values of each msg/struct
    max_queued=20000,                # decent sized queue
    max_message_size=2000,           # 2k messages to keep mem usage frugal
    debug=False                      # don't print parsing errors, etc
    )

def printer(timestamp, src, dst, msg):
  print '%s %s %s %s' % (timestamp, src, dst, msg)

message_sniffer = MessageSniffer(options, printer)

# loop forever
message_sniffer.join()

Of if you want to use a pcap file:

options = MessageSnifferOptions(
    iface='eth0',
    port='3636',
    ip=None,
    pcap_file="/tmp/myservice.pcap",
    protocol=None,
    finagle_thrift=False,
    read_values=True,
    max_queued=20000,
    max_message_size=2000,
    debug=False
    )

...

If you want to filter messages for specific IPs:

options = MessageSnifferOptions(
    iface='eth0',
    port='3636',
    ip=['172.16.24.3', '172.16.24.4'],  # ignores everyone else
    pcap_file="/tmp/myservice.pcap",
    protocol=None,
    finagle_thrift=False,
    read_values=True,
    max_queued=20000,
    max_message_size=2000,
    debug=False
    )

...

See examples/ for more ways to use this library!

Tests

To run the tests: