Air Quality Sensor

Build a DIY Air Quality Sensor to monitor the condition of the air in your home or office, with options for measuring airborne particulate matter, temperature, humidity, barometric pressure, and volatile organic compounds.

This project is documented in an ongoing video series on SuperHouse:

There are 3 different versions of this project:

The "Basic" version which requires only a Wemos D1 Mini and a Plantower PMS5003 laser particulate matter sensor.
The "Display" version which adds a 128x32 OLED display to the Basic version.
The "Pro" version which is based on a fully custom PCB with an ESP32 MCU, a Plantower PMS7003 sensor, a Bosch BME680 environmental sensor, and a 240x240 colour LCD.

Measurements can be shown locally if a display is fitted, and can also be reported to MQTT over WiFi so that data can be accessed by a home automation system or external database.

"Basic" and "Display" version features:

PMS5003 particulate matter sensor
ESP8266 processor with WiFi
Micro-USB connection for power or reflashing
3D-printable case

"Pro" version features:

PMS7003 particulate matter sensor
BME680 VOC sensor
ESP32 processor with WiFi and Bluetooth
USB-C connection for power or reflashing
3D-printable case

More information is available at:

https://www.superhouse.tv/aqs

Hardware

The "Hardware" directory contains the PCB design as an EAGLE project.

Firmware

The "Firmware" directory contains example firmware as an Arduino project.

Enclosure

The "Enclosure" directory contains STLs for a case that can be 3D-printed.

The two halves of the case should be printed with the flat face down to the printer bed.

The case can be held shut by M3 bolts.

Credits

Jonathan Oxer jon@oxer.com.au

License

The hardware portion of this project is licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository contains a copy of this license in plain text format.