A simple HAP (HomeKit Automation Protocol) bridge for the Orvibo S20 Wifi socket in Swift.
To make this work you need to install the orvibo command line tool and UDP bridge first and run it on the same host using
orvibo -b14443 -u14442 -t2 ac:cf:23:24:25:26
(replacing ac:cf:23:24:25:26 with the MAC address of your orvibo socket).
sudo apt install openssl libssl-dev libsodium-dev libcurl4-openssl-dev
swift build -c release
brew install libsodium
swift build -c release
To build using Xcode, use
brew install libsodium
swift package generate-xcodeproj
open orvibo-udp-hap.xcodeproj
orvibo-udp-hap <options>
Options:
-d print debug output
-f <version> firmware version [1.0.0]
-h <host> host device [127.0.0.1]
-k <accessorykind> light, outlet, or switch
-l <port> listen on <port> instead of 14443
-m <manufacturer> name of the manufacturer [Orvibo]
-n <name> name of the HomeKit bridge [orvibo-udp-hap]
-p <port> broadcast to <port> instead of 14442
-q turn off all non-critical logging output
-s <SECRET_PIN> HomeKit PIN for authentication [123-45-678]
-S <serial> Device serial number [234]
-t <type> name of the model/type [UDP Bridge]
-v increase logging verbosity
The default pin is 123-45-678.