no position when "Send our beacon to APRS-IS" on || Lilygo T3 v1.6.1
Charly1000 opened this issue · 3 comments
Charly1000 commented
env in Visual Stuio Code I'm using: ttgo-lora32-v21
I have set the beaconing menu to "Send our beacon to APRS-IS" to on and "...to RF" to off.
It do not send the location to the APRS-IS network.
jclifford73 commented
See open issue #89 raised by me. The beaconing logic is broken. You may have the path set to blank and it will only beacon with path wide1-1 or maybe other parameters.
73 John GW4BVE
Charly1000 commented
None of the individual settings lead to the desired result. It doesn't work at all.
Charly1000 commented
RESOLVED. It works. I forgot to generate a passcode for config file: https://apps.magicbug.co.uk/passcode/index.php/passcode
so there was no connection to APRS-IS network because of that.