rickdonato/batfish-ansible-dual-tier-fw-demo

Batfish Ansible Dual-Tier FW Demo

Introduction

This repo contains the code, templates and playbooks that accompanies the:
Hands-on Guide to Multi-Tiered Firewall Changes with Ansible and Batfish

• https://packetflow.co.uk/a-hands-on-guide-to-multi-tiered-firewall-changes-with-ansible-and-batfish-part-1/
• https://packetflow.co.uk/a-hands-on-guide-to-multi-tiered-firewall-changes-with-ansible-and-batfish-part-2/
• https://packetflow.co.uk/a-hands-on-guide-to-multi-tiered-firewall-changes-with-ansible-and-batfish-part-3/

Installation

Repo

git clone https://github.com/rickdonato/batfish-ansible-dual-tier-fw-demo
cd batfish-ansible-dual-tier-fw-demo

Create VirtualEnv

make add-venv-py3.6
source venv/bin/activate

VIRL topology

To spin up the VIRL topology run the command:

make start-virl-topology

Any issues stop/remove topology from VIRL UWM UI, and remove the id file via rm .virl/*/id.

Repo Layout

├── ansible
│   ├── ansible.cfg
│   ├── data
│   │   ├── bf_facts
│   │   │   ├── expected
│   │   │   │   ├── db.yml
│   │   │   │   ├── fw1.yml
│   │   │   │   ├── fw2.yml
│   │   │   │   └── websrv.yml
│   │   │   └── extract
│   │   │       ├── db.yml
│   │   │       ├── fw1.yml
│   │   │       ├── fw2.yml
│   │   │       └── websrv.yml
│   │   ├── snapshots
│   │   │   └── snapshot
│   │   │       ├── configs
│   │   │       │   ├── fw1.cfg
│   │   │       │   └── fw2.cfg
│   │   │       ├── hosts
│   │   │       │   ├── db.json
│   │   │       │   └── websrv.json
│   │   │       └── iptables
│   │   │           ├── db.iptables
│   │   │           └── websrv.iptables
│   │   └── templates
│   │       └── hosts.j2
│   ├── inventory
│   │   └── hosts
│   └── playbooks
│       ├── bf_gather_validate_facts.yml
│       ├── bf_init_snapshot.yml
│       ├── bf_validate_acls_flows.yml
│       ├── bf_validate_snapshot.yml
│       ├── create_bf_snapshot.yml
│       └── push_config.yml
├── Makefile
├── README.md
├── requirements.txt
└── topology.virl

Note: The playbooks that use the Batfish modules are named bf_xxxxxx.yml.

Caveats

• VIRL topology - Cisco ASA requires a new key pair to be created on each boot. Therefore crypto key generate rsa general-keys modulus 2048 noconfirm is added to the configuration. This command however is removed if you perform an "extract configs" from within VIRL.