Monitor your Mikrotik router with Prometheus and Grafana

Over the past years I replaced all my networking gear with Mikrotik devices. I absolutely love WinBox for management, but sometimes I miss some fancy charts and graphs. Luckily, RouterOS comes with a REST-API that can be used to query arbitrary data from the device. After some research I found some useful tools and blog posts that solved similar problems. Namely:

Setup

Router running RouterOS 7.x.x
Raspberry Pi 4 with 2 gb RAM (other PIs may also work, but I wanted ARM 64 bit)

Demo pictures

Installation

Mikrotik Router

At first you need to prepare your router.

Create a group on the device that has API and read-only access:

/user group add name=prometheus policy=api,read,winbox,test

Create a user that is part of the group:

/user add name=prometheus group=prometheus password=TOP_SECRET

Prepare Raspi

You need Ubuntu Server for ARM 64 bit in order to use this setup. You may also use Raspian, but then you are limited to 32bit ARM executables. This would mean, that you need to compile the mikrotik-exporter by hand, because there are no pre built 32-bit Docker images.

You need to execute the following steps on the target machine itself (e.g. Raspberry Pi).

Install Python and pip:

sudo apt install python3-dev python3 python3-pip -y

Install Docker + Docker-compose (reboot required)

curl -sSL https://get.docker.com | sh
sudo usermod -aG docker ubuntu
sudo pip3 install docker-compose
sudo systemctl enable docker
sudo reboot

Optional: Build the Docker Image for mktxp

It might be necessary to build the Docker Image for: https://github.com/akpw/mktxp. This is especially the case, if your architecture is not:

linux/amd64
linux/arm/v7
linux/arm64

# Get the mktxp repository
git clone https://github.com/akpw/mktxp.git

# Go into the newly downloaded repo
cd mktxp

# Build the docker image
docker build . -t leonmorten/mktxp:latest

Now get this repo and install all services:

# Clone this repo
git clone https://github.com/M0r13n/mikrotik_monitoring.git


# Go into the cloned directory
cd mikrotik_monitoring

# Let docker-compose do it's job
docker-compose up -d

You may need to adjust the following configuration files and add your own credentials for your router:

mktxp/mktxp.conf

Done. You should now be able to open the Grafana dashboard on Port 3000 of your Raspberry Pi.

Multiple Nodes

It is possible to monitor multiple (Mikrotik) devices. Just change add as many devices to mktxp/mktxp.conf as you want.

HTTPS

It is also possible to access the Grafana Dashboard over HTTPS. Depending on your security requirements and/or threat model it might be a good idea to enable HTTPS.

Generate a self signed certificate for your domain:

sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout ./nginx/nginx-selfsigned.key -out ./nginx/nginx-selfsigned.crt

Replace the content of ./nginx/nginx.conf with:

server {
  listen 80;
	listen [::]:80;
	server_name _;
	return 301 https://$host$request_uri;
}

server {
  listen 443 ssl;
  listen [::]:443 ssl;
  include ssl/self-signed.conf;

  location / {
   proxy_pass http://grafana:3000/;
  }
}

rios0rios0/mikrotik_monitoring