A Window Template Editor with Advanced Features
WinEd is a RISC OS template editor, whose founding aim was "to do everything which TemplEd could do, only better!". It was originally written by Tony Houghton, who developed it until version 2.87 in 2003. Details of this version can be found on the archive of Tony's site. Development was then picked up by Adam Richardson, who continued to maintain and improve WinEd until the release of version 3.22a in 2009. Details of Adam's versions can be found on his website; the major releases were provided via PackMan, and also made available to download.
At the time of writing, the most recent version of WinEd can be found at https://www.stevefryatt.org.uk/risc-os/wined
As of June 2020, this version of WinEd is known to build using the GCCSDK environment, using the following information. In theory it should still build using GCC on RISC OS but, although no changes have knowingly been made to the source to prevent this, it has not been tested.
You will need a copy of the SCL version of DeskLib. The easiest way to obtain this in the GCCSDK is to get the Autobuilder to download and build a copy using the following commands at the prompt.
cd ~/gccsdk/build
../autobuilder/build -v desklib-scl
Alternatively, it is possible to check the sources out from the SVN repository at riscos.info and build direct. From the folder you wish to download DeskLib to:
svn co svn://svn.riscos.info/DeskLib/trunk DeskLib
cd DeskLib/\!DLSources
make -f Makefile.unix install SCL=true
You will need a copy of FlexLib, which comes with the ROOL DDE. This will need to be compiled to an ELF library suitable for use with the GCCSDK, using the compiler options
-mlibscl -mhard-float -static
and installed into the GCCSDK.
If you wish to compile with Fortify, you will need to add the fortify.c, fortify.h
and ufortify.h files into !Wined.Sources. Otherwise, references to fortify will
need to be removed from the Makefile (both the static dependency, and from within the
OBJECTS list at the top).
The definitions for FORTIFY_LOCK() and FORTIFY_UNLOCK() in ufortify.h need to be
changed to empty, as follows:
#define FORTIFY_LOCK()
#define FORTIFY_UNLOCK()
To use Fortify, add -DFORTIFY to the COMPILEFLAGS.
The user documentation is supplied in HTML and Text formats. As of the releases leading up to 3.27 in April 2024, these are being built from a single XML source using XMLMan (which can be built for both RISC OS and Linux).
To allow GCCSDK to find the RISC OS paths used in the source code, it is necessary to set two environment variables:
export DESKLIB_PATH=$GCCSDK_INSTALL_ENV/include/DeskLib
export FLEXLIB_PATH=$GCCSDK_INSTALL_ENV/include
These assume that GCCSDK_INSTALL_ENV has been set; Makefile.unix also assumes this,
however!
The code can be built using by navigating to the !WinEd/Source folder and calling Make:
make -f Makefile.unix
This will build everything from source, and place a complete !RunImage within the
!WinEd folder. If you have access to this folder from RISC OS (either via HostFS,
LanManFS, NFS, Sunfish or similar), it will be possible to run it directly once built.
To clean out all of the build files, use
make -f Makefile.unix clean
To make a release version and package it into Zip files for distribution, use
make -f Makefile.unix release
This will clean the project and re-build it all, then create a distribution archive
(no source) and source archive in the folder within which the project folder is
located. By default the output of git describe is used to version the build, but a
specific version can be applied by setting the VERSION variable -- for example
make -f Makefile.unix release VERSION=3.21
Good luck!
-- Steve Fryatt, June 2020 and March 2024. info@stevefryatt.org.uk