riskable/keycap_playground

Issues

• Adjusting Keycaps stem to go past the inner floor.

  #18 opened 5 months ago by Muramono
  0

• ISO enter key

  #10 opened 2 years ago by Bug38
  2

• Incompatabilities with current openscad / colorscad?

  #16 opened a year ago by Erotemic
  1

• XDA profile seems to be a bit too low

  #17 opened a year ago by Thelvaen
  1

• Setting to make the inside of the keycap flat?

  #8 opened 2 years ago by mvaneijgen
  2

• Square posts

  #12 opened a year ago by AJolly
  1

• STEM_INSIDE_TOLERANCE not proportional on both axis

  #11 opened a year ago by gericho
  0

• Printing legends without unsupported voids

  #9 opened 2 years ago by SirBramble
  0

• Legend help!

  #6 opened 3 years ago by dcscraig
  1

• DSA profile causes hollow walls

  #5 opened 3 years ago by numanair
  1

• Allow the dish to also cut in to the stem part

  #4 opened 3 years ago by mvaneijgen
  0

• (SVG) Graphics in keycap legends

  #3 opened 3 years ago by looselyrigorous
  0

• Stem snap fit numeric values in Customizer do now allow values less than whole numbers

  #2 opened 3 years ago by krissebesta
  0

• Spacebar keys not rotated correctly

  #1 opened 4 years ago by Merlin04
  1