A tool for directly dumping memory chips and identifying on-chip debugging/programming interfaces. Can act as UART-to-USB converter and JTAG adapter.
This adapter converts the GPIO pins of the SEC Xtractor to the JEDEC standardized NAND pin configuration.
This adapter converts the GPIO pins of the SEC Xtractor to the JEDEC standardized NOR pin configuration.
A short documentation for the usage of the SEC Xtractor can be found in the folder documentation. The firmware that is used for the device can be found in the firmware repository.
The following TSOP-48 socket adapters can be used for the NAND and NOR adapter PCBs:
- SXA-TSOP48 SA 247
- SXA-TSOP48 SB 247
For the main ZIF socket, all DIL adapters with 48 or less pins can be used.
SEC Xtractor Revision 1.0:
- Thomas Weber of SEC Consult
SEC Xtractor Revision 1.21:
- Thomas Weber of SEC Consult
SEC Xtractor Revision 1.31:
- Thomas Weber of SEC Consult
NAND adapter revision 1.0:
- Thomas Weber of SEC Consult
NOR adapter revision 1.0:
- Thomas Weber of SEC Consult
NOR adapter revision 1.1:
- Thomas Weber of SEC Consult
The SEC Xtractor design and documentation is distributed under a Creative Commons 4.0 license. This means that you can share and adapt the work, but you must attribute the work to the original author.