jwt-auth: A Go repository from rjturek

JWT-Auth: A generic, and simplistic, authentication plugin for Vault

JWTs are all the rage. They provide a simple way of transmitting claims made by a trusted entity to another. So, if Vault trusts the signer of a JWT, why shouldn't Vault allow that signer to assert claims about an identity? JWTs are bearer tokens, so if the JWT gets compromised then an attacker could use it to gain access to Vault. While this attack vector is something to protect against, it is no different than the compromise of a GitHub personal access token or even a person's LDAP credentials. A nice aspect to JWTs is that they usually have short TTLs, so they are intrinsically safer than GitHub personal access tokens or LDAP credentials (which typically are long lived.)

This plugin is just another tool in the chest for a Vaulter: if you wish to provide access to Vault based upon the bearer of a JWT, then here is your tool. Context is everything, and since Vault gives you choices about how to manage context, this plugin gives you another choice in how to navigate that context.

Delegated Authentication

This plugin can be used in concert with the Trustee plugin to effect delegated authentication.

Build/Install

Building is typically golang:

$ go get github.com/immutability-io/jwt-auth

This will drop the executable in your $GOPATH/bin directory. Alternatively, you can download the latest release from this GitHub repo. If you do this, you should verify the release like this (assuming your current directory is where the files SHA256SUMS.sig and SHA256SUMS reside.)

$ keybase pgp verify -d ./SHA256SUMS.sig -i ./SHA256SUMS

Installation

If you download the release, the zipfile contains a file called SHA265SUM. This is what I got for shasum -a 256 on my build. You will need this value to install the plugin. You can export it into your environment:

$ export SHA256=$(cat SHA265SUM)

Alternatively, if you built the plugin, and it is in the $GOPATH/bin directory do this:

$ export SHA256=$(shasum -a 256 "$GOPATH/bin/jwt-auth" | cut -d' ' -f1)

I assume that you are using TLS to connect to Vault. I assume this because I respect you. Let's say that your Vault configuration resides in: $HOME/etc/vault.d/

A very simple Vault configuration - a laptop special - might look like this:

"default_lease_ttl" = "24h"

"ui" = "true"
"max_lease_ttl" = "24h"
"disable_mlock" = "true"
"backend" "file" {
  "path" = "/Users/immutability/etc/vault.d/data"
}

"api_addr" = "https://localhost:8200"

"listener" "tcp" {
  "address" = "localhost:8200"

  "tls_cert_file" = "/Users/immutability/etc/vault.d/vault.crt"
  "tls_client_ca_file" = "/Users/immutability/etc/vault.d/root.crt"
  "tls_key_file" = "/Users/immutability/etc/vault.d/vault.key"
}

"plugin_directory" = "/Users/immutability/etc/vault.d/vault_plugins"

Note: "api_addr" = "https://localhost:8200". This is important for plugins.

Assuming this configuration - yours may be different, so the following commands may need to be tweaked -the following will install the plugin:

$ mv $GOPATH/bin/jwt-auth $HOME/etc/vault.d/vault_plugins
$ vault write sys/plugins/catalog/jwt-auth \
      sha_256="${SHA256}" \
      command="jwt-auth --ca-cert=$HOME/etc/vault.d/root.crt --client-cert=$HOME/etc/vault.d/vault.crt --client-key=$HOME/etc/vault.d/vault.key"
$ vault auth enable -path=jwt-auth -plugin-name=jwt-auth -description="JWT authentication plugin" plugin

Assuming that worked, you should see something like this when you list your auth endpoints:

$ vault auth list
Path         Type      Description
----         ----      -----------
jwt-auth/    plugin    JWT authentication plugin
token/       token     token based credentials

Configuration

There are 4 main configuration options with this plugin:

Configure the trust - associate the signer key and algorithm with the authentication endpoint.
Configure the claims - choose which claims map to policies.
Configure the IP contraints: choose which IP ranges are allowed to authenticate.
Map policies to claims.

The first 3 options are configured via the config endpoint. Assuming you used the path exemplified above (you can mount this plugin at a variety of paths - this is not a singleton) you configure as follows:

Trust

$ vault write auth/jwt-auth/config jwt_signer=@jwtRS256.key.pub ttl=60m max_ttl=300m

This will establish trust with whatever entity has the private key corresponding to the jwtRS256.key.pub public key.

Claims

The above will use the default claims groups and sub for claim and subject mapping. Since you are probably confused, and example JWT is probably useful now. Consider the following JWT:

This JWT has 2 claims: groups and sub. The sub claim identifies the subject of the JWT - about whom the claims are made. The groups is an statement about attributes of the subject: goober belongs to the test group.

If this is not your JWT schema, then you can change the names of the claims that you want to use to map policies. For example, consider an ADFS JWT:

In this case, you would want to point to different claims - probably groupsid and upn. You would do this thusly:

$ vault write auth/jwt-auth/config jwt_signer=@adfs.key.pub role_claim=groupsid subject_claim=upn ttl=60m max_ttl=300m

Configure IP Constraints

Suppose you only want certain machines to authenticate using this JWT. In that case, you can restrict authentication to a set of CIDR blocks. For example:

$ vault write auth/jwt-auth/config jwt_signer=@adfs.key.pub role_claim=groupsid subject_claim=upn bound_cidr_list="10.23.14.0/22,10.45.12.0/22" ttl=60m max_ttl=300m

Now, when anything tries to authenticate - with a valid JWT token - from an IP address outside of that range it will fail.

Note: IP restrictions are helpful - to some extent - but not really awesome in a containerized world. Stay tuned - I will be merging ideas from my Ethereum plugin with this plugin in the near future. This will address that limitation.

Map policies to claims

Suppose you have 2 policies in Vault:

A user policy called developer; and,
A policy called admin that requires some entitlement (aka, claim in a JWT)

To map the developer policy to a user named goober do the following. (Note: the name goober is identified in the JWT by the subject claim. See #2 above):

$ vault write auth/jwt-auth/map/users/goober value=developer

To map the admin policy to all users that are part of the admin group do the following. (Note: the name admin is identified in the JWT by the role claim. See #2 above):

$ vault write auth/jwt-auth/map/claims/admin value=admin

Usage

Once configured, authentication proceeds as follows:

$ vault write -format=json auth/jwt-auth/login token=@jwt.json
{
  "request_id": "13d0f04e-882f-f83c-7b5a-71807a948feb",
  "lease_id": "",
  "lease_duration": 0,
  "renewable": false,
  "data": null,
  "warnings": null,
  "auth": {
    "client_token": "782b473e-b79a-10bc-50a3-61a44b3937f3",
    "accessor": "ce6611a0-5055-fdc9-8ee4-3e324050d4ec",
    "policies": [
      "default",
      "goober",
      "admin"
    ],
    "metadata": {
      "claims": "[test]",
      "username": "goober"
    },
    "lease_duration": 3600,
    "renewable": true
  }
}

Have fun

And let me know what you like or hate... but be kind, I am very sensitive. :) Note: much of this code was based on the Vault GitHub plugin. I used the same code that I contributed to that plugin for MFA here.

Also, I will be delivering a secrets plugin that allows the creation of JWTs in the near future. This will include some capabilities that should be fun.

Cheers!

rjturek/jwt-auth