rkl099/Appinventor-SerialOTG

Issues

• BT upload - Getting .hex file from different source

  #21 opened 4 months ago by mister0wl
  4

• RX buffer flush

  #20 opened 8 months ago by Diolum
  3

• Slow Data Transmission with FTDI USB to Serial Adapter in SerialOTG V1.5

  #19 opened 9 months ago by hdtran2004
  4

• Upload firmware to esp32

  #18 opened 9 months ago by AILIFE4798
  3

• ESP32C3 Support?

  #16 opened 9 months ago by specternecter
  16

• Issues with Serial Wifi connection

  #17 opened 9 months ago by roka80
  7

• Thanks for this @ Teensy 4.0 USB (CDC) Serial

  #14 opened 9 months ago by manicken
  0

• New Error FLAG_IMMUTABLE or FLAG_MUTABLE

  #15 opened 9 months ago by daniele-v
  2

• Mistakes while using read New line

  #9 opened 3 years ago by romain974
  8

• Arduino nano iot as USB OTG host

  #10 opened 3 years ago by sdetweil
  1

• Bluetooth SPP support

  #6 opened 3 years ago by JOHugo
  32

• Bluepill STM32F103 support

  #7 opened 3 years ago by ronaldbenve
  1

• Connection lost after 5seconds

  #8 opened 3 years ago by DeveloKing
  2

• Stop bits configuration

  #13 opened 3 years ago by Felan412
  7

• Impossible to connect and driver name is empty

  #11 opened 3 years ago by pedro6510
  11

• Can you please add support to VID 10C4 and PID 8C0F silicon labs USB Devices ?

  #12 opened 3 years ago by pedro6510
  0

• Using the USB port while in Genymotion Emulator

  #4 opened 4 years ago by tguneysu
  3

• Ability to use more than one USB port/adapter

  #5 opened 4 years ago by sebastianrds
  1

• micro:bit and Adafruit CLUE support

  #3 opened 4 years ago by tguneysu
  6

• Support for FTDI 4232HL (multiple ports)

  #2 opened 4 years ago by agregg18
  2

• Teensy Serial

  #1 opened 4 years ago by daniele-v
  9