//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
//// Wash-n-Cure Rev 0.9.3
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-WiFi manager installed. OLED will display current IP for 10 seconds upon boot/reboot.
-Over the Air (OTA) updating. Update link is the revision number displayed in the footer.
-Simple web interface employing simple AJAX & JSON to change wash and cure times, commit new times to EEPROM, OTA firmware update (.BIN file), and pause/stop all functions.
-Button functions as:
When no functions are active: SW1 = Starts Cure SW2 = Starts Wash SW3 = EEPROM Menu
Wash or Cure active: SW1 = Run time +1 SW2 = Run time -1 SW3 = Pause Menu
-EEPROM: No times changes are fully committed to EEPROM (reboot will revert back) unless the 'Save Times' function is selected from the web interface or from EEPROM menu.
EEPROM Menu: (User has 10 seconds to make selection, else it exits the menu LOCKING loop)
-SW1 will eeprom.write wash/cure time to 'factory defaults'
-SW2 will eeprom.write wash/cure times if they differ the eeprom.read.
-SW3 will cancel the menu, returning to 'Ready'
-PAUSE: 10 minute timer until StopAll. All web functions are ignored except Pause and Stop.
Pause Menu:
-SW1 will unpause
-SW2 will stopall
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To do:
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Operational testing, ensure the following functions are operational / interoperational:
1 - OTA firmware update & web interface
1 - StopAll function from web interface
1 - Time management from web interface
1 - Time management from button
1 - Pause function from web interface
1 - Pause function from button
1 - Stepper motion control (wash)
1 - Stepper motion control (cure)
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Lib/deps =
http://github.com/scottchiefbaker/ESP-WebOTA
http://github.com/waspinator/AccelStepper
http://github.com/thomasfredericks/Bounce2
http://github.com/adafruit/Adafruit_BusIO
http://github.com/adafruit/Adafruit-GFX-Library
http://github.com/adafruit/Adafruit_SSD1306