rkoshak/sensorReporter

Issues

• Convert to a module

  #113 opened 7 months ago by rkoshak
  4

• use ColorHSV class from utils.py for i2c.pwm actuator

  #128 opened 7 months ago by DanielDecker
  0

• GPIO4 blocked unintentionally

  #131 opened 8 months ago by DanielDecker
  1

• local polling sensor for Connector online state

  #104 opened 8 months ago by DanielDecker
  7

• Kernel 6.6 breaks RpiGpioSensor EventDetection

  #125 opened 9 months ago by DanielDecker
  6

• install script - raspi-config integration

  #122 opened 10 months ago by DanielDecker
  3

• Use de-bounce class in RelayHat actuator

  #112 opened 10 months ago by DanielDecker
  0

• setup script

  #116 opened 10 months ago by DanielDecker
  5

• Support for paho-mqtt 2.0

  #119 opened 10 months ago by rkoshak
  0

• HomeAssistant MQTT discovery

  #115 opened a year ago by dersch81
  1

• MQTT Communicator not consistently publishing

  #111 opened a year ago by rkoshak
  2

• ds18x20 configuration

  #106 opened 2 years ago by DanielDecker
  3

• Do not publish actuators from PollManager report

  #95 opened 2 years ago by rkoshak
  25

• Btn_Pressed_State not optional when PUD is DOWN

  #100 opened 2 years ago by rkoshak
  2

• Implement Homie for MQTT

  #68 opened 2 years ago by rkoshak
  10

• MQTT — Retain Messages

  #81 opened 2 years ago by jamesgoodhouse
  4

• sensor actuator evaluation [enhancement]

  #94 opened 2 years ago by DanielDecker
  3

• debounce possible?

  #98 opened 3 years ago by bks29b
  2

• MQTT does not reconnect if the remote broker is restarted

  #75 opened 3 years ago by darkogorgievski
  4

• Request to update GPIO Readme

  #70 opened 3 years ago by david-r-nielsen
  2

• SIGHUP results in GPIO error [bug]

  #91 opened 3 years ago by DanielDecker
  2

• add support for sensor pushbuttons

  #88 opened 3 years ago by DanielDecker
  3

• Log level set on class level [bug?]

  #90 opened 3 years ago by DanielDecker
  1

• Update openHABRestAPI to work with OH 3's authentication

  #76 opened 3 years ago by rkoshak
  5

• connect mutliple sensor_reporter via mqtt

  #87 opened 3 years ago by DanielDecker
  2

• GPIO Actuator always works in "TOGGLE" Mode, steady state output is not possible

  #72 opened 3 years ago by darkogorgievski
  6

• Bad Command Actuator

  #83 opened 4 years ago by computeq
  7

• Goove Sensor do not work. Logs show that modules are missing

  #73 opened 4 years ago by idrovof
  1

• README of openhab folder error

  #74 opened 4 years ago by xvdessel
  0

• active_low

  #66 opened 4 years ago by brononius
  7

• Heartbeat.py does not send frequent messages

  #65 opened 4 years ago by dersch81
  5

• Python Thread Error

  #63 opened 4 years ago by msw1970
  4

• Having more than two MQTT actuators makes receipt of MQTT commands unreliable

  #56 opened 4 years ago by rkoshak
  2

• Make options consistent

  #33 opened 4 years ago by rkoshak
  1

• sensorReporter 2.0 and Homie Support

  #64 opened 4 years ago by rkoshak
  1

• [rpiGPIOActuator.py] ON and OFF msg commands do not work

  #55 opened 6 years ago by bgilmer77
  4

• Enhancement to rpiGPIOSensor

  #42 opened 7 years ago by Mr-Eskildsen
  13

• Make dependence on Bluez optional when using BTLE detection

  #52 opened 7 years ago by rkoshak
  0

• Add logging level setting to the ini file

  #48 opened 7 years ago by rkoshak
  0

• Deprecate and remove gpioSensor.py

  #47 opened 7 years ago by rkoshak
  0

• Add comments to default.ini to explain Toggle

  #34 opened 7 years ago by rkoshak
  0

• Loop and try again if the MQTT Broker isn't online when sensorReporter starts

  #39 opened 7 years ago by rkoshak
  0

• Fresh Install On RPi3 Causes IndentationError

  #57 opened 7 years ago by msw1970
  8

• Q: BT detection of paired devices?

  #53 opened 7 years ago by Bibo-Joshi
  2

• Typing error in bluetoothScanner.py

  #50 opened 7 years ago by FoxRomeo
  1

• Not Really an Issue

  #43 opened 7 years ago by markrad
  4

• Support BLE

  #40 opened 7 years ago by tigre-bleu
  1

• Please add support for hping sensor

  #38 opened 7 years ago by johannesbonn
  1

• ConfigParser.NoOptionError: No option 'syslog' in section: 'Logging'

  #37 opened 8 years ago by ludodoucet
  0

• Inconsistent startup

  #35 opened 8 years ago by rkoshak
  1