Adds support for the Hi-Link HLK-SW16 16 channel WiFi/Ethernet Relay.
- Turn on the device by plugging in the power
- Connect via Wi-Fi to the access point of the device, the name starts with "HI-LINK_"
- Go to
http://192.168.16.254
, default username and passwordadmin
- In the menu, click
HLK-WR02
>Serial2Net Settings
- Change
NetMode
toWIFI(CLIENT)-SERIAL
- Enter the
SSID
,Encrypt Type
andPassword
for your wireless network - Change
IP Type
toSTATIC
- Enter the
IP Address
,Subnet Mask
,Default Gateway
andDNS Servers
for your local network - Click
Save
- Install the app from the Homey app store: https://homey.app/a/net.hlktech.relay
- Using the Homey app, add a new device choosing Hi-Link from the list of installed apps
- Enter the IP Address and Port for your Relay. By default the port is 8080.
- Select which channels of the relay you would like to add to your Homey. The channel order on the board is:
2xEthernet
ch16 ch15
ch14 ch13
ch12 ch11
ch10 ch9
ch8 ch7
ch6 ch5
ch4 ch3
ch2 ch1
Power + Serial