----------------- quartet_conductor ----------------- Python module for machine and IoT interfaces. ===== Hosts ===== For testing and deployment using this in general, the host names that are used in the unit tests and default configurations are as follows: * scanner * printer * revpi You can add these host names to your hosts file with the appropriate IP addresses and you should be good to go. ================= VideoJet Port 777 =================NO The videojet printer needs to have it's text communications port set to a non-zero value. For conductor, it assumes you have set the port to 777. Please use this port to avoid any confusiont Label Fields ============ The default label fields are as follows: * LOT - The lot number * EXPIRY - The expiration date * GTIN - The GTIN field. * SERIAL_NUMBER - The serial number field. Any other fields are fine but will be ignored. Settings ======== The following django settings are available. This is the print rule used by the Input Monitor DEFAULT_PRINT_RULE="VideoJet Print" The number of seconds before a telnet connection will timeout. TELNET_TIMEOUT=3 Whether or not to roll over to a default serial range if an explicit GTIN range is not defined in serialbox. USE_DEFAULT_RANGE=True