This project aims to sniff and inject bluetooth low energy (BLE) using a micro:bit. We are using radiobit's from project code. See their work here : https://github.com/virtualabs/radiobit.
git clone https://github.com/virtualabs/radiobit
pip install uflash
To be able to see what the micro:bit prints, you need to use the serial communication interface. See here : https://www.microbit.co.uk/td/serial-library
For macos and linux users, you are going to use screen
- Install screen.
- Attach a screen to the micro:bit serial communication system.
ls /dev/cu.usb* will give you the serial communication system name
screen /dev/cu.usb<replace with micro:bit name> 115200 will attach a screen to the micro:bit serial communication system.
Then you should be good to go !
If there is a problem connecting to the device, you probably need to kill a current detached screen with pkill screen
You can check the current living screens with screen -ls
Now you can flash the micro:bit with our program and the radiobit firmware.
uflash -r <replace with the path to radiobit repo>/radiobit/precompiled/radiobit.hex <replace with the path to this repo>/ssi_project/<program_you_want_to_use>.py
Example : uflash -r .\radiobit\precompiled\radiobit.hex .\ssi_project\snif.py