rnd-ash/ultimate-nag52-fw

Issues

• FEATURE - MAXX / Other custom ECU byte aligned CAN layer

  #74 opened 10 months ago by rnd-ash
  3

• EGS3 CAN Layer info on W204.048's 4MATIC is incorrect

  #77 opened 7 months ago by Brainiarc7
  2

• Extra definitions for FCOD_MOT

  #68 opened a year ago by diamondo25
  0

• Correctly send min/max/custom torque requests to engine ECU

  #9 opened 2 years ago by rnd-ash
  2

• V2 PCB - TRRS support

  #27 opened 2 years ago by rnd-ash
  0

• M113 + M113K engine ignores torque request

  #23 opened 2 years ago by rnd-ash
  3

• In Comfort Mode the start in second gear is broken

  #56 opened 2 years ago by viper-666
  2

• Future Request: Use W/S switch for changing of the driving profile

  #50 opened 2 years ago by viper-666
  2

• Line has no efect

  #51 opened 2 years ago by chrissivo
  1

• EGS CAN Matrix database for pre 2006 modules

  #31 opened 2 years ago by rnd-ash
  3

• Improve auto drive logic

  #7 opened 3 years ago by rnd-ash
  1

• Race / launch control

  #8 opened 3 years ago by rnd-ash
  2

• EGS/EGS51 support - Tracking issue

  #26 opened 2 years ago by rnd-ash
  0

• EGS CAN Layer (Pre 2000)

  #28 opened 2 years ago by rnd-ash
  0

• Add EGS_SPRINTER CAN HAL Layer

  #16 opened 3 years ago by rnd-ash
  0

• Measure and adapt torque converter clutch filling time

  #14 opened 3 years ago by rnd-ash
  0

• Refine ATF temp calculations

  #2 opened 3 years ago by rnd-ash
  1

• Fix flaring / flare detection mitigation

  #3 opened 3 years ago by rnd-ash
  1

• Handle N to D engagement whilst in motion

  #4 opened 3 years ago by rnd-ash
  0

• Handle TCM reset whilst in motion

  #5 opened 3 years ago by rnd-ash
  0

• Request engine emergency stop in transmission runaway situation

  #6 opened 3 years ago by rnd-ash
  0

• Document testing approach

  #1 opened 3 years ago by rusefillc
  2