Issues
- 9
Sadly, the author has passed away :(
#53 opened by svenove - 6
- 0
Trying to maintain a active fork
#55 opened by gskjold - 1
Question - NodeMCU Boards
#47 opened by BergAutomations - 0
Alternative linear regulator
#49 opened by DIYglenn - 0
Metal film resistors
#48 opened by DIYglenn - 0
HAN ESP, should the PCB be updated?
#50 opened by DIYglenn - 1
Ground loop?!!
#51 opened by DIYglenn - 1
PCB ordering
#46 opened by zerblatt007 - 4
Make page for contributions
#25 opened by roarfred - 1
[Bug] Selected Meter Aidon and Kamstrup
#41 opened by xibriz - 2
OTA firmware update
#27 opened by roarfred - 3
Improvements for Arduino code
#40 opened by xibriz - 0
Defaults for web page
#42 opened by roarfred - 0
- 0
Add png image for PCB layout of HAN_TTL_TSS721
#16 opened by roarfred - 1
- 1
Boot as AP to set wifi / mqtt parameters
#26 opened by roarfred - 1
yield() in loop for debugging received data
#34 opened by roarfred - 3
- 0
Update examples
#33 opened by roarfred - 0
Update main readme
#30 opened by roarfred - 2
Arduino Examples does not compile
#24 opened by roarfred - 1
- 1
Resistor R8 should not be used
#3 opened by roarfred - 1
Redesign Board001 using KiCad
#18 opened by roarfred - 2
Rename boards
#13 opened by roarfred - 2
Reprogrammering
#21 opened by KarlNorway - 1
Add png image for schematicts of Board002
#14 opened by roarfred - 1
Add png image for PCB layout of Board003
#17 opened by roarfred - 1
Add png image for schematicts of Board003
#15 opened by roarfred - 1
Board 2 - PoE
#19 opened by Bullhill - 3
DLMS/COSEM
#10 opened by Ben1902 - 4