This is a fork of https://github.com/ooyala/quagga-cookbook. The functionality here is much different, and this cookbook is not backwards comptaible.
This cookbook provides an interface via attributes to serveral Quagga daemons. It's written with the intention of deploying Quagga on Cumulus switches, and managing router configuration as code.
This cookbook currently supports the following daemons:
- BGP
- OSPF
- Zebra
Tested on:
- Cumulus Linux 1.5.3
- Cumulus Linux 2.5.11
- Ubuntu 14.04
NOTE! Where you see "String or Array" for type, a String may be used only for single values. Use an Array of Strings for multiple values.
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['router_id'] |
Router-id to use for all protocols. This is superseded by protocol-specific router-ids, if they are defined. | String | nil |
node['quagga']['enable_reload'] |
Must be true in to enable reloading the quagga service (only applies to certain versions). | Boolean | true |
node['quagga']['max_instances'] |
Sets /etc/defaults/quagga "MAX_INSTANCES" value. | Integer | 5 |
node['quagga']['integrated_vtysh_config'] |
Must be set to true in order to reload quagga (vs restart) on config changes. Details here and here. | Boolean | false |
node['quagga']['multiple_instance'] |
Must be set to true in order to support multiple routing-instances or vrfs. Supported in Cumulus Linux 2.5.3SE and adopted in Cumulus Linux 3.0. | Boolean | false |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['bgp'] |
A hash containing the BGP processes and their configuration. Keys are the local ASNs/processes (Integer), values are the data for that process (Hash). | Hash | {} |
node['quagga']['bgp'][$LOCAL_ASN]['router_id'] |
Sets the router-id for this BGP process. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['redistribute'] |
Route types to redistribute into BGP (eg: ["connected","ospf"]. |
String or Array | nil |
node['quagga']['bgp'][$LOCAL_ASN]['hold_time'] |
BGP hold time (must also set keepalive_interval). |
Integer | nil |
node['quagga']['bgp'][$LOCAL_ASN]['keepalive_interval'] |
BGP keepalive interval (must also set hold_time). |
Integer | nil |
node['quagga']['bgp'][$LOCAL_ASN]['max_paths'] |
Maximum number of ECMP paths. | Integer | nil |
node['quagga']['bgp'][$LOCAL_ASN]['multipath_relax'] |
Allow for ECMP of different ASNs. | Boolean | false |
node['quagga']['bgp'][$LOCAL_ASN]['compare_routerid'] |
Enable comparison of the router-id during best path selection. | Boolean | false |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'] |
A hash containing neighbors and their configuration. Keys are the neighbor IPs or group names (String), values are the data for that neighbor or group (Hash). | Hash | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['peer_group'] |
Set to true if this is a peer-group. |
String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['peer_type'] |
The neighbor peer type to use with interface or peer-group. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['remote_as'] |
The remote-as for this neighbor. | Integer | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['connect_timer'] |
Time in seconds between connection attempts. | Integer | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['default_originate'] |
Set to true to advertise a default route to this neighbor. |
Boolean | false |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['default_originate_v6'] |
Set to true to advertise a default ipv6 route to this neighbor. |
Boolean | false |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['default_originate_map'] |
The name of the route-map to use with default-originate. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['default_originate_map_v6'] |
The name of the v6 route-map to use with default-originate. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['peer_group_range'] |
The IP range(s) to permit for this group (BGP Dynamic Neighbors). | String or Array | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['soft_reconfig_in'] |
Enable soft-reconfiguration-inbound (to enable dispaly of received routes). | Boolean | false |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['prefix_list_in'] |
Name of the prefix-list to use for filtering incoming routes. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['prefix_list_out'] |
Name of the prefix-list to use for filtering outgoing routes. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['prefix_list_in_v6'] |
Name of the prefix-list to use for filtering ipv6 incoming routes. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['prefix_list_out_v6'] |
Name of the prefix-list to use for filtering ipv6 outgoing routes. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['route_map_in'] |
Name of the route-map to use for filtering incoming routes. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'][$NEIGHBOR]['route_map_out'] |
Name of the route-map to use for filtering outgoing routes. | String | nil |
node['quagga']['bgp'][$LOCAL_ASN]['address_family'] |
A hash containing address families and their configuration. Keys are the family-type names (String), values are the data for that family (Hash). | Hash | nil |
node['quagga']['bgp'][$LOCAL_ASN]['address_family'][$FAMILY]['redistribute'] |
Route types to redistribute into BGP (eg: ["connected","ripng","ospf6"]. |
String or Array | nil |
node['quagga']['bgp'][$LOCAL_ASN]['address_family'][$FAMILY]['max_paths'] |
Maximum number of ECMP paths in the address family. | Integer | nil |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['ospf']['router_id'] |
Sets the router-id for OSPF. | String | nil |
node['quagga']['ospf']['reference_bandwidth'] |
Sets the reference bandwidth for OSPF. | String | nil |
node['quagga']['ospf']['redistribute'] |
Route types to redistribute into OSPF (eg: ["connected","bgp"]. |
String or Array | [] |
node['quagga']['ospf']['passive_default'] |
Set passive-interface default (Active interfaces must be defined). needs tests | Boolean | true |
node['quagga']['ospf']['passive_ints'] |
Names of passive interfaces. | String or Array | nil |
node['quagga']['ospf']['areas'] |
A Hash containing areas and their configurations. Keys are the area IDs (eg: 0.0.0.0), values are the data for that area. | Hash | {} |
node['quagga']['ospf']['areas'][$AREA]['networks'] |
Networks to include in the area. | String or Array | nil |
node['quagga']['ospf']['areas'][$AREA]['stub_area'] |
Make specific area a stub area | Boolean | nil |
node['quagga']['ospf']['networks'] |
needs description & tests. | String or Array | [] |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['ospf6']['router_id'] |
Sets the router-id for OSPF. | String | nil |
node['quagga']['ospf6']['reference_bandwidth'] |
Sets the reference bandwidth for OSPF. | String | nil |
node['quagga']['ospf6']['redistribute'] |
Route types to redistribute into OSPF (eg: ["connected","bgp"]. |
String or Array | [] |
node['quagga']['ospf6']['areas'] |
A Hash containing areas and their configurations. Keys are the area IDs (eg: 0.0.0.0), values are the data for that area. | Hash | {} |
node['quagga']['ospf6']['areas'][$AREA]['interfaces'] |
Interfaces to include in the area. | String or Array | nil |
node['quagga']['ospf6']['areas'][$AREA]['stub_area'] |
Make specific area a stub area | Boolean | nil |
node['quagga']['ospf6']['networks'] |
needs description & tests. | String or Array | [] |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['prefix_lists'] |
A hash containing all of the prefix-lists to configure in quagga. Keys are the prefix-list names, values are hashes filled with the entries. | Hash | {} |
node['quagga']['prefix_lists'][$LIST] |
A hash containing all of the entries in a particular $LIST. Keys are sequence numbers, values are hashes filled with the details of the entry. | Hash | {} |
node['quagga']['prefix_lists'][$LIST][$SEQ]['prefix'] |
The prefix affected by this rule (must be x.x.x.x/x or x::x/x or any_v6 for any ipv6 prefix). If left out, rule will match any ipv4 prefix |
String | any |
node['quagga']['prefix_lists'][$LIST][$SEQ]['ge'] |
The minimum prefix length to accept (eg: 24 or 128) |
Integer | nil |
node['quagga']['prefix_lists'][$LIST][$SEQ]['le'] |
The maximum prefix length to accept (eg: 24 or 128) |
Integer | nil |
node['quagga']['prefix_lists'][$LIST][$SEQ]['action'] |
The action to take (either 'permit' or 'deny'). | String | nil |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['route_maps'] |
A hash containing all of the route-maps to configure in quagga. Keys are the route-map names, values are hashes filled with the entries. | Hash | {} |
node['quagga']['route_maps'][$MAP] |
A hash containing all of the entries in a particular $MAP. Keys are sequence numbers, values are hashes filled with the details of the entry. | Hash | {} |
node['quagga']['route_maps'][$MAP][$SEQ]['action'] |
The action to take (either 'permit' or 'deny'). | String | nil |
node['quagga']['route_maps'][$MAP][$SEQ]['set'] |
A hash containing all the actions to set when mapping the route (must be a identified below). If left out the rule will not do anything | Hash | {} |
node['quagga']['route_maps'][$MAP][$SEQ]['set']['aggregator'] |
The aggregator AS as well as the aggregator IP address | Hash | {} |
node['quagga']['route_maps'][$MAP][$SEQ]['set']['aggregator'] |
Hash containing the aggregator AS and IP address | Hash | {} |
node['quagga']['route_maps'][$MAP][$SEQ]['set']['aggregator']['as'] |
The aggregator AS | Integer | nil |
node['quagga']['route_maps'][$MAP][$SEQ]['set']['aggregator']['ip'] |
The aggregator IP address | String | nil |
node['quagga']['route_maps'][$MAP][$SEQ]['set']['local_preference'] |
The local prefernce to set on the route | Integer | nil |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['static_routes'] |
A hash containing static routes to configure. This will work for ipv4 and ipv6 static routes. Keys are the prefixes, values are the next-hop addresses. | Hash | nil |
node['quagga']['static_routes'][$ROUTE] |
The next-hop address for given $ROUTE | String | any |
| Attribute | Description | Type | Default |
|---|---|---|---|
node['quagga']['multiple_instance'] |
Must be set to true in order to support multiple routing-instances or vrfs. Supported in Cumulus Linux 2.5.3SE and adopted in Cumulus Linux 3.0. | Boolean | false |
node['quagga']['interfaces'][$IF_NAME] |
The interface you wish to assign to a routing table followed by a specific table. | Array | nil |
node['quagga']['bgp'][$LOCAL_ASN]['neighbors'] |
A hash containing neighbors and their configuration. Local ASN need to have the table specified. Keys are the neighbor IPs or group names followed by (String) values for that neighbor or group (Hash). | Hash | nil |
node['quagga']['static_routes'][$ROUTE] |
A hash, with a specified table, containing static routes to configure. Keys are the prefixes, values are the next-hop addresses. | Hash | nil |
Simply set the desired attributes (see Attributes section above) then call the proper recipe (quagga::bgpd, quagga::ospfd). There is also a provider for zebra, but no recipe as of yet.
The following example will create BGP process 64512 with dynamic neighbors. Devices in the 10.0.0.0/8 range ('hosts' peer-group) will be able to peer with this process. A regular neighbor 192.168.52.1 is configured here also. Neighbors in the group and the normal neighbor will receive a default route when peered with this instance.
node.set['quagga']['bgp']['64512']['log_neighbor_changes'] = true
node.set['quagga']['bgp']['64512']['neighbors']['hosts']['remote_as'] = 64512
node.set['quagga']['bgp']['64512']['neighbors']['hosts']['default_originate'] = true
node.set['quagga']['bgp']['64512']['neighbors']['hosts']['peer_group'] = true
node.set['quagga']['bgp']['64512']['neighbors']['hosts']['peer_group_range'] = '10.0.0.0/8'
node.set['quagga']['bgp']['64512']['neighbors']['192.168.52.1']['remote_as'] = 64512
node.set['quagga']['bgp']['64512']['neighbors']['192.168.52.1']['default_originate'] = true
include_recipe 'quagga::bgpd'The following example will create BGP process 64511 with unnumbered neighbors. We are also required to set the address family when working with these interfaces.
node.set['quagga']['bgp']['64511']['neighbors']['swp1']['peer_type'] = 'interface'
node.set['quagga']['bgp']['64511']['neighbors']['swp1']['remote_as'] = 64512
node.set['quagga']['bgp']['64511']['neighbors']['swp1']['soft_reconfig_in'] = true
node.set['quagga']['bgp']['64511']['neighbors']['swp1']['ipv6'] = true
node.set['quagga']['bgp']['64511']['address_family']['ipv6'] = {}
include_recipe 'quagga::bgpd'The following example will create an OSPF area 0, with quagga reload enabled and an OSPF-specific router-id. All interfaces with addresses in 10.0.0.0/8 will actively participate in OSPF, except for the ones explicitly listed as :passive_ints.
node.set['quagga']['integrated_vtysh_config'] = true
node.set['quagga']['ospf']['router'-id] = 10.0.0.1
node.set['quagga']['ospf']['passive_default'] = false
node.set['quagga']['ospf']['areas'][0.0.0.0]['networks'] = '10.0.0.0/8'
node.set['quagga']['ospf']['passive_ints'] = ['lo', 'br-access']
include_recipe 'quagga::ospfd'The following example will create a static route to 10.0.0.0/24 using the next hop of 172.16.1.1
node.set['quagga']['static_routes']['10.0.0.0/24'] = '172.16.1.1'
include_recipe 'quagga::zebra'The following example will create a routing table with a static route, a bgp neighbor and a specific interface all on table 100.
node.set['quagga']['multiple_instance'] = true
node.set['quagga']['interfaces']['swp1 table 100'] = []
node.set['quagga']['bgp']['64512 table 100']['neighbors']['1.1.1.1']['remote_as'] = 64512
node.set['quagga']['static_routes']['10.0.0.0/24'] = '172.16.1.1 table 100'Any form of contribution is welcome! Feature requests, bug reports, pull requests, whatever! If you add features, make sure there are tests for them, and if you change any code, make sure the existing tests all pass before creating a pull request.
Tests are run on a Cumulus VX VM using serverspec.
Testing requirements:
- Vagrant
- VirtualBox
To run the tests (after installing prerequisites):
bundle installrake rubocopbundle exec rake integration:vagrantfoodcritic .
| Role | Individual |
|---|---|
| Author (pre-0.2) | Ooyala Inc. |
| Maintainer (0.2+) | Ian Clark |
| Contributor | James Farr Gomez |
Copyright 2014, Ooyala Inc.
Copyright 2015-2017, Contributers
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.