robot-army/ESP_WeatherStation

Issues

• pin out for cheaper screen?

  #12 opened 9 years ago by garytech
  4

• this is def an issue - NO STENCIL!!

  #11 opened 9 years ago by garytech
  1

• Move USB connector towards edge

  #10 opened 9 years ago by robot-army
  0

• Move tracks away from edges

  #9 opened 9 years ago by robot-army
  0

• Move tracks away from mounting holes

  #1 opened 9 years ago by robot-army
  1

• temp sensor too hot - remove found plane?

  #2 opened 9 years ago by garytech
  1

• mounting holes incorrect

  #3 opened 9 years ago by garytech
  1

• break out with pull ups for alternative sensors - i2c + vcc, data, gnd

  #4 opened 9 years ago by garytech
  1

• Add BOM parts for the passives

  #6 opened 9 years ago by robot-army
  0

• Fix 0805_handsolder components to not be so massive

  #7 opened 9 years ago by robot-army
  0

• Assign a reasonable minimum passive component size

  #8 opened 9 years ago by robot-army
  0

• high frequency noise from screen??

  #5 opened 9 years ago by garytech
  1