/stlinkv2_solver

Ubuntu upgrader firmware ST-LINK V.2

Primary LanguageShell

Upgrade Frimware ST-LINK

This package contains the installer for USB ST-Link probe related .rules files. It will install in directory /etc/udev/rules.d/ the following files: 49-stlinkv2-1.rules 49-stlinkv2.rules 49-stlinkv3.rules and 49-stlinkv1.rules. Note that a file is provided for ST-Link/V1 despite most toolsets do not support it.

To install st-stlink-udev-rules for Linux on your system use one of the package provided. The package to use depends on your machine distribution but also on your system knowledge.

  1. Go To stlink directory

  2. Go To AllPlatforms directory

  3. Go To StlinkRulesFilesForLinux directory

  4. Then Type this command

    sudo dpkg -i ./st-stlink-udev-rules-1.0.3-2-linux-all.deb

  5. And run sudo apt update

  6. Debug Your STM32

Another OS installation

  • RPM-based distribution (Redhat, Centos, Suse, Fedora...) As root user:

    • either run: sudo rpm -Uhv st-stlink-udev-rules-xxxx-linux-noarch.rpm
    • or use the dedicated software package manager from your system

  • Debian-based distribution (Debian, Ubuntu...) As root user:

    • either run: sudo dpkg -i st-stlink-udev-rules-xxxx-linux-all.deb
    • or use the dedicated software package manager from your system

  • Any/other distribution (but prefer one of the native method above if you can) As root user

    • run: sudo sh st-stlink-udev-rules-xxxx-linux-noarch.sh