The version 2 branch of FreeRADIUS is officially end of life (EOL). We may push security fixes for safety reasons, but no more.
i.e. THERE WILL BE NO MORE RELEASES OF VERSION 2.
Anyone using version 2 is strongly recommended to ugprade to version 3. Questions on the freeradius-users mailing list about version 2 will be answered with a recommendation to upgrade to version 3.
The FreeRADIUS Server Project is a high performance and highly configurable AAA server. Is available under the terms of the GNU GPLv2. It has been in steady development for over a decade. It is the most widely used RADIUS server in the world, by quite a large margin.
AAA stands for "Authentication, Authorization, and Accounting". The server can do any or all of the AAA functions, across three protocols: RADIUS, DHCP, and VMPS. The reason is that at its core, it is a policy engine. The policy engine connects network protocols to back-end systems such as SQL, LDAP, Active Directory, etc.
FreeRADIUS started out as a RADIUS server, of course. We then added VMPS and DHCP when it became clear that doing so was both easy and useful.
It supports all popular authentication methods for RADIUS. This includes PAP, CHAP, MS-CHAP, EAP, etc. It works with all known networking equipment. The authors of FreeRADIUS have written the official specifications for how RADIUS works (RFC 5080 and RFC 6158, among others). It is compliant with all RADIUS standards. This means that if a NAS does not inter-operate with FreeRADIUS, the most likely reason is that the NAS is wrong.
FreeRADIUS can authenticate users on systems such as 802.1x (WiFi), dialup, PPPoE, VPN's, VoIP, and many others. It supports back-end databases such as MySQL, PostgreSQL, Oracle, Microsoft Active Directory, OpenLDAP, and many more. It is used daily to authenticate the Internet access for hundreds of millions of people, in sites ranging from 10 users, to 10 million and more users. It is used in appliances, WiFi boxes, ISPs, enterprises, and large telecommunications providers.
Version 2.2 of the server is intended to be backwards compatible with previous versions. It has features not available in Version 1, many of which are also not available in any commercial server.
- simple policy language (see
man unlang) - virtual servers (raddb/sites-available/README)
- DHCP support (server and relay)
- VMPS support
- IPv6 support
- better proxy support (raddb/proxy.conf)
- More EAP types
- verbose and descriptive Debugging output
- Almost 50 "stable" modules, and many more experimental ones.
- Sample SQL configuration for all major SQL databases.
- Some support for on-the-fly changing of configuration (HUP)
- check configuration test (
radiusd -C) - Event-based server core.
Please see http://freeradius.org and http://wiki.freeradius.org for more information.
To install the server, please see the INSTALL file in this directory. In general, we recommend using a pre-packaged installation for your operating system.
RADIUS systems can be complicated to configure. Unlike a simple "query-response" protocol such as DNS, RADIUS systems need to juggle large amounts of information. There may be dozens of attributes in the request. Processing the request may involve querying any or all of LDAP, SQL, flat files, external scripts, etc.
There is no easy solution to creating a working RADIUS configuration.
The only method that works is to run the server in debugging mode,
(radiusd -X) and READ the output. We cannot emphasize this point
strongly enough. The vast majority of problems can be solved by
carefully reading the debugging output, which includes WARNINGs about
common issues, and suggestions for how they may be fixed.
Read the FAQ. Many questions are answered there. See the Wiki
Read the configuration files. Many parts of the server have NO documentation, other than comments in the configuration file. That being said, there are dozens of examples in the configuration files. The configuration items are extensively commented, with all of their behavior documented.
Search the mailing lists. Many questions come up repeatedly, and are answered there. There is a Google link on the bottom of the page:
http://www.freeradius.org/list/users.html
Type some key words into the search box, and you should find discussions about common problems and solution.
See 'doc/README' for more information about FreeRADIUS.
See raddb/sites-available/README for documentation on virtual servers.
We understand that the server may be difficult to configure, install, or administer. It is, after all, a complex system with many different configuration possibilities.
The most common problem is that people change large amounts of the configuration without understanding what they're doing, and without testing their changes. The preferred method of operation is the following:
- Start off with the default configuration files.
- Save a copy of the default configuration: It WORKS. Don't change it!
- Run the server in debugging mode. (radiusd -X)
- Send it test packets using "radclient", or a NAS or AP.
- Verify that the server does what you expect.
- If it does not work, change the configuration, and go to step (3) If you're stuck, revert to using the "last working" configuration.
- If it works, proceed to step (6).
- Save a copy of the working configuration, along with a note of what you changed, and why.
- Make a SMALL change to the configuration.
- Repeat from step (3).
This method will ensure that you have a working configuration that is customized to your site as quickly as possible. While it may seem frustrating to proceed via a series of small steps, the alternative will always take more time. The "fast and loose" way will be MORE frustrating than quickly making forward progress!
If you have any comments, bug reports, problems, or concerns, please send them to the 'freeradius-users' list (see the URL above). We will do our best to answer your questions, to fix the problems, and to generally improve the server in any way we can.
Please do NOT complain that the developers aren't answering your questions quickly enough, or aren't fixing the problems quickly enough. Please do NOT complain if you're told to go read documentation. We recognize that the documentation isn't perfect, but it does exist, and reading it can solve most common questions.
The list policy changed in mid 2012, due to the high volume of inappropriate posts from a subset of users. These users would refuse to read the documentation, even when asked to. They would ask questions, and then refuse to follow the instructions given them on the list. They would argue over the answers given on the list, even when it was clear that they understood less about RADIUS than the people trying to help them.
The new policy is to warn people engaging in this asocial behavior. If they continue after a warning, they are unsubscribed and banned permanently from the list.
The decision to enforce etiquette came after over 10 years of having a more open policy. Sadly, a small subset of users abused the help given by the volunteers on the list. This behavior is unacceptable, and will not be tolerated.
FreeRADIUS is the cumulative effort of many years of work by many people, and you've gotten it for free. No one gets paid to work on FreeRADIUS, and no one is getting paid to answer your questions.
If you want the community to help you, you need to make it easy for the community to help you.
Support is available. See http://networkradius.com/.
Please submit bug reports, suggestions, or patches. That feedback gives the developers a guide as to where they should focus their work. If you like the server, feel free to mail the list and say so.