pca9536-driver

Easy-to-use python driver for the PCA9536 GPIO expander.

Installation

The package is available on PyPI. Installation is can be done with your favourite package manager. For example:

pip install pca9536-driver

Usage

In order to initialise the device we need an open SMBus object. Depending on the machine that you are running on you may need to provide another bus number or path:

from pca9536 import PCA9536
from smbus2 import SMBus


with SMBus(1) as bus:
    device = PCA9536(bus=bus)

The address of the PCA9536 defaults to 0x41. This is the (fixed) address of the PCA9536 devices, so you should never have to change it. If you do want to change it, you can provide it like PCA9536(bus=bus, address=0x42).

Controlling a pin

The PCA9536 has four GPIO pins, which are represented by PCA9536Pin objects that can be accessed by using index brackets:

pin = device[0]

If desired, you can loop over all pins:

for pin in device:
    ...

Reading the logic level of the pin is done with the read() method, which returns a boolean:

logic_level = pin.read()

To switch the pin to output mode and write the logic level:

from pca9536 import PinMode

pin.mode = PinMode.output  # or use "output"
pin.write(True)

Note that writing only sets the output flip-flops of the GPIO expander, and has therefore no effect when the pin is in input mode.

Simultaneous operations

If you have the need to read from, write to or set the mode of multiple pins simultaneously, then you can use the respective methods and properties of the PCA9536 object.

Reading returns a tuple of four booleans:

pin_0, pin_1, pin_2, pin_3 = device.read()

Writing can be done to one or more pins at the same time:

device.write(pin_0=True, pin_2=False)

Setting the same mode of all pins to the same value:

device.mode = PinMode.input

or specify a value per pin by providing a tuple of four values:

device.mode = PinMode.input, Pinmode.output, "input", None

Note that also here the values PinMode.input and PinMode.output may be used interchangeably with the strings "input" and "output". Providing None for any of the values will leave the mode of the respective pin unchanged.

Polarity inversion

The PCA9536 offers functionality to invert the polarity of the input bits. Note that the outputs are not affected by this setting.

Polarity inversion of a single pin can be enabled by:

pin.polarity_inversion = True

Polarity inversion of all pins can be set at the same time in a similar manner to that of the pin mode:

device.polarity_inversion = False
# or
device.polarity_inversion = False, True, True, None