hvac-app

This is the source code component of an embedded HVAC controller. The hardware design component is hvac-eda.

The system is designed to run on a Raspberry Pi, and I am currently using it to control the HVAC in my home. Some aspects of the system are hard-coded into the source code, such as the external sensors and their Modbus addresses/registers. Using different parts (or a different setup) would require improving the code to allow further customization through the configuration file or modifying the code directly.

Features

Currently, the system implements the functions of a basic thermostat, an ERV controller, and a humidifier controller, with minimal correlation between the three of them. The goal is to create a smarter controller by adding correlation to optimize the energy consumption and overall system efficiency.

The following features/functions are already implemented:

Reading of external temperature/humidity sensors over Modbus.
Basic thermostat control with dual heat/cool mode and distinct setpoints for cooling and heating.
Basic HRV/ERV control with fixed recirculation/intermittent/low/high settings.
Basic humidifier control with a single humidity setpoint and water flow control though water valve pulse length modulation.
Embedded JSON based REST API over HTTP for controlling the run mode (heating, cooling, etc.), adjusting the setpoints, and reading status and sensor data.
Embedded HTML/JavaScript web UI for controlling the system.
Data telemetry to an external time-series database for graphic visualization, logging and analysis purposes. Currently graphite is supported.
Built-in emulator (of the sensors and control peripherals) that allows the code to be run and tested on any standard system.

Motivation

What happens in my home stays in my home. Most (all?) commercially available solutions share anything and everything they can with the cloud service of their manufacturer. And yes, privacy does matter.
The ability to control the HVAC in my home even if my internet connection stops working.
The ability to integrate all HVAC subsystems (furnace/ERV/humidifier) into a single centralized controller to optimize energy consumption and overall system efficiency.
The ability to fiddle with the control algorithms, experiment and improve.
To have fun. I am a professional software designer, but also an electronics hobbyist and enthusiast.

Prerequisites

Install required packages (Debian/Ubuntu/Raspbian)

sudo apt install cmake libmodbus-dev libgpiod-dev libsystemd-dev civetweb libcivetweb-dev libcjson-dev

Install required packages (Fedora)

sudo dnf install cmake libmodbus-devel libgpiod-devel systemd-devel cjson-devel

civetweb

Get the source code:

git clone https://github.com/civetweb/civetweb.git
cd civetweb
git checkout v1.13

Build:

cmake -B output/build -DCMAKE_BUILD_TYPE=None -DCIVETWEB_BUILD_TESTING=OFF -DBUILD_SHARED_LIBS=ON
make -C output/build
cmake -DCMAKE_INSTALL_PREFIX=output/install -P output/build/cmake_install.cmake

Install:

sudo cp -df output/install/bin/civetweb /usr/local/bin/
sudo cp -df output/install/include/civetweb.h /usr/local/include/
sudo cp -df output/install/lib64/libcivetweb.* /usr/local/lib64/

Add /usr/local/lib64 to the linker path (temporarily):

sudo ldconfig /usr/local/lib64

Add /usr/local/lib64 to the linker path (permanently):

echo /usr/local/lib64 | sudo tee /etc/ld.so.conf.d/local.conf
sudo ldconfig

See RHBZ #144967

Build instructions

Debug build

cmake -B build -DCMAKE_BUILD_TYPE=Debug
make -C build

Release build

cmake -B build -DCMAKE_BUILD_TYPE=Release
make -C build

Debug build with emulator enabled

cmake -B build -DCMAKE_BUILD_TYPE=Debug -DWITH_EMULATOR=ON
make -C build

CMake configuration using the Text User Interface (TUI)

ccmake -B build

If configuring for the first time, use the c option to create an initial configuration. Otherwise, the -B command line parameter can be omitted.

Install instructions

sudo cp build/hvac /usr/local/bin/
sudo mkdir -p /usr/local/etc/hvac
sudo cp config.json.sample /usr/local/etc/hvac/config.json
sudo mkdir -p /usr/local/share/hvac
sudo cp -rf web /usr/local/share/hvac
sudo mkdir -p /var/local/hvac
sudo chown pi: /var/local/hvac
sudo mkdir -p /usr/local/lib/systemd/system
sudo cp systemd/hvac.service /usr/local/lib/systemd/system
sudo systemctl daemon-reload
sudo systemctl enable --now hvac
sudo civetweb -A /usr/local/etc/hvac/htpasswd api user 1234

Web API examples

curl -i -u user:1234 --digest http://localhost:8080/api/sensordata
curl -i -u user:1234 --digest http://localhost:8080/api/ctrldata
curl -i -u user:1234 --digest http://localhost:8080/api/rundata
curl -i -u user:1234 --digest -X POST -d '{"furnace_mode": "heat"}' -H "Content-Type: application/json" http://localhost:8080/api/rundata

rrendec/hvac-app