IoT-SecurityChecker

This software was developed as part of my Master degree thesis project @ University of Milan in order to automate the discovery and exploitation process of IoT devices. This project aims to be a starting point for further research, a framework to be enriched with new modules, exploits and techniques. Actually IoT-SecurityChecker is able to identify any device present inside a network using a port scan application (masscan), perform different brute-force attacks and probe some IoT exploits against the identified targets to validate the presence of known vulnerabilities.

Main Features

Below is provided a list of the main activity and probe that IoT-SecurityCheker is able to perform:

Service discovery and banner grabbing with masscan
SSH Bruteforce
FTP Bruteforce
TELNET Bruteforce
HTTP Bruteforce
Cisco-PVC-2300 Exploit
DLink dcs-lig-httpd Exploit
h264_dvr_rce Exploit Exploit
Humax HG100R-* Authentication Bypass Exploit
/rom-0 information disclosure Exploit
Trendnet TV-IP410WN Exploit
CVE-2017-17101 Exploit (tested but NOT IN THE SOURCE due to responsible disclosure)

Architecture

The Knowledge DB file (here you can see a small sample) contains all the information and data that have been acquired during the knowledge-building phase of the thesis. It can be updated on the fly as new information are collected (for example looking for a new IoT product, exploit or manufacturer).
The Scanner manages and starts the hosts discovery process, you can find all the ports and configuration in the dedicated class. The scanning operations are run using masscan (https://github.com/robertdavidgraham/masscan).
Bruteforcers classes are capable of executing a dictionary attack on the following services: ftp, telenet, ssh, http basic. The dictionary provided as wordlist are built based on the knowledge (in this repo you can find only small wordlists used for demo purpose).
Exploit classes are able to execute a set of exploits that addresses well-know IoT vulnerabilities. As for dictionary, the exploits list derives from the knowledge. The available exploits are 5 (plus one not public):
- Cisco-PVC-2300 : the web camera Cisco PVC-2300 is affected by several vulnerabilities that may allow a unauthenticated user to login and access to multiple functionalities. The developed exploit tries to login and download the device configuration to read username and password
- Dlink : a set of Dlink webcams are affected by different vulnerabilities that mainly permits OS command injection. The developed exploit test each one of these vulnerabilities
- h264-dvr-RCE : a set of devices identified by the caption that have been used by several companies may suffer Remote Command Injection. This vulnerability allows an attacker to execute any command on the vulnerable device. The exploit verifies the vulnerabilities attempting to crete a file on the target device.
- Humax-HG100R: the Humax Wifi Router is vulnerable to Authentication Bypass attack by sending specific crafted request to the management console. If the console is public exposed an attacker can exploit it and may get access to confidential information.
- Rom-0 : a set of network appliances from companies such as ZTE, TP-Link, ZynOS and Huawei are vulnerable to Authentication Bypass attacks. An attacker can access confidential data sending a crafted HTTP request to the /rom=o resource
- TV-IP410wn: Trendnet TV-IP410WN webcams are vulnerable to Remote Command Execution attacks. The developed exploits verifies the vulnerability by executing the ls command on the target device.
- CVE-2017-17101: several webcams and baby monitors from Apexis company are vulnerable to Credential Injection. An attacker by using a crafted http request may obtain full admin access. This vulnerability has been discovered during this work and has been marked by CVE-2017-17101.
The Engine manages all operations and exchanges of information through all modules. The user can set up the scan and then the Engine is in charge of starting the scanning, redirect data to parser and then DBs, setting up the execution of the Exploiter and Authenticator based on the results.
Utils provides a series of functionality, for example validate input and output.
The Parser classes handle and filter outputs from many different tools integrated in the software and create also a human readable output.

Setup & Run

Install masscan, following the instruction (https://github.com/robertdavidgraham/masscan) and optionally patch it in order to add the timestamp field inside the scan output (https://hml.io/2016/01/20/masscan-logging-demystified/)
Clone this repo:

git clone https://github.com/c0mix/IoT-SecurityChecker.git
cd IoT-SecurityChecker

Install all the decencies by running:

pip3 install -r requirements.txt

Configure and tune your knowledge base and your wordlists by editing the following files:

/resources/iotDetectionKeyword.txt
/resources/wordlists/FTP_credentials.txt
/resources/wordlists/HTTP_credentials.txt
/resources/wordlists/SSH_credentials.txt
/resources/wordlists/Telnet_credentials.txt

Run the program giving sudo privileges or with root user:

sudo python3 IoT-SecurityChecker.py <target> <options>

Case Study

We run the IoT Security Checker in a custom scenario that have been built specifically to satisfy the tools characteristics. The following figure shows the networks with all nodes. The experimental scenario is composed by a private network containing the scanner node, a vulnerable wireless cam and a Cloud Nas. All nodes access Internet through a Netgear router. A Wireless cam and a remote router are added to the scenario and reachable from the private network through Internet. The IoT Security Checker was executed from the scanner node with following command:

sudo python3 IoT-SecurityChecker.py target.txt -m 300 -w 15 -E ALL -B ALL -T 2 -o result.csv

Where target.txt contains three different targets: the private network (192.168.0.0/24) and the two public IPs (109.115.179.138, 13.113.110.137). -m 300 -w 15 are specific parameters to instruct masscan on how to run the scan. In details, they require to use no more than 300 packages for second and wait 15 seconds once the scan is done to get the results. -B ALL -E ALL -T 2 instructs Authenticator (-B) and Exploiter (-E) to run all possibile authentications and exploits but using a maximum of 2 threads. -o results.csv specifies to store the final results in csv format in result.csv file.

IP	Port	Service	Module	Notes
192.168.0.10	23	Telnet	TelnetAuthenticator	Telnet Access found username: adm password:
192.168.0.9	23	Telnet	TelnetAuthenticator	Telnet Access found username: adm password:
192.168.0.9	22	SSH	SSHAuthenticator	SSH Access found username: test password: admin
192.168.0.9	21	FTP	FTPAuthenticator	FTP Access found username: anonymous password:
192.168.0.9	21	FTP	FTPAuthenticato	FTP Access found username: user password: test
13.113.110.137	81	HTTP	HttpAuthenticator	Http Access found username: test password: test
109.115.179.138	80	HTTP	Rom-0	http://109.115.179.138:80/rom-0
192.168.0.10	80	HTTP	CVE-2017-17101	http://192.168.0.10:80 new credentials are admin:hacked

Reference & Thanks

I wanna thank Enrico Milanese who inspired and really helped me with this project.
Thanks to researchers of the University of Milan Sesar Lab, in particular Prof. Marco Anisetti, Dott. Filippo Gaudenzi and Prof. Claudio Ardagna
Many thanks to all the researchers that inspired me with their work and effort to make these devices safer (see the link in the main feature section)

Disclaimer

This software was not tested in a real "wild" environment, use at your own risk!

rtfeng/IoT-SecurityChecker