rusefi/alphax-4chan

Issues

• Kia start request - revisit external resistor

  #171 opened 2 months ago by rusefillc
  1

• Not enough memory on 4Chan F7 on a script that ran on F4?

  #186 opened 2 months ago by ElDominio
  1

• M54 wired as PNP has odd issues in cylinders 5 and 6

  #182 opened 4 months ago by ElDominio
  8

• need boot times of under 350ms for car that expects fast CAN

  #184 opened 3 months ago by ElDominio
  1

• IN_CAM2_VR is not in dropdown list for triggers

  #183 opened 3 months ago by ElDominio
  0

• Fancy Hardware is not visible

  #181 opened 5 months ago by ElDominio
  1

• BBQ

  #180 opened 5 months ago by rusefillc
  2

• Can High side Outputs drive VVT solenoids

  #173 opened 10 months ago by ElDominio
  10

• Boot time has increased

  #178 opened 6 months ago by ElDominio
  2

• Output High1 not suitable for alternator control

  #179 opened 6 months ago by ElDominio
  0

• fab rev i

  #177 opened 7 months ago by rusefillc
  3

• Tacho pin in use on legacy tacho pin

  #174 opened 8 months ago by ElDominio
  4

• Request: Can 4chan firmware build have things that will never be used REMOVED?

  #175 opened 8 months ago by ElDominio
  3

• enable accelerometer

  #172 opened 10 months ago by rusefillc
  1

• Make Battery Voltage read from A2 (main relay) instead of F7

  #166 opened a year ago by ElDominio
  15

• 3D pcb with main connector and USB

  #170 opened a year ago by rusefillc
  2

• Rev. g AIN3 pulldown

  #137 opened a year ago by Qwerty-OFF
  2

• P1 adjust main connector DO NOT CLOSE UNTIL LIBRARY CHANGED

  #145 opened a year ago by rusefillc
  6

• use 9924 on one of VR channels

  #160 opened a year ago by rusefillc
  4

• Time to remove more jumpers

  #169 opened a year ago by rusefillc
  0

• Inj5 and Inj6 have no LED? RevH

  #167 opened a year ago by ElDominio
  1

• Tacho pin error with RevB

  #165 opened a year ago by ElDominio
  2

• maybe it kind of works [was Split packages for legacy 4chan (revF and before) and current 4chan (revG and above)]

  #152 opened a year ago by ElDominio
  5

• Use MAX992x based VR on CKP+/-

  #147 opened a year ago by ElDominio
  1

• 4chan stuck boot looping

  #153 opened a year ago by ElDominio
  6

• Can CKP-/CMP- be used as hall inputs

  #156 opened a year ago by ElDominio
  1

• ETB error? Calibrates ok but fails to control instantly

  #158 opened a year ago by ElDominio
  1

• Cannot use D3 on revH

  #154 opened a year ago by ElDominio
  4

• C4 2step not working?

  #155 opened a year ago by ElDominio
  2

• schematics transparency

  #168 opened a year ago by rusefillc
  2

• .ini magic: Add all processor pins to output and inputs

  #159 opened a year ago by ElDominio
  1

• PB pedal calibration

  #164 opened a year ago by rusefillc
  3

• Make ETB page reusable

  #163 opened a year ago by rusefillc
  4

• document ETB capacitors

  #162 opened a year ago by rusefillc
  2

• 4chan digital inputs stim status

  #161 opened a year ago by rusefillc
  2

• C7 Pin is pulling to 12v why

  #157 opened a year ago by ElDominio
  1

• Pin E2 Out NOS not working, correct processor pin? On revH

  #150 opened a year ago by ElDominio
  7

• both old and new boards assign both old and new EN pins for no reason

  #151 opened a year ago by rusefillc
  0

• RevH Tacho output not working but changing between 5v/12v

  #143 opened a year ago by ElDominio
  3

• Pin Aux2 Inj5 in use on revH

  #148 opened a year ago by ElDominio
  3

• rev H: Pin D3 Digital in 2, is processor pin correct?

  #149 opened a year ago by ElDominio
  3

• Has tacho drive pin changed from revision F to revision G?

  #146 opened a year ago by ElDominio
  2

• some pads are missing on GTP and GBP layer

  #144 opened a year ago by rusefillc
  1

• rev H arrived without molex J6

  #140 opened a year ago by rusefillc
  2

• p1 & P2 part numbers

  #142 opened a year ago by rusefillc
  1

• про тахометр

  #141 opened a year ago by rusefillc
  0

• Fix BOM (see warnings.log)

  #139 opened a year ago by andreika-git
  2

• K24 cam sensor not reading

  #135 opened a year ago by ElDominio
  1

• We need to find all changes of pinout between different board revisions

  #138 opened a year ago by andreika-git
  0

• Configurable pulls for AUX connector

  #136 opened a year ago by Qwerty-OFF
  0