rusefi/hw_modular

Issues

• *DEPRECATED* rusEFI prototyping hardware => reposititory should be set to "archived" and README.md updated

  #40 opened a year ago by mi-hol
  1

• RJ45 small breakout

  #38 opened 4 years ago
  0

• CJ125 missing a trace VCCsomething

  #37 opened 4 years ago
  4

• ETB board IN1 & IN2 needs pull-downs 0.5M

  #34 opened 5 years ago
  1

• ETB board LEDs

  #36 opened 5 years ago
  0

• ETB board lower R4 & R5 resistors to about 2.2K

  #35 opened 5 years ago
  0

• TLE7209 needs BOM csv

  #6 opened 5 years ago
  1

• analog board - label should be "0.2" now

  #2 opened 5 years ago
  1

• Tle8888 jlcpcb fab files

  #29 opened 5 years ago
  0

• Analog board - jlcpcb fab files

  #28 opened 5 years ago
  0

• TLE7209 - cap should be 100uf in addition to 100nf

  #22 opened 5 years ago
  1

• TLE7209 needs larger vias behind chip to allow soldering

  #20 opened 5 years ago
  3

• TLE7209 is it possible to place all SMD components on same side to facilitate JLCPCB pre-assembly?

  #23 opened 5 years ago
  1

• analog board - prepare JLCPCB files

  #24 opened 5 years ago
  0

• TLE7209 DIS pull-down and EN pull-up

  #21 opened 5 years ago
  2

• 8888 module schematics missing 3 LEDs

  #17 opened 5 years ago
  1

• 8888 board - need 0R instructions

  #16 opened 5 years ago
  1

• 8888 board C15,C12 need value

  #5 opened 5 years ago
  1

• analog inputs board main chip

  #7 opened 5 years ago
  1

• unify capacitors if possible

  #4 opened 5 years ago
  2

• 8888 board - R23, R23 we need to rename L1, L2

  #3 opened 5 years ago
  1