CANAL View Qt GUI for TouCAN series USB to CAN bus converter
Init string parameters:
1 2 3 4 5 6 7
device_type ; device_serial_number ; speed ; tseg1 ; tseg2 ; sjw ; brp
where:
1 - device type: for TouCAN,TouCAN Marine,TouCAN Duo this paramer is always == 0
2 - device serial number: always 8 symbols like 12345678
serial number you can find on bottom device case side like sn:12345678
3 - CAN bus speed: standard speed list: 10;20;50;100;125;250;500;1000
4 - CAN bus parameter tseg1
5 - CAN bus parameter tseg2
6 - CAN bus parameter sjw
7 - CAN bus parameter brp
If standard speed list is used next arguments can be skipped.
For example init string will looks like 0;12345678;1000
For non standard CAN bus speeds: speed parameter must be == 0
For example 1000 kbit speed init string will looks like: 0;12345678;0;7;2;2;5
where: tseg1 = 7, tseg2 = 2, sjw = 2, brp = 5
CAN interface clock is : 50MHz
CAN bus parameters calculator: http://www.bittiming.can-wiki.info