oniontrace: A C repository from rxcomm

OnionTrace

This program records and plays back Tor circuit building and stream assignment. It can also register for several asynchronous Tor events and logs the events as they are received from Tor over time.

Setup

Dependencies in Fedora/RedHat:

sudo yum install cmake glib2 glib2-devel

Dependencies in Ubuntu/Debian:

sudo apt-get install cmake libglib2.0-0 libglib2.0-dev

Build with a custom install prefix:

mkdir build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=/home/$USER/.local
make

Optionally install to the prefix:

make install

Usage

oniontrace arguments should be configured as follows: arguments="oniontrace key=value ..."

The valid keys and the type of the valid values are listed below, along with any defaults. The format is:

key:ValueType (default=val) [Mode=ValidMode] - explanation

Specifying the run mode is optional, the default mode is log:

Mode:String (default=log) [Mode=record,play,log]
Valid values for the running mode are record, play, and log.
record mode records circuit creation and stream assignment schedules.
play mode creates circuits and assigns streams according to a
schedule as previously recorded with record mode. log mode registers for async events and logs them to stdout as they occur.

The following are required arguments (default values do not exist):

TorControlPort:Integer [Mode=record,play,log]
The Tor Control server port, set in the torrc file of the Tor instance that
you want to trace.

The following are optional arguments (default values exist):

LogLevel:String (default=info) [Mode=record,play,log]
The log level to use while running oniontrace. Valid values are:
debug > info > message > warning
Messages logged at a higher level than the one configured will be filtered.
TraceFile:String (default=oniontrace.csv) [Mode=record,play]
The filename to write the trace when in record mode, or read a previously
recorded trace when in play mode.
RunTime:Integer (default=0) [Mode=record,play]
If positive, OnionTrace will stop running after the number of seconds
specified in this value. In record mode, this has the effect of recording
all circuits that are being tracked even if those circuits have not yet
been closed by Tor.
Events:String (default=BW) [Mode=log]
The asynchronous Tor events for which we should listen and log when
we receive them from Tor. The value string should be a comma-delimited list
of events, e.g., 'BW,CIRC,STREAM'. See Section 4.1 of the
'Tor control protocol' specification for a full list of acceptable events.
(https://gitweb.torproject.org/torspec.git/tree/control-spec.txt)

Tor Changes Required for record Mode

In order for the record mode to work correctly, we need Tor to export the socks username in all stream control events. That will allow us to keep the the same streams on the correct circuits when using playback mode to play back a recorded trace file.

If the original stream control event is this:

650 STREAM 21 NEW 0 11.0.0.6:18080 SOURCE_ADDR=127.0.0.1:21437

We need to change Tor so that it outputs events like:

650 STREAM 21 NEW 0 11.0.0.6:18080 SOURCE_ADDR=127.0.0.1:21437 USERNAME=MYUSER

Where MYUSER is the SOCKS username in use to tie that stream to a circuit. Here is a patch that was created to do this for tor-0.3.5.8, which may help you understand how to change a newer version of Tor to export the correct info.

diff --git a/src/feature/control/control.c b/src/feature/control/control.c
index cc7ecff2f..fac51eb38 100644
--- a/src/feature/control/control.c
+++ b/src/feature/control/control.c
@@ -5904,16 +5904,28 @@ control_event_stream_status(entry_connection_t *conn, stream_status_event_t tp,
       purpose = " PURPOSE=USER";
   }
 
+  /* send socks username along with stream events. */
+  char user[64];
+  int do_user = (conn->socks_request && conn->socks_request->username) ? 1 : 0;
+
+  if(do_user) {
+    char* u_null_term = tor_memdup_nulterm(conn->socks_request->username,
+        conn->socks_request->usernamelen);
+    tor_snprintf(user, 64, " USERNAME=%s", u_null_term);
+    free(u_null_term);
+  }
+
   circ = circuit_get_by_edge_conn(ENTRY_TO_EDGE_CONN(conn));
   if (circ && CIRCUIT_IS_ORIGIN(circ))
     origin_circ = TO_ORIGIN_CIRCUIT(circ);
   send_control_event(EVENT_STREAM_STATUS,
-                        "650 STREAM %"PRIu64" %s %lu %s%s%s%s\r\n",
+                        "650 STREAM %"PRIu64" %s %lu %s%s%s%s%s\r\n",
                      (ENTRY_TO_CONN(conn)->global_identifier),
                      status,
                         origin_circ?
                            (unsigned long)origin_circ->global_identifier : 0ul,
-                        buf, reason_buf, addrport_buf, purpose);
+                        buf, reason_buf, addrport_buf, purpose,
+                        do_user ? user : "");
 
   /* XXX need to specify its intended exit, etc? */

rxcomm/oniontrace

OnionTrace

Setup

Usage

Tor Changes Required for record Mode