23.10 Xorg configuration testing
paulwratt opened this issue · 1 comments
I am transferring a bunch of (late night your time , early morning my time ) posts from the Discord to here, try to de-clutter the Discord channels (if I can).
@paulwratt — 2023/10/31 at 10:27 AM
I have not been able to get X running, so I cant use FireFox on that machine yet. X did a core-dump (and hang) the 1st time I ran it (as root), but it just quits if I startx as a user "unknown display: t2-5700G:0", when it doesn't core-dump and (looks like a) hang
paulwratt — 2023/10/31 at 10:35 AM
xauth: (argv):1: bad display name "t2-5700G:0" in "remove" command
VT switchinit: connection to X server lost
am I having problems with the default Xorg configuration because I have a - symbol in the hostname?
@r2t2 — 2023/10/31 at 10:51 AM
I have seen this sometimes, should probably have debugged where this regression is coming from 😕
which gpu is this? or VM?
@paulwratt — 2023/10/31 at 11:10 AM
amdgpu - but I also noticed in ... /xor.conf.d/ that there is both 10-amdgpu.conf and 10-radeon.conf although the screen and card sections reference driver=amdgpu .
its the internal GPU for the 5700G on an Asus Tuff Gaming B550M Plus (WiFi)
@paulwratt — 2023/10/31 at 11:22 AM
I too like the idea of a PID. dont have to grep a special PS then. I think that last entry in rocknet_dhcp is missing another line:
addcode down 5 6 "sleep 1; ip link set $if down"
@paulwratt — 2023/10/31 at 12:45 PM
Hmm .. I just ran /etc/init.d/xcfgt2 start and it says X Driver: radeon
and there is no SystemID either
OK that "no SystemID" is because dmidecode (and ddcprobe) is not install on the base ISO
( I am using t2-23.10-x86-64-minimal-firefox-gcc-musl-nocona.iso )
@paulwratt — 2023/10/31 at 1:00 PM
xcfgt2 has 2 ways of picking up the graphics card, the one it is showing me is the one from lspci which looks for a VGA, but if that fails, the fallback is /sys/class/graphics/fb0/name and on my setup that is amdgpudrmfb
@paulwratt — 2023/10/31 at 1:08 PM
note that the fallback if either of those fail (older graphics card) is to look in uname -m for i*86|x86*64 and use vesa otherwise use fbdev, but this kernel outputs x86-64 and we already know from above that it should choose fbdev on this machine - it never gets to keep the output of this section tho, because in ..
the next section, the 1st match is for radeon so ..
there should be a selection before that that reads:
*amdgpu*) xdrv=amdgpu
and probably have 2x checks for the card so you can print the lspci entry, but if there is anything in ../fb0/name then it should use that to match for the correct driver
@paulwratt — Yesterday at 1:21 PM
BTW I have an old P4 with an HD5470 PCI, so I could (potentially) test t2 for a valid Radeon card
RE: 2x gfx card checks: or add a clause after that CASE section, like the check for xdrv=nv
@paulwratt — 2023/10/31 at 1:32 PM
Hmm .. I am not 110% sure but I think there is an X Windows DRM graphics driver specifically called amdgpudrmfb. EDIT: I might have confused that with DRI ..
(I am going of some vague items I saw on the RPi and using DRM in an xorg.conf)
@paulwratt — 2023/10/31 at 5:35 PM
ok, did some changes, and the result is ... exactly the same as the 1st time I ran it as root, VT7 has a blinking cursor, But VT5 (where I run it from) is blank, and when I (gracefully) kill xinit there is a bunch of XFCE errors (WARNINGs actually, all with the wrong EOL characters), and :
No window manager registered on screen 0. To start the xfdesktop without this check, run with --disable-um-check
and that same xauth: error posted above.
@paulwratt — 2023/10/31 at 5:44 PM
Note that is the same end result as when Xorg is run with the radeon driver too
I would need console soft-scrollback to be able to debug this any further
I looked at the Arch Linux wiki:
@paulwratt — 2023/10/31 at 5:51 PM
https://wiki.archlinux.org/title/Xorg#AMD
Xorg
and I checked their reference with WikiPedia:
https://en.wikipedia.org/wiki/List_of_AMD_graphics_processing_units#Features_overview
List of AMD graphics processing units
The following is a list that contains general information about GPUs and video cards by AMD, including those by ATI Technologies before 2006, based on official specifications in table-form.
amdgpu is the correct driver for a VEGA class GPU (like the one in the 5700G)
@r2t2 — 2023/10/31 at 8:21 PM
Best run config less. Xcfgt2 is an old thing from when a config was needed
I mostly left it for illustration purposes ONLY
I missed this post for some reason ???
@paulwratt — 2023/11/01 at 12:09 AM
Just spent a couple of (11.5?) hours looking at the output of :
X -verbose 6 > ~/xlog.txt 2>&1
and it appears that after much copy and pasting, editing and reviewing, that the failure might be due to the disconnected DisplayPort using Monitor1 and the connected HDMI NOT having a Monitor section (oh joy)
@paulwratt — 2023/11/01 at 12:17 AM
Well at least I got Modelines out of it, and an EDID text binary blob 🙂
After I have pushed some of these post install fixes, I can do another install processing.
I don't mind updating xcfg2 if it becomes useful again.
I'd like to get a working no-config boot straight into X after 1st or 2nd reboot, even if that requires fixing some stuff.
If there are some other partitioning related stuff, I'd like to burn thru that as well, because altho I can probably do infinite test installs on this machine, I do need the partitions to be fixed (unchanging) at some point so I can start work on some other projects.
To that end one of the 1st things I want to get set in STONE ( sic ) is a working hybrid partition scheme. I have a P4 that I can test BIOS boot on, and it has a PCI HD5470 which i would like to get " booting to X after 1st or 2nd reboot " too.